WELCOME BACK TO THE CHANNEL GUYS! This is the first of many videos for my Civic of 2023. If you'll notice, I now have my 'Super Thanks' set up, so if you guys would like to help support the channel even more than watching and liking, you can help keep the lights on in my garage. I can't wait to bring more content to you guys for this year! I'll see you guys soon with my new Brembo brakes! Stay tuned 🖤🤍❤
I hope you got this thing tearing the up the streets now that the warm season is coming. Love the series about the 9th gen, you’ve been my go-to for everything I’ve done to mine so far
I randomly remembered Milan and looked up his channel. Sad to see this last video was almost a year and a half ago. I remember watching him years ago when I was really looking into an Accord Coupe like his. Hope homie's okay.
Great video, I'm going to have to go and view all your other ones. Hopefully your still active as this was one of the best car related videos I think I have ever seen, concise, accurate and considerate to those who might not have all the tools 10/10.
Awesome video! The one thing I would do, is to add some sort of grease/lubricant to the axle spline (Honda service manual calls for high temp urea grease, I personally just use antiseize). Recently while doing a ball joint replacement, I’ve had an axle so rusted on the hub both I and a shop (with a press) could not get it out. Ended up just picking up a axle and a knuckle/hub assembly at a junk yard. Such a pain!
That's a good call 👍 Yeah buddy I believe it!!! Mine did have some on there before so it wasn't a concern, but the more grease / lubricant to prevent stuff from seizing, the better
…..hey Milan did you stop making videos? I really miss your content. But with that being said I hope you and your family are doing well. Stay safe and Happy New Year. 😏
@@milanmastraccihey there buddy... I know I'm not the only one wondering if everything is ok? Please just take a second and let your subscribers know your ok. Ty in advance...🙏🙏🙏
Well done Milan enjoyed it and all the information you provided. How about a video on shop update and what you had to do to install the vehicle lift and maybe footage if you have it on footings etc.
Dude whatever happened to your 300hp N/A K24 swap? Been watching your videos and after you switched to the Civic, you haven't brought it up again. Can we get an update?
Today i was searching for two cars i like. One is the toyoya gt86 /subaru brz and the other is the 350z. I forgot about you but today i rememberred your videos and so i searched your channel to make sure i was subscribed. I wonder what has happened to you :( Hope you well!!
They are not, and they are actually a better fit for your 8th Gen coupe! They're from an Acura, but not from an RL. I'll be posting a video about these very soon as they're going on my Civic. The install will be the same with your Honda. Hope this helps!
Most likely its not philips screws they are probably JIS japanese industrial standard looks like philips but different buy yourself some vessel screwdrivers and perticularly the vessel megadora impacta its a screwdriver that you hit with a hammer its amazing for dust shield screws and rotor retaining screws
There is a easy way to get the c clip lose Just get a screwdriver or a centerpunch and go inside of one of the two taps(the taps do grab with the pliers) and give it a some taps in the direction you would squeeze it together with the pliers, now do the other one and the c clip should be free
I bet you I could do that now with the circlips replaced, but mine were pretty rusted on there. I'm very envious of guys in southern parts of the US that don't have to deal with corrosion like I do! In an ideal world, yes I would be able to do that, however that's not the case lol
@@milanmastracci He's right, that's the easiest way. The point of tapping the clip is to break it free from the rust. I guarantee that would have worked.
Is this guy done making videos? It was me favorite content on CZcams. Hope all is well
Yeah what's going on? I hope he is okay
The legend says that, his girlfriend dump him, now he does drugs and sells honda parts to keep up 😊
When you going to start uploading again ?
Hes a busy man
.give.em a brake
@@whatsgrowingon you know what’s going on maybe?😢
Every now and then I come back to see if there's any new videos. Hope you're well brother.
