Video není dostupné.
Omlouváme se.
How to Fix Samsung Dryer Not Heating | Common Problem, Easy Repair
Vložit
- čas přidán 31. 07. 2021
- How to Fix Samsung Dryer Not Heating // I will walk you through this Samsung dryer heating element replacement step by step and hopefully get your dryer up and running again so you can get back to your coffee :-)
🟢 Heating Element for Samsung Electric Dryer DC47-00019A or Whirlpool 35001247
USA: amzn.to/3p5gxrG
CAN: amzn.to/3pcG1TS
🚀 Did this video help you?
➤ Buy Me a Coffee: www.buymeacoff... ☕
---------------------------------------------------------------------------------------------------------
🔷️MORE WASHER & DRYER REPAIRS:
➤➤ Samsung Dryer Wont Start But Has Power
• Samsung Dryer Wont Sta...
➤➤ Replace the Dryer Belt On Any Front Clothes Dryer
• Replace the Dryer Belt...
-----------------------------------------------------------------------
***LET'S CONNECT:
Facebook: / crowelake
Getting It Done North Of 7 Instagram - / rolandnorthof7
Thank you for watching this how to fix Samsung dryer not heating video!
- Roland
Disclaimer: This video may contain affiliate links, which means that if you choose to make a purchase, we will earn a small commission. Please understand that we have experience with these products, and we recommend them because they are helpful and useful, not because of the small commissions we make.
#dryernotheating #samsungdryer #dryernotdrying
🟢 *Heating Element for Samsung Electric Dryer DC47-00019A or Whirlpool 35001247*
USA: amzn.to/3p5gxrG
CAN: amzn.to/3pcG1TS
Just a heads up to anyone doing this repair. The edges of the sheet metal are extremely sharp. I sliced my thumb knuckle unplugging the connecter to the lid, and had to get stiches.
I have a dryer exactly like the one in your video. I got the top and screws off. But the front won't lift. The top will pull off, but the whole bottom will not move.
How do I tell if it is the heating element or the main circuit board?
@IrishEddie317. Make sure the dryer is unplugged from the wall receptacle so you don't get shocked. Then, if you have a voltmeter, just disconnect one of the connectors that is attached to the heating coil. Set the Voltmeter to Ohms function and touch probes to each end of the heating coil. You should have continuity. If it's an OPEN circuit, the coil is the issue.
@@cclawncare1 Thank you. Yes, I do get that, but my big issue is which of the many wires go to the heating element? Are there online schematics I can read to get the right ones?
Just a heads up to anyone doing this repair. The edges of the sheet metal are extremely sharp. I sliced my thumb knuckle unplugging the connecter to the lid, and had to get stiches. The repair video is spot on and I just saved myself a ton of money by following it. Just watch out for those sharp edges. lol
I just sliced my head open. I wish I read the comments first… 😅😅😅
Read this as after I sliced my hand.
Yeah learned that the hard way
Thanks for this. I'll be sure to wear some good work gloves when I do this repair.
Thank you so much
This clip is the best one I've seen yet, he gets down to business right away. Because honestly, we don't want to know the whole life story on the dryer and who it belonged to or how many clothes it's dried over the years like you see on other videos, we want to fix the dryer and go back to enjoying our weekend watching football, playing Golf, etc.
🤣🤣 I know exactly what you are talking about.
Just did my first side job using this video lol appreciate it man !
I could not agree more. This person is perfect short and logical excellent clip
Omgosh this video saved us from buying a new dryer!! 32 year old female here and I did it by myself!!! Your directions were wonderful!! Thank you!!
Awesome, very glad it helped you.
40yr old widow here....was intimidated watching this whole thing being taken apart 👀...if you can do it! So can I! 🙏
Just fixed my own dryer using this video, so a year later you are still saving lives and tons of money! Thank you for uploading this; made it extremely easy to do myself.
lol You are very welcome. That's my plan!
Great video but FYI, you don't have to take the belt off or the drum out to replace the heating element. You can easily remove the heating coil assembly once you have removed just the top cover and the front door panel. Then you remove the screw out of the heating element housing so you can pull the housing out from the dryer and have full access to the sensors and the coil. This method saves you a lot of time and hassle.
