Mini Vise Restoration [Bonus To My Huge Vise]
Vložit
- čas přidán 12. 06. 2024
- A mini vise restoration is the subject of this video. I saw this little vise on Ebay classifieds and had to have it right away. He's practically the baby of my other vise. Restoring this mini vise was a lot of fun and should only have been just - for - fun.
▬ What is being done?! ▬▬▬▬▬▬▬▬▬▬▬▬
At the beginning of every restoration, including that of the small visr, there is dismantling. Then I clean the components with soap and water. I remove the old paint with paint stripper, then I put all parts in a bath of rust remover. With a file and other utensils I work on the mini vise, all unevenness is removed and the vise jaws are reshaped. I clean the surface again with acetone so that it is free of grease and oil. Before I apply the primer, I mask off all areas that should not be painted. Now I apply all layers of paint. All parts that move mechanically are provided with grease or oil. Now all that's left to do is assemble, the most beautiful part of the mini vise restoration. Now the little one shines in new splendor and can return to his other vise mom. :)
▬ Good to know ▬▬▬▬▬▬▬▬▬▬▬▬
I bought this small mini vise on eBay-classifieds (10 €) and just had to have it, it should be the opposite of my other vise, because it is huge and extremely heavy at over 104 lbs (47kg)! I made this small, in the truest sense of the word, restoration out of just-for-fun. I had a lot of fun doing it, as always.
The dimensions:
0.5 lbs (249g) in weight
3.3 inch (85mm) long
1.9 inch (48mm) wide
1.7 inch (45mm) high
I used the following tools: cordless screwdriver, wire brush, toothbrush (for washing), tape, foil to cover, knife, rust remover, file, various sanding attachments, sandpaper, primer, top coat, spray paint
It took me about 8 hours to restore, without the paint drying time.
▬ Chapter ▬▬▬▬▬▬▬▬▬▬▬▬
0:00 look at the smallest vise
0:41 Disassembly
1:23 Wash components
2:27 Stripping paint + wash again
3:11 Remove rust
4:12 Adjust vise jaws and clean parts
5:11 Preparing for primer
5:58 Priming
6:28 Apply top coat
8:01 Prepare components for assembly
9:31 Reassemble the mini vise
10:20 Function test and look
11:01 The baby can go back to Mommy
▬ Do you like it?! ▬▬▬▬▬▬▬▬▬▬▬▬
Do you like the video? Then please like it, subscribe and share it!
Thank you so much! - Věda a technologie
![Huge Vise Restoration ["FIX" Huge Rusty Vise]](http://i.ytimg.com/vi/slaTB5lEYsM/mqdefault.jpg)
![Water Pump Pliers Restoration [Laser Engraving And Red Rubber Handles]](http://i.ytimg.com/vi/NvPZSkrrTgo/mqdefault.jpg)
Ah, so awesome! And thank you for painting them to the same color. Looks just amazing
Thank you very much! 🐢
Look how tiny! I’m so glad you did the same green! Great job!
I think the tiny one is really funny, and yes he should look like mama :)
LOL
Oh my goodness. I am a sucker for tiny things! I bought a package of tiny cloths pins just because they were tiny lol 😂! I love the baby vise. Thanks for that. Awesome! 😍
Thanks very much! We also have very small brackets here, on which we hang our photos 🐢 🤣🤣
Wow! That's one dinky little vise. Sort'ov a vislet. Great vid, Ty.
Thank you! 🐢
This is by far, the smallest and cutest vice i've ever seen. EXCELLENT Bro!
Thank you very much!
When I see this video, I really want to buy a vise
That can't be a mistake, you need it again and again
The slide surfaces were painted originally, and you left them unpainted after the restoration, plus removed some material in the rust remover and subsequent grinding.
This resulted in so much play (wobble) that the vice can barely be used for anything :) I know it's mostly a decorative piece, but it should be working sensibly...
In case of normal-sized equipment the glide surfaces are always unpainted and precision ground to ensure smooth operation, but in case of this little baby it was different.
It’s adorable!
Absolutely phenomenal
video , it's so wonderful to watch you restore this little vise ! I am so impressed with your videos the scope of your knowledge is astounding, please keep your videos coming
All are fascinating!!
Thank you very much! 🐢
Nice little vise. I do wonder why you didn’t paint the bottom of the tool. You primed it but didn’t give it a coat of green.
Great job love the colour looks and works fine thanks for sharing and stay safe and make. 🍺🍺👍👍😷
Thanks!
Omg they mattccch yesssss
That’s neat. Nicely done! 😃👌🏼
Thanks!
Kawaii! 😍 Something I never knew existed, but now I do I can't live without one! And that green is splendid, nice job!
Thank you! 😁👍🐢
Yeah baby vises are cute and all but they grow out of jaws crazy fast. And wake up squeaking in the middle of the night.
So those were the noises at night, I was wondering where that came from ...
Thank you! Oh, I love the video. Where did you GET that Mini vise!! SO cute!
Many Thanks! I just found it by accident and had to have this little baby. When I unpacked it from the package it was even smaller than I thought :)
Looks perfect !
Thank you!
Great job .Best wishes
Thank you!
Awesome your restored sir 👍👍
Thank you very much!
vise Mini beautiful
Thanks!
OH MY GOD where can I get an adorable tiny vice like this i need it im my life
🤣🤣👍🐢
Sweet 👍🏻 👍🏻
🤣
welll done!
Thanks!
Cute baby vise you are dad
🥰🥰🥰
no świetne imadełko (-:
😊🐢
@@ForgottenShineRestoration jesteś z Polski może ?
Nie, pochodzę z Niemiec.
@@ForgottenShineRestoration ok dzięki bo bo opis i tytuł po polsku napisany to myślałem że Polak pozdrawiam
It's so tiny!!
I wonder, why not use baking soda with boiling water first to loosen up the filth and then clean with dishwashing soap.
Nice job either way, subbed and binge watching your channel.
Hey Petar! Thank you for your hint, next time I'll try hot water with baking soda to see if that works better!
@@ForgottenShineRestoration I use it quite often, just remember to first sprinkle the baking soda (I just eyeball it) and then pour the boiling water and let it sit for a couple of minutes and after that finish it with the dishwashing soap.
Ok, i will do it like that!
You don't have any unique and antique equipment? We also interested in old to new.
Bei so einem Minniteil ist, so glaube ich, steht blau besser🧐
leahcim ressik ist notiert :D große Sache rot, kleine blau - danke fürs anschauen
Never thought I’d spend my evening watching someone restore a mommy and baby vise but here we are haha. I love it! The green looks really good :)
Thank you very much! 🤣🐢🤗
hello
Hello...
A 5 gallon can of paint dried while this video was being watched.
LOL WILL YOU PAINT THE BOTTOMS FOR CHRIST SAKES!!! ALWAYS LEAVE THEM UNPAINTED, DRIVES ME INSANE LOL
Thank you for your comment!
@@ForgottenShineRestoration KEEP UP THE GOOD WORK BROTHER
Needs googly eyes
Awesome video, I think. After the third political ad I had to move on. Sorry.
I am sorry 😵💫🐢
Unimpressed, too much un necessary "work" just to fill time in a video, paint is too thick, black paint on tommy bar looks really bad, should not have been painted at all. You painted the jaws then sanded it off, why? Filing and sanding after painting is never a good idea, should have been done before final painting.