Video

For some reason the gcode seems to not be fully recognized when I put it on the printer. I don't know what I did wrong here. The objects don't render a preview and when I click print it errors out. Anyone else run into this?

great video Zach

So this is where the song comes from!

They are so late to the game. I'm not sure if there's still hype for corexy 3d printer. They've all have come down in price as well. Other new 3d printers are coming out with multicolor. I want to be excted for it, but I'm not, its all the same. Does it seem like people are losing interest in new 3d printer? Doesn't seem much progress is being made since bambulab released their corexy. Since, its all just failed copies of their machine.

hi! wich version of crealty print are you using? i have not that option on 5.0 or above. thanks!

the volume is 256 x 256 x 250/256 someone on the FB got the bed photo

another note. the '2nd extruder' he said to ignore in the firmware can be used to drive other motors. If like me you have a dual z kit with two steppers, you can plug the second motor into it's socket then configure the settings in the firmware to enable your z steppers to operate independently allowing the use of the G34 code for Z-stepper auto-alignment to better level your gantry. So only ignore that in the firmware if you're not using that driver and slot on the mother board.

for the case and having space for the USB and SD card slots, Biqu has STL's for a replacement case that fits this board perfectly that can be printed with PLA.

good video, but maybe invest in a noise cancelling microphone. sounds like a fan is running near you.

Another copy to come in at a cheap price, avoiding customs. One has to wonder if these chinese companies share with each other, or are given designs to run with in order to secure market share in the US.

I'm a little unclear about the Creality cloud bit. Are you able to retain local network functionality without accepting the Creality Cloud privacy policy?

Maybe if creality focussed more on the slicer than all the adds and irrelevant sales on their redundant app the slicer might actualy be less problematic,but from My side Creality print is a definate NO GO on any platform

i have officialy given up on crealitys awfull slicer and would never suggest it This slicer wil cost you Time and Money No wonder everyones using ways around it to rather use any other slicer on the web,so far everyones packing up and headed to Orca and i must say,first print allready gave creality a hiding in their own back yard on my K1c

Do voron work well with petg parts?

It would be better if you give more tips instead of a general explanation, it’s good anyway. Thanks

Can you please, next time you're going to record in a noisy environment, use a lavalier mic and/or noise reduction? I can't hear shit.

هل هذه الاعدادات مناسبة لطابعة CR-M4 ؟ , if you can help me

Guess ill clean my bed check the screws and lubricate the moving parts. LoL Great video thank you.

I just want to say thanks. I got this printer about a month ago and I just now figured how to get it to work! This video really helped with my settings and I really appreciate you! Thank you

I think i found the problem. I have same issue. Im new to this BUT, after watching your vide... people are going to the creality blog/ender-3-v3-ke-cura site where there is a post on how to put in the settings. They (me included) del the Start and End G code and just cut and past what is down below on the page; expecting it to work. The GCode doesn't match yours. That said, you hsould post your GCode start and end so we can copy yours.

Are the supports easy to remove like the bambu printers ?

Thanks for great videos :) I wonder though, did you switch the X and Y steppers? As I understand the Ender 6 needs to switch those on the skr mini card, and I can´t see the labels on the cables in your video...

Hola! tal vez puedas ayudarme, tengo una CR-M4, no hace el autonivelamiento ni imprime y se queda en la pantalla de carga, ayuda!

Have a V1 original Anet A6 since they first came out, Using a 3mm glass plate sprayed with pva glue and water mix has worked great. if done right you cant see it when dry and the prints are glass smooth. Making sure the motors are level is essential for this printer. small print to fill space in gear drive allows TPU at 50mms which has worked very nice just a pity you cant glue tpu

BambuStudio ist nicht gut für den K! , K1 Max oder K1c. Dafür nimmt man die bessere Varriante den OrcaSlicer. Mit den Orcaslicer hat man ein wirklich mächtigen und super guten Slicer der das beste aus den K1 raus holt , sobald man das Filament Kalibriert hat

You selected Klinger for your G code flavor. If my K1 Max has the stock G code flavor, what is my selection? Thanks! I've wanted to use a new slicer for my Max, but haven't had any luck. Creality 5 has issues, so I'm still using the older Creality print.

Thank you

Greatings from USA.. I see you put a lot of time and critical editing into this ..👍.. many shirts and days! Instead of measuring nozzle height buy estimate and eyeball look, couldn't you lower the nozzle to the bed from the screen menu, then use that number?

happy printing..

Looking forward to your impressions of this machine after you've got some time on it

First, but not last!

Thank you for doing this so we don't have to. 🥲 now I don't feel so bad leaving it in there for a day lol

can you add creality printer to bambu studio?

Hello. Can you share the printer.cfg file you use? I'm having trouble triggering stepper motors with my mks robin litev1 cfg. The cfg file you are using seems to work fine.

Thank you :-)

Would the cfs be compatible with the ender v3?

Pls help me i have a extruding problem after the first layer i hear a hard knocking sound idk the issue

not the best I have seen, almost the worst.

This is nothing more then an advertisement for creality cloud. A service that has been proven to to have stolen private stl

Pls help me my extuder doesnt work on the ender 3 v3 ke

Thank you so much for this tutorial, creality did a bad job explaining it, now I can print my benchy!

Agree 100%. Creality shouldn't be releasing a printer WITHOUT ANY profiles (Ender 3 V3 Plus for a whole week without one after launch. Orca released one first before Creality) but still leak profiles for a printer that's not released till October (K2 Plus).

I had like 5 failed prints because of bad, bed adhesion using Creality slicer, you Sir have saved my believe in 3D printing, THANK YOU!!

Cura needs to look at time counter. Because its just not good. The time they say on small prints is good . Bud on bigger prints. Its never wricht

Hey do you know if I can upgrade the cpu cooler to a Thermalright Peerless Assassin 120 SE I’m not sure if there’s enough space but also, is it able to install fans in the front panel?

Je bent nederlands he?

Hi how get the easythreed x1 ino thank you.

Root it and use Orca ;)

Make a song! 😜