Cardo PACKTALK/BOLD - Erase Pairings (Intercom and/or Device Pairings)
Vložit
- čas přidán 2. 03. 2019
- How to clear-out your intercom pairings without affecting anything else. AND, how to clear-out your bluetooth devices pairings (i.e. phone, GPS, mp3 player, bike's on-board bluetooth system, etc.) without affecting anything else.
- Auta a dopravní prostředky
thanks!!!!!!!!!!!
Your tutorials are excellent!
I have trouble using the loudspeakers that come with packtalk. I have been using earbuds instead. I have been trying to pair Bluetooth earbuds with my packtalk bold. Specifically QCY ones without success.
You seem like the guy that could pull this off?.......
@Alan Stewart thanks for the comment! Okay so Bluetooth earbuds; the Packtalk Bold itself won't pair OUT to Bluetooth earbuds for audio (none of them do that I'm aware of), BUT, you do have the 3.5mm output jack that the speakers plug into. I haven't tried this, but perhaps using a Bluetooth transmitter from the Packtalk's 3.5mm output and pairing the transmitter to your Bluetooth earbuds would get the job done? It's the only thing I could think of, hope it helps and let me know how it goes if you try it!
If I’m adding a new gps to replace an older gps that I have paired, do I need to erase all currently paired Bluetooth items first?
Good question but no need- once you pair with the new gps (congrats!) it basically overrides the pairing to your old gps.
What is the proper way to pair the SENA SR10 without it blocking out the cell phone? Or can it be done?
Just looked it up and it's going to take/block one of your phone channels for sure. What I would do is pair my actual phone to "Mobile Phone 1" and the SR10 to "Mobile Phone 2" pairing... should do the trick!
@@MotoGeekFreak thank you for your help. I will try it.
How can I delete just a bluetooth rider ?
You can reset the Bluetooth Intercom pairings (vid on that: czcams.com/video/8Y29r1QFJ6U/video.html ) manually like the video in the link shows, or you can do it from the Cardo Connect app (when in Bluetooth Intercom Mode, select Intercom in the app, and tap the three little circles in the top right corner, that'll give you the option to Reset Intercom Pairings). I don't think there's a way to delete just one Bluetooth rider; its both A and B channels together or nothing at all as far as I can tell. Of course, say you have a rider paired on Channel A, and you go to pair with a different rider on that same channel, THAT will erase the old pairing and put the new guy in there. Side note: try to use DMC Intercom Mode as much as possible, and Bluetooth Intercom Mode when you have no other choice. Anyways, I hope that helps!
I tried deleting a paired bluetooth rider manually but it deletes my phone instead, then the app doesn't show a delete option like this video did, so I just did a factory reset and started again. But still love the videos.