BTT SKR MINI E3 V3 installing Ender 3 Pro - Big Tree Tech SKR mini E3 Version 3
Vložit
- čas přidán 1. 07. 2024
- In this video, I'm going to install BTT SKR mini 3E V3 on my Creality Ender 3 pro. Big Tree Tech has released this SKR mini E3 version 3 not so long ago and I really wanted to have this board with the TMC2209 stepper drivers.
This bigtreetech SKR mini E3 V3 board is 32-bit and is very silent during printing. There are many 3d printers from Creality where this SKR mini E3 V3 board can be installed to like the Ender 5!
Link to the firmware:
github.com/bigtreetech/BIGTRE...
Link to the store:
Bigtreetech shop: www.biqu.equipment/products/b...
Amazon (aff): amzn.to/3FkpbFl
3Djake.com: www.3djake.com/bigtreetech/sk...
***************************************************
Merch stores:
teespring.com/stores/z3dp
***************************************************
Subscribing is free it doesn't cost anything just 1 click and like this video, it will help the youtube bots in taking over the world!
You can support me on Patreon:
/ zachary3dprints
Social Media:
Facebook: / zachary-3d-prints-1051...
Twitter: / 3dzachary
Instagram: / zachary3dprints
Streambeats from Harris Heller:
STREAMBEATS Copyright Free Music for Streamers (and CZcamsrs!)
Lo-Fi ►► www.streambeats.com/spotify/l...
Synthwave ►► www.streambeats.com/spotify/s...
EDM ►► www.streambeats.com/spotify/edm
Hip Hop ►► www.streambeats.com/spotify/h...
Rock ►► streambeats.com/spotify/origi...
On any other music service just search for Harris Heller
Happy 3D printing, Zachary 3D Prints
#Zachary3Dprints
#Z3DP
#letsmakesomefunwith3dprinting - Jak na to + styl
Seems to be a clean straight forward installation! Great video, thanks!
Yes indeed, plain and simple one on one, only if you have a BLtouch, it can give some issues... unless the firmware is adjusted/updated
I thought that too, except now my printer won't boot. Time to contact support i guess.
@@Zachary3DPrints what issues would a bltouch give?
Oh my god. I have been having the same issue with my v3.0 board and the bltouch. Please keep us posted on the firmware 🙏 your a godsend and instant sub just for this head ache issue I've been chasing down the internet like a snipe hunt.
Literally spent 8 hours trying to find firmware and compile it. Had no luck.
Oh thank you very much... yeah the whole thing with the BL-Touch costed me one whole weekend. I want to have downloads, that are easy to use and install for my viewers. Board is pretty new, I'll chase BTT for better firmware for the board with the BL-Touch
Yeah I can imagine that my friend, all other times it was easy to do get the right firmware, but not in this case.
@@Zachary3DPrints Olá estou com um problema na placa, instalei e passei o firmware para ela, porém não está lendo os arquivos do SDCARD, não consigo imprimir nada.
@@Zachary3DPrints I just this week installed the E3 V3.0 board on my Ender3Pro with BL-Touch. I compiled my own version of Marlin using the 2.0-bugfix branch, and the BLTouch is working just fine for me right now.
Great video. I'm going to try and put this board into my ender 5 plus so this should help. Thanks!
Thank you my friend. Make sure to use the right firmware. If you have some problem while installing, let me know
I've had a bunch of weird issues getting this to run on an Ender 5 plus running kerseys fw and the tft35 screen. I'm about ready to go back to stock at this point
thanks that was super easy.. i spent over an hour with another video. All i needed was a base install without the bl touch this was perfect
Glad it helped... A lot of people complained about the fact that I wasn't using the BL-touch.
Thank you for this. I'm new to 3D printing and tried to do as much research as I could prior to getting my under 3 Pro. So I figured I'd upgrade to the SKR mini 3 v3.
I kept wondering why I was having bed leveling issues and issues with X,Y axis etc.
Until you mentioned that this board has a port for the x, the y, two ports for the z and for the 3. I had my x plugged into my y, my y plugged into one of the z ports lol. Which could be avoided for beginners like me if they just marked that on the board, I'm thinking they go in the same order as the 4.2.2 it came with...nope! lol
Regardless thank you for your in depth video on the v3.