Thank you
The housing was bolted into the stand but was able to get those out
Great pro tip. Saved me a bunch of time and headache of the drum and belt assembly. ❣️
Thank You for this tip.. Removing the belt and getting it back into place right, was the one thing I was alittle worried about.. Other than that I know I can get this done with no problem.. Thanks alot!!
@@andrecomanigault Very welcome
Youre a gods send. Im a broke 24 year old who lives alone so getting a repairman wasnt an option for me. You explained it so well and thorough. And I actually had fun fixing it (besides getting those heating element clips off you definitely made it look easy 😂). But I appreciate you so much.
My wife complained that the dryer wasn’t making any heat….so I put my handy man hat on and used your video for guidance and now the dryer is as good as new and my wife is happy. My dryer was a little different on the outskirts but pretty much the same internally. Your video was straight to the point and very informative. Cheers!!!!
Great!
Thank you so much for posting this. I'm 69 yrs old and I was able to replace the heating coil all by myself. Thank you so very much. :)
You are fantastic. I would NEVER have attempted replacing that element until I saw your video. Excellent video!!!
That's great, hope it all worked out for you.
Thanks it was helpful, but when I got stuck trying to figure out how to get the belt back on, I found out that you dont need to remove the drum or front framework at all. The Heater element will pull out to the front by removing the front bracket. we do appreciate your posts. cbe
How do you get the screws or wires off? How do you test it?
Thanks to you I repaired my dryer all by myself. This is the most useful video ever and your explanations are perfect. You are a life saver
Glad it helped
My dryer is upside-down rite now in 27 pieces because i decided to follow your instructions.. i am now waiting about 36hrs for amazon to get me the replacement heater element i need for under $26! Ty.. if i had to hire a guy, now a days, thats would be a $300+ bill! Im grateful for youtube, and im grateful to you for sharing this money saving tip!!!!
All I can say is THANK YOU! This video definitely saved me hundreds...I order my heating elements on Amazon, it was delivered the next day. The installation was exactly as described in this video. In fact, my heating element was broken in the EXACT same place. Keep in mind that some places inside the dryer are sharp on the edges. Believe it or not, the hardest part of the installation for me was disconnecting the wire that controls the dryer light (after removing the front). That clamp just would not let go, but I eventually got it. Thanks again!
This is great to hear and I know what you mean about the wiring connect.
You can get the heating element assembly without removing the drum. Remove screw from back vent, pull out back vent. That gives you access to renove the 2 back screws that hold the frame that supports heating element assembly. Then remove front as instructed, remove 2 front screws from frame that supports heating assembly. There is one screw that holds heating element assembly with support frame, once you remove it and are able to separate both, you can pull them out the front. Great video, thanks.
This is probably the best video on this i have seen. Thank you for posting. Saved me a ton of time and money.
You're welcome!
Doing the job now! Didn't have to remove the drum on my unit but it does make it a bit longer to remove the heating element housing itself without cutting your hands up. Great video and thank you for showing this.
Thanks a lot ! You saved me from being scammed . They wanted to charge me 400$ to change a piece of 50$ for an hour max of work . Thanks again.
@@RektoshiNakamoto wow! Unreal how dishonest and greedy some people can be. You're welcome 😊
I really wanted to follow the steps with my teenage sons help but my hubby loves paying for jobs to get done quickly… Took our electrician an hr max. He had the part and cost $225 plus I tipped him. I was there cleaning all the parts… Sooo much dust and lint in hidden places. Works great! Can’t believe there aren’t more house fires because of dryers!
Lets hope there isn't many if any fires. It's crazy how much lint and dust collects inside a dryer.
Another viewer that had success chaning the heater element in my dryer because of your video! Thanks!!
PS other viewers, at 5:48 of this video Samsung Dryer Belt Replacement - Not Spinning or Starting shows a really easy way to get the belt back on for the drum.
Man this video saved my butt! Thank you so much for putting the time in on this video! Great details and drawings! Thank you!
Thanks. I have a similar model to yours that just stopped working. Your video was the first I found. I order the element yesterday with a 1 day ship, total was $30. Tore the dryer apart after work and got back up and running in about 45 minutes. Works like a champ.
