Making A Knife - Stonewash
Vložit
- čas přidán 18. 11. 2022
- Build a knife yourself, was on my to-do list for a long time. Now it was finally time, the last "push" was that again "7 vs. Wild" in CZcams Germany comes. The format has already captivated me last year, so I decided to make a survival knife with Stonewash. For this project I had to cut knife steel, work with the belt grinder, drill, saw, file, harden with the hardening furnace, work on the lathe, sharpen the edge and much more.
This video is not only to quickly show someone how something works, but also to relax and get away from it all! Relax while watching the video and enjoy what you see and hear. I recommend you put on headphones and listen carefully at certain points (I've highlighted them), as there are often very strange sounds there.... Enjoy!
------------------------------------------------------------
▶ What did I do ?! ◀
With the angle grinder, I roughly cut out the shape from a knife steel (1.4112 - 440 B/stainless). With the belt grinder I then ground it exactly to the desired contour. After drilling the holes for the pins, I used a file to file the thumb ramp onto the back of the knife. Using a belt sander, I ground the cutting edges to the blade, but first left 0.5mm so that the blade would not curl during hardening. After hardening in the hardening oven at 1040°C, I tempered the blade three times at 200°C and 60 minutes in the oven. The blade now has a hardness of 58 HRC. I glued black G10 liners to the walnut handle, cut out the outline on the bandsaw, and gave the handle its final shape with the file. Now all I had to do was taper the edge, turn the brass pins on the lathe, and glue the two handle halves to the blade. After filing down the pins and fitting them into the handle, I sharpened the edge with an MDF washer and polishing compound. Finally, I treated the walnut handle with linseed oil varnish.
------------------------------------------------------------
▶ Good to know ◀
I used the following tools: Pencil, angle grinder, spray adhesive, clear coat, pliers, belt sander, center punch, hammer, putty knife, cordless screwdriver, drill, countersink, files, key files, calipers, marking pen, grinder, Allen wrench, screw clamps, sandpaper, curing oven, oil, forging tongs, oven, barbecue thermometer, immersion heater, HRC files, band saw, 2 component glue, sandpaper file, iron (III) chloride, KG pipes, marble chippings, lathe, cotton swabs, isopropanol, polishing stand, MDF disc, polishing paste, laser, linseed oil varnish
------------------------------------------------------------
▶ Special thanks to my channel members! ◀
-
------------------------------------------------------------
▶ Do you want to support me? ◀
Do you want to become a channel member? Then you can do it here:
/ @forgottenshinerestora...
You like what you saw and you want to help the channel to develop? If you want to support me, you can donate via Paypal:
www.paypal.com/donate?hosted_...
------------------------------------------------------------
▶ Did you like it? ◀
Did you like the video?
Then like, subscribe and share it, please!
Thanks a lot! - Věda a technologie
Not only the amazing work but your thoughtfulness for us listeners. The way you turned down the volume of the angle grinder you really make your videos not just a visual experience but the way you reach our other senses is great. Love it!
Thank you very much for your great Feedback! 🐢
Well done! What a beautiful piece of useable art! If you were at all curious if we would watch new things being crafted by you, then the answer is a resounding "YES!" Thank you for sharing this with us.
Thank you a lot for your feedback! 😁🐢
Excellent work!!! None better on CZcams. You are the King of restoration and creating!!!
Michael Herrell
Thank you very much! 🐢
Your videos are so relaxing to watch, I fall asleep every time. So it takes a few times to watch them.
no problem 🤣🐢🤩
I have an exam tomorrow but I am here to see the work of art. o7
oh... 😱 good luck tomorrow! 🐢
I absolutely love your videos so much! I've been watching for a little bit now and every video is always so entertaining to me, as well as adding some jokes that are enjoyable, and taking the time to edit things in for the listeners, I appreciate your channel so much (and this may not sound like a compliment but these videos always get me to go to sleep at night when I cant/ don't feel tired which I thank you for!) keep doing what you're doing
Thank you for your wonderful comment. for me it's not a problem that you take the videos to fall asleep, you're not the only person here at all...🐢
Best ASMR restoration channel period!
Thank you! 🐢
Eine sehr feine, coole Arbeit. Mach weiter so. Ich liebe deinen Kanal. 🐢
Vielen Dank für das tolle Lob! 🐢
0:26, Thanks, You are the best. My ears are safe. 😁
🤗🤗🐢
Your the best I wish I had the tools to do so with old rusty stuff
Can’t wait to see the FSR-2
If it wouldn't cost 500 dollars I would love to have that knife. Beautiful.