Thank you for this great comment, glad this video helped you.
I know its a year late, but if you look closely at the silkscreen on the board, the x, y, and z,z connections ARE marked, at least on the board I got.
Awesome video! Exactly what I need to install my V3 board that I just ordered. I also bought a pack of jst connectors with pre crimped wires on them that I'll just solder onto my fan wires.
Oh, that is great to hear
Thanks for the video! Do you think this would be worth installing on a Voxelab Aquila?
I'm not really sure about that, but since the printer looks like one, you can install this board to it as well
great vid! do you have the BL touch working on this board?
Nope not yet, I do have some other projects on the other printers as well, meaning that I didn't work on the issue
What issues are you all having with the bl touch? I compiled the firmware myself and got it working, is there something wrong with the one BTT put on their git?
I didn't go that far to compile the firmware, wanted to save it to another video. Yes, the one on their github acted weird making it loop the whole time and just going up the whole time instead of leveling the bed
Is it safe to attach the hotend male fan wires into the dc in on the board as shown in the video? I don’t want to have to buy a wire crimping tool.
I have done that too, but you keep hearing the fan blowing the whole time
@@Zachary3DPrints thanks for the response I’m just going to do that until I can get some crimpers then. Thx
@@niklaspajunen8439 Hey, did it work for u? I'm planning doing the same thing
One caveat for the dual z, it is a parallel output from a single driver.
Yes that’s right
Do you know how to connect it to Repetier-Host, it creates no com-port although PC sees it as stm32 usb device.
I haven't connect this board to Repetier-Host. The board has a STM32 on the chip, so that can be correct.
Thanks a bunch
Thank you too
Hi Zachary, could you make a video showing the install of a BL touch and how to set up the firmware? I recently grabbed one of these boards and I’m finding setting up the BL touch very confusing.
the Touch is the 5 pin connector seen wired in at 4:38
@@model3gt My colors for the Blue Red and Yellow are not in that order. Should I leave the connector as is or swap to match his colors?
Hello Guyroscopes, I have had some issues with the Bl-touch during the installation and recording of the video making it work correctly. By now they should have updated firmware. I didn't really get into the Bl-touch issue afterwards.
Thank you
Online there are schematics how the wiring should go and check the recent firmware from Bigtreetech if they have newer versions of it
Hello and thank you for your video. I followed the steps in your video but I have problems fixing the z offset. Do you have a video because I can't fix it. Thank you
Hello job27700, in this video I left the BL-touch portion out, since I had some trouble with it. But if there are newer version of the firmware, the Z Offset sound be in the menu under Level/leveling. The new offset should be stored after you did the offset
Please let us know as soon as you find any firmware to get the bl touch up and running
OK I will try to do this
My bltouch works perfectly fine with this board
@@JDMsohc did you get it working with the firmware from github or did you compile your own?
@@Zachary3DPrints hi, following up did you get the BLTouch working yet? Or will I need to compile my own firmware?
@@JDMsohc what did you do different than what Zachary did when it came to the bltouch installation with this board?
I have a Ender 3 Pro and I successfully replaced and installed everything except my fan.There’s 1 red and 1 black wire that I don’t see where it can go.Any help?
You can either wire it in tandem with the board power so that it is always on, or what's better to do is add one of the connectors to it that the other fans use and then plug it into its designated spot. I happened to have had something else with the same connector that I was able to cannibalize and use it for the fan, but you may need to purchase one if you do not
Hello Malik Hunter, I have installed them with a jst connector but you can also use the DCin, like mentioned by Adam Collins
Thank you on your reply on this comment
Ordered this board and was going to put it in my CR-10 V3 but it doesn't line up with the stock board mounts
OMG, that is not good, did I mention that you could use it on that printer? Doesn't it fit on all the mounts? How many can you use?
@@Zachary3DPrints I mounted it using 1 screw. I'm going to design a new box for it when I get a chance
Any plans on an updated video on this?