Excellent! 😊
Thank You! Despite replacing the belt a couple years ago this video cut my disassembly time in half and probably saved me at least an hour in trouble shooting. My problem ended up being the thermal fuse.
I just fixed my dryer today and I could not have done it without your step by step instructions. Just tested the dryer and it works great. Thank you again.
Amazing 👏
Not all heroes wear capes. Thank you so much for the video. Worked like a charm. My heating element was broke in the same exact spot.
Thanks! 😀
Great video. Thanks for sharing I just realized that I need to do more frequent maintenance on my appliances. This definitely saved me money.
Thank you for making this video! My Samsung was a different model but pretty much the same inside. It took me 4 hours but I got it done in one day. However I wouldn't have attempted this without your video. Thank you sir !
This video worked fantastic. I was putting off fixing my dryer for weeks because I thought it would be too much work but the step by step instructions in this video made it easy! I watched it through a couple times first so I knew what to expect and the repair went smooth.
Thank you for this video! I was able to repair my dryer that was working but not heating. So happy to be able to repair instead of replace!
Fixed it in about 45 minutes! Thank you sir for the detailed video.
Thank you ! Saved me hundreds of dollars , only cost 30 for the new part and about 30 minutes of my time ! Thank you!
Great! Good job buddy
CZcamsrs Helping youtubers! I'm a car guy, dryer stopped working. No heat. CZcamsd, your video popped up, watched. Loved that you recorded in socks. My man. Took mine apart, coil broken also found helacious rattling noise on startup was the heater housing rattling against the outlet. Made my day., Parts on order. Thanks!
That's awesome! CZcams is a great for solutions and learning. Thanks Lou! 😀
Thank you for making this. Weirdly enough my coil is snapped in the same place as yours was. I have never worked on a dryer before and this made it insanely easy! You saved me a small fortune by not calling a repairman.
Glad I could help!
Mine was broken in the same exact spot as well! This video was awesome - makes me feel good to be able to fix it on my own.
Kudos on this video - I just took my Samsung dryer apart and confirmed no continuity to the heating element. Waiting for the replacement but i'm nervous as hell to get that belt back on the idler pulley. Anyone have advice on how they managed to get their drum back in and the belt back around idler pulley and motor shaft? Advice on that would be appreciated greatly!
Did you have any trouble with removing the front? I have all the screws out and the top will pull apart, but the bottom is still attached and I can't tell what is holding it.
Hey Brother, I fix elevators, and always feel,I can fix anything….truth is I can, but only with guidance from guys like you, willing to take the time to show fellow techs like ourselves who have the confidence just not the know how…love it thank you!
Thanks that's great!
I watched a guy remove the heating element without taking the drum off and I’m sure it took longer too get the element out than it took you to dismantle the whole unit thank you
That makes me happy, people have been commenting I didn't have to remove the drum. At the end ofcthe day the mission is to get the dryer running before the wife loses her s#*t right lol 😆 Thanks for sharing that info!
This is AWESOME!!!! You saved me a bunch of money! I was about to go out and buy a new dryer until I saw your video..... THANKFULLY you're working on the exact same dryer I have. You save me from spending probably another $1,000 on a new dryer now I just have to buy a $25 part from Amazon
Cool thing is most brands are basically the same. Good luck!
Thank you so much for this video. $20 fix vs a new dryer! I have never attempted something like this but as a success with your video!
That's awesome to hear! I love saving people hard earned money. Your comment made my day 🙂
Your video was awesome, perfect instructions. Thank you!
You're welcome :-)
Loved your detail and use of normal lingo. Let’s hope the element is my problem after doing all this work to take apart.
You saved us hundreds! So easy to do thanks to your detailed instructions. THANK YOU! 👏🏼
You are welcome!
Instructions followed, repair made, easy peasy with such awesome guidance! Thank You for the video! Money saved, dryer back in business...just BEWARE THE SHARP METAL! Pinky knuckle stinging from them!
@UniqueModelCreations glad you repaired it yourself. Great job! Yes those sharp edges can jump out and get ya.
Big help putting the diagram of the picture of the idler pulley with the belt from the drum. That was a huge help
Worked perfect for my Samsung drier. Same problem, heating element. $28 on Amazon for a new one
I have the same set and the same problem.