Me too. I think tour Friends is Gone😢
WELCOME BACK TO THE CHANNEL GUYS! This is the first of many videos for my Civic of 2023. If you'll notice, I now have my 'Super Thanks' set up, so if you guys would like to help support the channel even more than watching and liking, you can help keep the lights on in my garage. I can't wait to bring more content to you guys for this year! I'll see you guys soon with my new Brembo brakes! Stay tuned 🖤🤍❤
But been here since the mini, 350z series
Heck yeah brother!! Welcome back ❤️
Milan, where are you my friend?! We all miss you!!!!
Hope you're doing well man. I just got a 9th gen and love the build and your video quality. Hope to see more!
One of the best mechanic teachers out there. Hope he comes back. He makes learning very easy
Idk how this doesn't have more likes. I'm still waiting in the next video for the civic si keep up the good work. I love these!
I hope you got this thing tearing the up the streets now that the warm season is coming. Love the series about the 9th gen, you’ve been my go-to for everything I’ve done to mine so far
I randomly remembered Milan and looked up his channel. Sad to see this last video was almost a year and a half ago. I remember watching him years ago when I was really looking into an Accord Coupe like his. Hope homie's okay.
Great video, I'm going to have to go and view all your other ones. Hopefully your still active as this was one of the best car related videos I think I have ever seen, concise, accurate and considerate to those who might not have all the tools 10/10.
Where are you bro? It's more then 4 month ago. Is everything OK? Just asking, don't want something bad happend..
WE NEED YOU BROTHA! COME BACK🤧
Hello Milan, missing your content please dont take too long😂
Awesome video! The one thing I would do, is to add some sort of grease/lubricant to the axle spline (Honda service manual calls for high temp urea grease, I personally just use antiseize).
Recently while doing a ball joint replacement, I’ve had an axle so rusted on the hub both I and a shop (with a press) could not get it out. Ended up just picking up a axle and a knuckle/hub assembly at a junk yard.
Such a pain!
That's a good call 👍
Yeah buddy I believe it!!! Mine did have some on there before so it wasn't a concern, but the more grease / lubricant to prevent stuff from seizing, the better
…..hey Milan did you stop making videos? I really miss your content. But with that being said I hope you and your family are doing well. Stay safe and Happy New Year. 😏
Nice video bro, the production quality has improved so much since the days when you were making videos on the MK4 Golf 👌🏽
Appreciate it Mr Singh! I think I've learned a thing or two since then 😜
miss your content bro! hope you return strong
This must feel nice to drive, almost fully refreshed, drives better than new. I’m slowly getting fb6 refined
I'm looking forward to that! I'm yet to drive it with all of these suspension and front end upgrades
bearing in the the freezer over night as well, cheers for the vid.
Happy to see. I'm looking into getting spacers when I roll the fenders on my car, and swapping to bigger studs might be the go to
It is the proper way to do it, so I approve
@@milanmastracci it's good information to know up front. So I definitely appreciate it
Love your videos milan! Please keep making stuff, your content is insanely good!
More to come! Thanks for coming back 💪
@@milanmastracci hope you are alright ma man - been waiting for What feels like a decade. any chance you going to post again?❤
@@milanmastraccihey there buddy... I know I'm not the only one wondering if everything is ok? Please just take a second and let your subscribers know your ok. Ty in advance...🙏🙏🙏
miss your vids
Well done Milan enjoyed it and all the information you provided. How about a video on shop update and what you had to do to install the vehicle lift and maybe footage if you have it on footings etc.
Dude whatever happened to your 300hp N/A K24 swap? Been watching your videos and after you switched to the Civic, you haven't brought it up again. Can we get an update?
Hey man hope everything is well hope we hear from you soon!
Hey Mil, we are missing your video.
Today i was searching for two cars i like. One is the toyoya gt86 /subaru brz and the other is the 350z. I forgot about you but today i rememberred your videos and so i searched your channel to make sure i was subscribed. I wonder what has happened to you :( Hope you well!!
Is he still alive? Or is he making anymore videos?
