How To Fix Nespresso Magimix Airlock : No Water Flowing

Sdílet
Vložit
  • čas přidán 13. 12. 2021
  • Why airlocks happen
    1) Prop up & leave overnight
    2) Jog Top Lever
    3) Job Reservoir
    4) Airlock bag
    5) Blow through the pipe

Komentáře • 20

  • @andrewthoupos6836
    @andrewthoupos6836 Před měsícem

    Thank you so much for covering several options. I'd exhausted methods involving straws, biro body, syringe, silicone tubing, blowing, sucking, thumping, pumping, bagging, opening, closing, and swearing. The one that worked (wait for it) was propping it up slightly and leaving it alone for a few hours. I owe you a coffee ☕😃

  • @katekate4861
    @katekate4861 Před rokem +1

    My goodness, thank you so much for this video! I didn't want to start my Monday morning without any coffee. Thankfully, I came across your video. Method 2 worked. Enjoy your coffee non-stop!

  • @NoOne-fe3gc
    @NoOne-fe3gc Před 2 měsíci

    You beautiful man! FINALLY! I tried everything and nothing worked! I saw comments in other places saying they tried the siringe but nobody said how to use it. That method is what did it for me.
    I tried pumping, with and without capsule, on and off, tried the ziplock, straw, nothing! Removing the screen and using a seringe full of water to push it through worked.
    Note: I have one of those siringes with a silicon baubble in the tip, to do nose cleansing, worked like a charm after trying a couple times. Try pushing water or sucking it, might help

  • @s.noooze
    @s.noooze Před rokem

    BLESS YOUR SOUL! I spent so much time on the phone. The zip lock bag worked! I owe you my life 😭

  • @nicolenoyes4668
    @nicolenoyes4668 Před rokem

    I tried all methods described. Slowly pumping an air-filled zip-lock bag up and down within the partially-water-filled reservoir while the machine was operating fixed the problem. Thank you!

  • @pauladams3131
    @pauladams3131 Před 2 lety +1

    Thank you for this, I had the same problem during de-scale. Tipping it slightly from the back solved it immediately. Nice one!

  • @baasdup5094
    @baasdup5094 Před rokem

    Thanks mate! Used an air-filled zip lock bag with just about a cup of water in the tank, and pushed forced the water through. Excellent!

  • @darkrider6
    @darkrider6 Před 2 lety +1

    Thank you. Had the same problem after descaling, and pumping the reservoir solved it

  • @Ro-ow5jk
    @Ro-ow5jk Před měsícem

    Thank you so much. Worked like a charm!

  • @jimkershaw1966
    @jimkershaw1966 Před rokem

    this sorted my machine using the tippy uppy pumpy pumpy method - many thanks 👍☕

  • @mrajatkinson
    @mrajatkinson Před 11 měsíci

    Thanks very much for the tip. A (very) partially inflated balloon worked for me

  • @eera14
    @eera14 Před 6 měsíci

    It worked! 🎉 thanks for the video

  • @rebeccahartnett5885
    @rebeccahartnett5885 Před 2 měsíci

    Thank you! Pumping the capsule chamber worked for me but the bag had not.

  • @melanieklarofficial
    @melanieklarofficial Před rokem

    Thank you!!!

  • @robynfeather2910
    @robynfeather2910 Před rokem

    thank you so much

  • @xavierbreath2227
    @xavierbreath2227 Před 2 lety +1

    Pouring boiling water in the reservoir is the only thing that worked for me.

  • @summersue1234
    @summersue1234 Před 11 měsíci

    Don't understand zip lock methods
    Just put bag inside water refill?

    • @HowToVideosAndTips
      @HowToVideosAndTips  Před 7 měsíci

      That's right. It doesn't necessarily need to be a bag, as long as it creates additional pressure. Someone tried a balloon filled with air and that worked for them. You can partially fill the ziplock bag with air or water (not fully filled) and seal it, then put it inside the water tank while the machine is running and pull it up and push it down in the water tank several times while it is running. This forces the water through the machine at a higher pressure. It's like unclogging a toilet. You might have to do it more than once.

  • @411dify
    @411dify Před rokem +3

    These Nespresso machines are pure GARBAGE. I have two of them that stopped working and no Mickey mousing around will make them work again. Pure GARBAGE.