Now I know what to do.
You made it easy.
Coming back to this vid again after needing it over a year ago! Great info! Can’t wait to sell this darn dryer though 😂
Thank you SO much! I was able to quickly make this repair with next day shipping for a $20 part thanks to your video. Our 3 year old and 6 month old require urgent laundry.
Great to hear!
Great video, no bsing around. Thanks
Amazing walk thru. Direct and to the point. I learned a lot and my Samsung dryer is as good as new. Got it 2 years ago for $100. Got the heating element for $25. Thank you.
You're welcome!
good dad vibes coming from this guy. I want to play catch with him. Feel like he'd have some good tips
Excellent work. Saved me so much time. Many thanks for the straightforward tutorial. So easy to follow and very informative. Well done!👍
Thank you this video was excellent. Fixed my dryer by watching your step-by-step.
Great to hear! 😀
Great video and all for just $23 parts!! Took about 3 hours or so in and out including lots of cleaning, but I figured I just paid myself v what it would cost to have the job done. Very good detail and your drawing of the belt/motor/tension spring was super helpful!
Glad it helped! Awesome job 👏
Thank you so much for your video. These machines are really so simple but the guidance keeps you from taking things apart you don't need to.. Perfect.
You are welcome!
Straight to the point and very simple !!! this video just saved me and my husband alot of money !
Good to hear
You are a ace in Showing someone how to do this.Thank you very much for your video
Glad to help
Got my Samsung dryer working again! Your video was clear ! Only thing i had trouble was fitting back the hood onto those two front clips. For whatever reason it only would clip on one side!
Great! I had the same issue buy I kept trying and I finally got it right
The video was a great help with me fixing my Samsung electric dryer.. Repair went off without a hitch.👍👍👍👍
Great job!
Fantastic. Only mention is the diagram is reverse from my perspective. Worked great!
Good job……easy to follow steps completed less than a hr
When checking components in a ckt. always remove at least one wire connection from component before doing an ohms check. Otherwise you may get a incorrect reading by reading back thru the other circuits.
Awesome video! TY! I did learn quickly, good to have some workgloves, unfinished metal edges are sharp!!
You sir have earned a comment. Very helpful video !!!
Awesome!
Great video I was able to disassemble and find out that the heating element had a break in it. I have a dryer exactly like yours. Now I just need to find the part replacement . Any recommendations?
Good to hear! I googled it. Found a parts dealer not far from me. I also found that part on Amazon, just takes a bit longer to receive.
@@GettingItDoneFixes Hey sir yes Found it on amazon for $28.50 wife going to be happy we don't have too buy a new dryer lol. Once again really appreciate the wisdom sir. God bless..
Thank you for the knowledge. Helped me get through fixing my dryer also 🍻
Great to hear!
WELL SIR … THANKS A LOT FOR A FANTASTIC TUTORIAL!!!
I have the same dryer, I was able to use your posted part number and order from Amazon.
Took my time, followed you step by step and boom, all is good now 👍👍.
Does that makes me a professional home owner now ?
Thanks again sir 😆😆😆.
Glad it helped
Alot of work. I'm going to try to shortcut it. Thank you for the video. 👍🏿
This video is perfection was a constant reference point to a successfully install/repair!! 💜💜💜
Notes for help
1 take pics or video with light that belt on the pulleys/idle wheel.
It helped a lot puttingvideo phone in there and seeing it.
2. Maybe try doing the pulley first then put the barrel in with a buddy I couldn't get it the other way but maybe your more flexible than I lol.
3. On the element unscrew the three screws on each side helped me getting it in n out and lined up.
4. The wires on element go into the side they're on so top coil to top hole etc. [Take pics!!] Lol helped so much.
5. You may not remember but that first cycle smells and that's the element lighting for the first time it usually happens on new dryers but we forget bout it lol.
6. The plugs all should just pull out I don't believe there were any of those push/press while pulling ones that SUCK lol
Lastly separate your screw sets and take pics the 3 on behind the door are different than all the other ones and yah that n pics helped.
saved me hundreds and for that I thank you. this made it so easy. Dryer works again!
Great to hear!