Unfortunately I do not sell it 🤗🐢
I absolutely love your channel, can't wait to see your next project
Thanks a lot! 🐢
Thank you so much for making the high pitched loud sounds, like the saw, quieter in editing
🥰👍🐢
Food job on the knife making. It's nice looking for a first made as far as I've known but good job anyway.
Perfeito. Obrigado pelos adesivos 👏👏👏👏🇧🇷🇧🇷🇧🇷
Não há problema, gostei muito 🤣🐢
Wow u know how to speak that sorry I'm new to the channel and turtle is very 🤣
Sehr schönes Messer, wie immer erstklassige Arbeit ! Aber auch sehr aufwändig. Vielen Dank !
Danke für das Lob! 🐢
I think the first version is success.
Thank you very much! 🤩🐢
AAAAH FINALLY 💜🔥
You should make a lot more of these knife making videos ! Great content!!
Thank you very much for your great Feedback! 🐢
Beautiful knife beautifully made good job well done
Thank you! 🐢
A masterpiece!
Thank you very much! 🐢
Irre. Wirklich Dein 1. Messer?
Herzlichen Glückwunsch. Tolle Arbeit.
LG aus Aix la Chapelle
Vielen Dank! 🤩🐢
@@ForgottenShineRestoration Was Recht ist, muss Recht bleiben😊
I watch your videos with the sound turned off. Good stuff!
Really good! Turtle always checking 👍
🤩🤩🐢
Beautiful
Thank you! 🐢
what a great beauty came out!
Thanks a lot! 🐢
Resulta hipnótico y maravilloso. ¡Qué excelencia de trabajo!
¡Muchas gracias! 🐢
Nice knife, and Good evening Mr. Turtle!
Thank you so much, have a great afternoon too! 🐢
Very nice job. Looks great.
Thank you very much! 🐢
Die erste Version scheint mir schon sehr gelungen...wer weiß, wie die nächsten aussehen werden...einfach fabelhafte Arbeit! 😉👍🐢
Danke für das Lob! 🐢
Great work!
Greeting from Spain.
Thank you! Greetings from Germany 🐢
Nicely done.
Thank you! 🐢
I'm new to your videos (thank you btw these are amazing) and had no idea why that marker was showing up. Cool, cool, cool!
Thank you very much! 🐢
Um verdadeiro trabalho de arte 😎🔪
Muito obrigado! 🐢
amazing video
Thank you very much! 🐢
I love how it's better than a sisorrs
Really cool!🐢
Thank you! 🤩👍🐢
What kind of steel did you use? Also, a time saving tip: use different grit belts on the belt grinder to clean up and refine the blade and handle instead of hand sanding or filing. Hand sand with higher grit to finish the material. Saves tons of time.
The steel has the designation: 1.4112 - 440 B/stainless
Thanks for the tip!🐢
Wow! Even though you're not a Pro Bladesmith, this turned out AWESOME!!!!! Well done!!! I wish I had the Tools / Equipment to do that!
Thank you very much for great Feedback! 🤩 🐢
Why did you blur the thumbnail? I scrolled past this fast for the past three days thinking youtube put smutt up here.
This video is very informative thank you sir can you show how you made your stone washing jig?
Thank you very much! In the next few weeks come several shorts where I show that again briefly... at least a part of it. In and of itself, this is only a KG tube, 2 covers, 2 ball bearings and 2 screws that serve as bolts to hold the device.🐢
Prisoner: I will catch you someday forshine
😱😱😲🐢
Nice project. Question - what grit sand paper did you use on the belt sander? Were there several grits used for the different steps? 🍻
Yes, I have used different grits. This is easy on the sanding belt and on the wallet 😅🐢
What do you spray the paper with after you stick it down?
Clear coat. I used it to protect the paper from the water (from cooling) so it wouldn't fall off.🐢
@@ForgottenShineRestoration oh cool! Thanks for the reply.
Превосходно! Но где отверстие под темляк?
Спасибо! Так как это мой первый нож, я хотел пока сохранить его простым, я изначально планировал использовать его, но оставил его без внимания для первой попытки. 🐢
wow
🤩👍🐢
Wow amzing
Thank you! 🐢
Please, stop with the turtle.... XD
🤩🤩🐢🐢
hi :D
Hey! 🐢
이 채널은 한국인이 만든 채널인가요?
아니, 어째서? 🐢
자동으로 한국어로 번역이 돼서 오해했어요.
나는 가능한 한 많은 사람들이 내가하는 일을 이해할 수 있도록 항상 다른 언어로 번역합니다.
Wheres the restoration??? 🤦🏻♂️
What about tampering?..
Нож для выживания с деревянной ручкой ? Сгораемая , гниющая , колкая деревяха в ответственном местеи? .... самнительный нож
Вопрос в том - а где нож для выживания? Нож хорош, но точно не для выживания.