Hello, at this moment not, since I have used this Ender-3 pro for the tigtak UE3 belt printer. Since I have a new Ender-3 pro I will make a new video about this
So what's the point of this board if I can't even use a bl touch with it?
You are right then. But maybe they have now the firmware updated and you can use the BL-touch
Hey do you have a link to the dsd connector set
I bought them on AliExpress a while back, but you can find them everywhere
Hey, I read all the BL Touch comments here in an attempt to figure out why I'm having issues with BL touch using this board. I tried the github firmware, both bltouch with z homing and standard bltouch, all with no avail. I tried building my own firmware and still an issue. Pinout looks the same order, in the 5 pin port, and even tried with the z stop connected and disconnected with mixed results but still a fail. is there any solution and/or updated video for this issue?? better yet, a link to tested and working firmware with the bltouch?
Sorry for my late reply. Great to read the things you have done. Amazing! I haven't found any solution and am not using the BL-Touch on my Ender-3 pro
I installed this in my Ender 3 Pro with CRTouch and new TFT screen. Cant seem to get the levels set as it is always to high even after i level the bed manually and with CRT. Also, why does it now reconize my printer as an Ender 3 not E3+
Yeah I did had some issues with the BL-Touch and therefore I have deleted the ABL from this printer. With mine when I did wanted to home, the gantry went up more and more...
Do u have the btt tft35 screen install video?
Yes, I think that was the TFT35 screen
will this BIGTREETECH® SKR MINI E3 V3.0 Motherboard for Ender3 fit my ender 3 V1? monochrome LCD
I think it will fit, connector will go into the same spot
I'm get a "sd init fail". And when trying to preheat it says heating fail: E1
hello, that sounds like a SD card issue. When you get a E1 error, please check your wiring on the board.
Now, am I going to have to upload firmware for this or is it ready to go?
Hello, usually on this board is firmware installed for an Ender printer
@@Zachary3DPrints ok thnx no worries then appreciated
does it work with the stock lcd screen ? ender v1
Yes it should work with the stock screen
Does it work with the btt tft70?
I think it does, but not really sure... tbh
4:08 - both the red & black go into dcin?
Wow, you been waiting 12 days, just got my board and really wanted an answer to this myself because the video isn't clear, the back wire just blends into the background...
Anyway, I have the answer for you...
I tried to put them both in dcin. It didn't work.
So then I put the red wire in the dcin and the black wire in the ground. It worked!
Hello Next Lvl Roy, at 4:01 you can see that the wire is going into the black DCIN.
Hello Zelious Sigma, thank you for your reply on this comment. Could it be that the wire didn't make contact with the DCin? Normally there should be power on those wires from the PSU. But great that your solution did work out for you by using the ground from the machine.
@@ZeliousSigma any safety issues with this method?
any eta for bltouch?
Not yet
Did you say dc in. Or end. At 4:07
Hello Phillip, I did say DC in.
I bought it for ender 3 pro and pretty sure never gonna do it....
It has multiple missing components and I had needed days to go shopping thing i never ever in my life heard of and hoping I won't kill the printer in the process. No helps how to put it together so i came here for this video to...
Great to hear that this video could help you out. Yeah sometimes it can be challenging to do this, I fully understand that… for that reason I still didn’t update the firmware, because it takes time to run through the whole firmware to get it right
@@Zachary3DPrints right now it works. I swapped my magnetic bed to mirror one and now the only struggle left is make it stick to surface but got annoyed and my current print goes with hair spray
2209 drivers...
Did I said 2208 then? Btw you were in the shout out of todays video... it's kinda new thing I wanna try out on the channel
Gaming motherboards for 3d printers
Oh yeah indeed... only watercooling and some RGB lights and graphics card for the screen
so an install video but you actually dont explain anything? kinda of crappy video to be honest lol
I'm sorry that you feel this way after watching this video. In which ways could I have improved the video, so it won't happen again in the future?
Video totalmente inutile
Mi dispiace per questo, amico mio
stop smoking
Oh… I didn’t know buddy. But if it’s about my teeth color, then it’s something I have tried to get white but it’s very hard to get them white. I’ll do my best