I was having a tough time with getting the belt on there right, I think your diagram at 3:44 is off, the arm for the idler pully on mine was the mirror image of that, and the screw that held it in was on the lower right of the motor assembly. What I did to make mine go again was to - with the front shroud for the drum off, push the idler arm far left, so the spring was tensioning almost as far as I could get it, then wind the tooth side of the belt (grooves) around the motor shaft, and then the smooth side around the idler pully. Sorry for the run-on sentence. Also, the tooth(groove) side of the belt should be inward facing on the drum. Just an excellent video thanks very much!
Just replaced the element in mine. Thnx so much.
Just fixed our own dryer
Very helpful video…thanks a lot
Good job, you're welcome 😊
We were having the same issue and this really helped us out and saved a lot of money!
This video save from by a new one I do it myself parts just cost me $35 keep the good work
My dryer kept shorting after installing my heater element. To those reading this, make sure your heating element coils aren't touching one another. It will short the dryer and cause the fuse box to jump. For the life of me, I couldn't figure out the issue was but suspected that was the issue, and it was. Dryer heats and runs like it should now.
Thank you!!!! The dryer not heating was the 300th thing to go wrong lately. But I was able to fix easily following your video! Much appreciation from a mom of 8 and grandma of 3! We do lots of laundry here!!!!
Awesome to hear!
I said if a guy can do this in his socks with a Phillips screwdriver then so can I… great to the point video! Machine apart and parts on order.. thanks
Lol you're welcome 😊
Great great great directions, from beginning to end. The drawing of the pulley system was tremendously helpful when reassembling the dryer. Thaka so much.
Glad it helped and you are very welcome 😊
That was a great video and I liked how you presented it without stress
Great presentation
Thanks for watching
Great video.. I just finished fixing my Samsung Dryer.. it works %100 now thank you so much.
You're welcome!
Thanks so much for the video. Where we order the part? My dryer not hot now
Waiting for you answer
Wow. I thought it would involve changing a fuse. This is like working on a car! But you sure made it look easy if all went well.
Super helpful video. We were able to complete the fix in less than an hr and a half. Thanks!!!
Great! You're welcome
Thanks for the information 👍 and I love your side by side videos too keep it up sir
Thanks and welcome
Outstanding video! Exactly what I needed for my repair of the same issue. Thank you
Glad it helped
Thank you for demystifying replacement of the dryer
You're welcome!
OMG !!!! THANK U I JUST FIX MY DRYER…. PAYING MY DAUGHTER COLLEGE AND 3 MORE KIDS I CAN AFFORD TO PAY TOO MUCH 🎉
Glad it helped you!
This is awesome! Mine was broke in the same place almost!! Thanks for an excellent and to the point video!!!
You're welcome!
Thank you i did this last night thanks to your video❤
Thanks God blessed you I just found the problem of my dryer 👍
I watched your video and it was spot on. I finished it in no time. Thank you ⭐⭐⭐⭐⭐
Great video! Drawing at 3:38 kept wife and I from losing our minds. We have a Whirlpool but guts are identical.
Great to hear!
This was great. Really appreciate the walk through, was exactly this
You're welcome 😊
Thank you so much. Appreciate you and hope you're well.
Thanks for the video and the Amazon link ! Everything worked 😊
Great to hear!
Thank you, another dryer fixed!
Glad to help!
I just noticed the positioning of the wires. Mine has the red on top and blue on the bottom. I ran it both ways and it worked both times. Guess it'll work in either position to make it dummy proof is my guess. Thank you for the informative video, useful knowledge to pass on to my kids.
Thanks. I have mine torn apart and I wrote down red on top and blue on bottom for the heating element. But, I watched the video again and it shows blue on top and red on bottom. Good to know it will work either way. Thanks.
Really grateful, thank you very much, I was able to do it thanks to you!!
Excellent tutorial on this. Thanks!👍
Thank-you sir 🙏
Amazing job! Thank you for your video, I has a successful repair for my dryer! One question I have on the housing that held the heating coils, there are two additional wired modules connected (you checked them for connectivity in your video) My replacement part kit came with those, but I didn't change them out because they weren't broken and I didn't know their placement orientation (top vs bottom) to reconnect the wires, I didnt want to connect them backwards, so I left the existing. How can you tell how to replace those two parts?