Yes, and he will be!
@@milanmastracci wow! Glad to hear from you ! 👍🏻😎
@@milanmastracciLet’s go man, we need you ✌️🔥
Wounder if he ever coming back.
Thank you
Another great video! Keep them coming.
More to come! Thank you 🙌
Waiting for more content 😌
couldnt click fast enough..love the content bro keep going and happy new year from the states
Thanks! Will do! Happy new years to you too brother
Happy new year milan. First of all i hope we see a video for the big brake kit. Second of all WHERE IS THE MINI???
Nice video 💪💪
will you come back with video of the mini??
🐞NEVER FORGET!🐞
Is this guy ok? What happened to him??
What ever happened to the mini?
Are we ever going to see the k24z3 with the k24a2 head?
Hey Milan how and where did you learn how do do all of these things
Hey Dayne, from taking stuff apart and doing as much research as possible 👍
Hey champ. Great video as usual.
Bro where u at
Anyone knows what happened to him? He just stopped and vanish
wheres the new video :(
Great content 👌
Glad you think so buddy! 👊
great video
Glad you enjoyed it
Are those calipers from the Acura RL? I really want to get some for my Gen 8 Accord Coupe! Great and informative video, thanks!
They are not, and they are actually a better fit for your 8th Gen coupe! They're from an Acura, but not from an RL. I'll be posting a video about these very soon as they're going on my Civic. The install will be the same with your Honda. Hope this helps!
@milanmastracci I'm sure it will help, thanks for the info. Can't wait until the next video. Be safe out there!
Does anyone know the link he used to find the spindle tht will work with the extended arp stubs?
Quality!
Thanks buddy!! 👊
where have you gone, G
What up bro! You still out there??
hope everything's good dude. cheers from Hamilton
❤❤ the best
Has anyone tried connecting him on Instagram or facebook. I hope he is alright.
👍
Come back please 😢
This is alot of work and steps 😅 it also requres alot of handling tools or specialty
You are correct, however this is the proper way to do it
@@milanmastracci I understand now why mechanics arent cheap but can cheap out on certain steps to profit
still waiting for next video...?
What’s going on, you haven’t posted any videos, where is your new Z?
You better not use a spacer for the brembo brakes
Andy, you planning on buying me these? 😜
racingbrake.com/2260/
Most likely its not philips screws they are probably JIS japanese industrial standard looks like philips but different buy yourself some vessel screwdrivers and perticularly the vessel megadora impacta its a screwdriver that you hit with a hammer its amazing for dust shield screws and rotor retaining screws
Note to self! Thanks Fred
There is a easy way to get the c clip lose
Just get a screwdriver or a centerpunch and go inside of one of the two taps(the taps do grab with the pliers) and give it a some taps in the direction you would squeeze it together with the pliers, now do the other one and the c clip should be free
I bet you I could do that now with the circlips replaced, but mine were pretty rusted on there. I'm very envious of guys in southern parts of the US that don't have to deal with corrosion like I do! In an ideal world, yes I would be able to do that, however that's not the case lol
@@milanmastracci He's right, that's the easiest way. The point of tapping the clip is to break it free from the rust. I guarantee that would have worked.
miss the Z videos man
First hehe
My man!! 👊
Just here on Checking.... Is the Person Still Active?? I mean i was Worry...
Bro I’m tired of waiting where are the videos
Hey what happened with you
POST A NEW VIDEO. DAMN
RIP
MIA
u alive ?
He died in a car accident.
How do you know this? Are you sure? I following him since the beginning, i’m really sorry if this is true
Wtf? Is this true? 😢
Idk. I haven't found any proof of it.
Give us some updates that you are alive 😅😅 @milanmastracci
🧤🏪🧤🏪🧤🏪🧤🧤❤️🔥🧤🧤🏁🧤🏁💯🪀💯🪀💯🪀💯♥️♥️♥️💪💪🦺🦺🦺
👍
👊