Setting up the Futaba GYA553 Gyro on T18SZ
Vložit
- čas přidán 4. 12. 2022
- In response to a few questions I have filmed this video showing what I currently know about the GYA553 gyro and setting it up using the T18SZ. I'm not an expert, this is the first gyro I have every used; hopefully it will help someone.
#GYA553 #Futaba #gyro
⏩ JUMP TO ⏩
🎥 00:01 - Intro
🎥 00:59 - Note on different transmitter settings
🎥 01:36 - Settings on T18SZ Transmitter vs T16IZ and T32MZ
🎥 03:20 - Basic configuration in gyro manual
🎥 04:35 - Gyro setup in the model (Skywing 38" Laser)
🎥 07:35 - Changing the basic configuration directly on the gyro
🎥 10:05 - Transmitter Function settings - VERY IMPORTANT
🎥 10:50 - Transmitter Function settings on the T18SZ (Function Menu)
🎥 13:00 - Setting the transmitter switch for the gyro (switch SD on mine)
🎥 15:40 - Looking at the advanced options (Gyro reverse, Neutral offset, Limit setting)
🎥 21:09 - Checking its all working okay!
🎥 24:10 - Clip showing heading hold working (holding knife edge with hands off)
🎥 24:25 - Finish!
🎥 25:10 - Clips of the Skywing 38" Laser taking off
🍵If you want to say thanks, please Buy Me a Coffee🍵
www.buymeacoffee.com/matttakh...
*Donations will be spent on planes, not coffee!
✅ LINKS ✅
🔸T16IZ GYA533 Manual - futabausa.com/wp-content/uplo...
🔸T32MZ GYA533 Manual - www.ripmax.com/Futaba_Upgrades...
🔸Setting up the GYA553 on T16IZ - • Setting up the Futaba ...
✅ NEW TO MY CHANNEL? ✅
Hi, I'm Matt when I’m not busy running my IT Services company I like to spend time doing my main hobby which is all things related to radio controlled aircraft. On this channel you will find videos of plane builds, flights, crashes (hopefully not many) and tutorials.
🔸Please subscribe to my channel🔸
www.youtube.com/@MattTakharRC... - Krátké a kreslené filmy
Great video Matt - really helped me to understand the whole system before I start to integrate it into a model. Well done & thanks
!
Really pleased you found it helpful. I have another one on the 16IZ which is a new transmitter. You can do all the configuration from the TX, but have to plug a lead in from TX direct to gyro. Good luck. They are great gyros.
I’ve run out of channels trying to add flaps! Very helpful video.....thanks a lot
Ah that’s a shame! What TX are you using?
Well-presented. I have a 16SZ but am not able to fly right now. However, when I get to setting up the gyro, this video will certainly help.
I also have a 16SZ. The menu system is the same. Let me know if you find otherwise or have any issues. Happy to help
Brilliant watched many times, very helpful thanks
Glad it helped!
Thank you, great information
Pleased you found it useful. Thanks for the feedback.
Thank's Mat,awesome video im just moving to planes from helis im old and want a small plane to do the 3d with,and you answered one of my questions being able to do Knife Edge virtually hands off,there may be more questions as I progress,and may I wish you and your family a Happy and Prosperous New Year
Hi Martin. Glad the video helped. It feels pretty strange taking your hands off the sticks while doing knife edge, but also pretty cool seeing the gyro work. There is a Shorts video showing it. I’ll try and capture some more soon.
Let me know when you have more questions. Will do my best to answer.
Happy New Year to you and yours.
awesome vid thanks so much big help ,,,
No problem. I might do one covering the T16IZ soon. It would be good to show all the configuration via the transmitter.
I've now recorded the setup on a T16IZ - czcams.com/video/xYWUSfxanzA/video.html
-----------
Hi, I’m adding this comment to the top as it may help others.
If you are using the T16IZ or the 32MZ then you can configure all of the gyro settings from the TX. However you have to connect the TX to the gyro via a lead to access some of them. It’s not done wirelessly
So it looks like you can’t go into the ‘Basic Menu’ on the GYA553 screen which is accessed via Aeroplane > Gyro Setting > Start > Basic Menu
The wire goes from the back of the TX to the P.Box port on the gyro. Note it goes to P.Box and not the SBUS2 connection.
The lead has to be disconnected with the Gyro and TX both turned off!
If you are using the lead it should show the Config page now. With out the lead it won’t, it will appear locked out.
Matt Again, I want to thank you for your videos. They been very helpful. I want to ask you this question have you use the Gyro yet? And if you have how well does it work on the plane?
Hi. You’re welcome, thanks for the feedback. Yes, I have two of these gyros know. One in the small Skywing laser, which I’ve used a lot. I’ve also just put one in my Extreme Flight Laser, but not flown it yet. However I did put one in my friends 85” Extreme Flight Extra and it works very well, it really has changed the plane. Is rolls much nice.
Omg this helps soo much! Looks like i am having the same issues you did before with the function setup. I had no clue about this! I believe since i didnt do this its the main reason why i dont have access in my 16iz main menu for Gyro settings. Meaning when i click on gryo setting the next page is unhighlighted for change.
Currently, you can view the setting but the software won't let you make any changes. So its like your locked 🔒 out untill you configure correctly. I will check this tonight when i get home and confirm this.. once again thank you so much for the time and energy spent to make this video. Now for the questions.
1. Before i installed my gyro i set end points on my 16IZ now that i connected all the wires from the reciever to the gyro seems like my end points are messed up. Also my dual rate switch is outta wack and doesnt function probably. Im sure theres a question in this statement lol.... any idea whats going on there.
2. In the gyro settings. AVCS AND NORMAL. One you said was stable flight and the other you said it was for i assume windiee conditions. But which one is heading hold. Maybe i need to re watch more carefully.
3. Should i not worry about the conditions and just group everything rather then put single. The concept is still new to me and trying to grasp it. From global to single condition as well as it have a seperate menu for lol. Think theres a question there as well haha.
Hey, I’ll do my best to respond, hopefully we can work this out together.
Firstly, you have the Futaba 16iz, so I’m presuming you can do all gyro configuration via the TX, which saves loads of time and messing about with the two tiny buttons on the gyro. I’ve just downloaded the TX manual, for others its here: futabausa.com/wp-content/uploads/2021/02/16iZ_ENG_Full_Letter.pdf
I’m presuming you have tapped the INH to enable the Rate, in the Gyro screen? As this might be why it appears as locked.
In response to your questions:
1. I’m not sure why your endpoints would be different, is this a case of needing to use the Neutral Offset now you are running via the gyro?. However I think the gyro will override the using the Limit Setting. I think this means if the Limit settings is more on the gyro then the gyro will travel to that limit rather than your dual rate. I might be wrong here but worth checking.
2. I have Rate 1 set to 0 (zero) which is basically Gyro Off because I wanted to be able to take off with it effectively off, then switch in the other two modes. Rate 2 is therefore “normal” gyro mode, it will correct in windy conditions. Rate 3 is the only mode that I’m using AVCS. That’s the rate I am using when I put the plane into knife edge and take my hands off the transmitter. It holds the heading and keeps the rudder applied. Pretty cool!
3. I am using conditions for different flight modes, on this model its F3A, 3D and 3D Max are the conditions I have programmed. Which basically just change the amount of movement each control surface has and expo. These are all set to Single. The gyro, on each rate is set to Group, as shown in the video.
Does that help?
I've spent a day trying to set this up (16SZ) and I'm having absolutely no luck, despite Matt's great guidance. Can't even get the gyro to reset.
I'm sorry to hear that. Does this video help? czcams.com/video/xYWUSfxanzA/video.html
@@MattTakharRC Hi Matt - nothing wrong with your video. Trying to set the neutral offset for the elevator and I get one movement but can't determine of pressing the Mode and/or Data switches incrementally changes the neutral progressively or in one movement determines where it is and then I have to mechanically adjust the rod to align the elevator. I get one movement...
@@Bus429 ah I see. It is tricky to do that via the buttons. I’ve not had to try yet. The 16IZ does make it much easier as you can see it all on the TX screen.
@@MattTakharRC Ah, just watching your video again and I may have made a cunning error, to paraphrase Baldrick. I'll get back to you!
Great video on the gyro setup. I have a question. Have you had any issues with signal loss and/or range check problems with the Futaba transmitter? Futaba has always been known for very high quality.
Hi, sorry I lost your comment and have only just found it. Never had an issue with signal strength on Futaba TX/RX. A friend once did, however we put that down to the RX wires being too close to the carbon inside the fuselage.
@@MattTakharRC Thanks for the reply. I appreciate the feed back regarding the Futaba Transmitter. I always had great luck with Futaba.
Hey Matt, any guidance if I am using Futaba T10J transmitter and trying to setup Futaba GYA460 gyro? Don't see a lot of help online.
Hi. Unfortunately not. I don’t have any experience with that particular gyro. It looks good though!
Hello, I am new with this gyro. I don't understand the feature " power holding...C1, C2, C3, C4 or C5..." compare to AVCS gain. If you can explain me. Thx.
Hi. I’ve not actually got round to playing with that yet. I’ve now got the gyro installed in my Laser. Once I’ve done the test flight ill try and work out those settings.
Found another question on mapping(function). So the back of the instructions shows the channel mapping for the gryo but does it have to be those channels can I use lets say channels 6-10 for example to map to the switch since everything works under the sbus port.
I ask cause i have my lights already mapped out on channel 5 and in your video it shows channel 5 is the first gyro function.
Hi, good question.
In my experience I think it has to be those channel numbers. I originally had my Aileron 2 mapped to a different channel and had to change it to match CH6. Before I swapped it to CH6 only one aileron would work when the gyro was on, which was Aileron 1 as it was already mapped and connected to CH1
Hope that makes sense!
Thanks, that's great to know.
I have a Futaba 18Mz and used the GBP-1 for programming the giro.
I hope you can help me with the Gain as you mentioned if there’s bounce back there’s how would I turn down the bounce back
How do you mean with Bounce back? Something I noticed recently is the Gyro overrides the limits on the control surfaces. You have to be careful with this.
@@MattTakharRC I figured it out the gain was the reason it would do that, there’s just not enough of instructions to help understand the device and it’s capabilities thanks for your response.
Do you have to use Futaba servos?
No you don't. I normally use Savoy in most of my models. The larger ones have either JR or Futaba. The only requirement is to connect the gyro via SBUS. So RX has to be SBUS
Well followed everything to a t. Still dont have access to the settings menu
Ah man that sucks. Can you take a couple of photos of the menu issue on your TX and email them to me? Matt.takhar@gmail.com
Can you also confirm if you have followed this guide on the T16IZ to read and write the data to your gyro? futabausa.com/wp-content/uploads/2021/03/T16IZ_GYA553_SettingManualE_letter.pdf
@Matt Takhar RC reviewed but didnt see that on the page... in the manuel.. i been using this manuel instead for the gyro itself
futabausa.com/wp-content/uploads/2021/03/T16IZ_GYA553_SettingManualE_letter.pdf
Hi I have the 16Izs And when I go onto the Gyro settings, it won’t let me reverse the elevator. No, the elarans
Do you have any photos of the screens when you get this issue? Email to Matt.takhar AT gmail DOT com
Matt have these gyros beennused in a turbine jet?
Hi. I’ve not tried them but I’m sure others have. There is no reason why they shouldn’t work well.