Video není dostupné.
Omlouváme se.
My CHEAP SIMPLE DIY DYNO - ELECTRONICS
Vložit
- čas přidán 3. 09. 2017
- My Arduino based dyno setup.
Simpledyno Software
sites.google.com/site/simpled...
Hall sensor
sensing.honeywell.com/1GT101D...
Music by Double Lyfe, check him out on SoundCloud!
/ doublelyfe
Double Lyfe - 1950's Jazz
Support me on Patreon!
/ 2strokestuffing
Donate to 2STROKE STUFFING
www.paypal.com/cgi-bin/webscr...
Instagram
/ 2strokestuffing
twitter
/ 2stuffing
facebook
/ 2strokestuffing
I would be interested in your dynoArdyno as a kit.
Watching your CZcams show has inspired me to build my own dyno for dirt race kart motors. I've been able to aquired the needed parts and materials and have started the assembly.
Just need the software and sensors.
You have an awesome CZcams channel!!! Never would have attempted such a project if I hadn't ran across you show. Carry on!!
Thumbs up for the use of a 555! And thanks for explaining how you did it. it looks a lot simpler now I understand! :D
+gilgameshismist Thanks!
Definitely interested.. Thanks for the info!
Love it! You could make it fancy, but why bother. Too right!
Definitely interested im currently working on pi dash for bike as well as remote start
Fun watching an old video , have to catch up !
This sounds helpful. Will it work on 4 cylinder engine and what about diesel engines
Can you please do a nitro RC truck version of the dyno set up u have been talking about please
I'd love a shield as a kit. Keep up the great videos!
+Brian Aldridge Great, thanks!
+Brian Aldridge Boards are in, see latest video for info!
@Brian Aldridge did you get the boards. I would like to talk to you. Can we chat through email. That would be great.
Love the cigar-waving explanation. More pulls in-between sentences. :D
Do you have a more complete schematic than the one shown? Reason I ask is that the schematic doesn't match the PCB layout. Thanks a lot!
WHERE CAN I found info about Arduino sendor wiring?
I commect to Arduino PIN2, set in Symple Dyno 6.3. Com port, activate, but RPM1 not workimg.
WhatI do wrong?
Did you ever make some of these for sale? I'm in the USA and I repair vintage metric motorcycles and I'm going to build a dyno. I would be grateful for any advice and a board like you have. Thanks.
I'll take a board when/if you do a kit :) ready to go or in kit form either way is fine.
+Hollaendaren 👍
Nice work! Does the ardyno shield support load cell input?
Great video, I'd like 2 boards or kits ether one. It'd be nice if one of the inputs were set for O2 sensor. How much to Adelaide Australia?
+Mark Gulyas Thanks! Great! I'll look into the O2 sensor input. Not sure about pricing yet, but I'll keep you guys updated!
The shield is connected to alluminum foil and at negative of the board?
Hey man, do you have any kits? I'd like one of you doz building a dyno with a drum in about a week.
i thinking about building a dyno like yours. i like to have one of your shields. what for connector you are using with this on the computer?the simple thing was with the microphone input, but yours not?
hai, i really would love to buy fully soldered board. i need to build a dyno for my sons 60cc go kart engines
Can you add an oxygen sensor to this?
I'm Planning to make a dyno how much if I buy to you ardyno full set and software?? Bro can u help me I'm from Philippines
another great video. :)
+Joseph FELICES Thanks!
You can use s serial Bluetooth which costs 2 USD via eBay :) instead of s serial cable.
Hello! I would very mych like to buy a complete soldered card like that from you if they are still available?
hello bro i need one but shouldn't be very expensive
I'd buy one!
im intersted im from Serbia how much will it be and how much will shipping be
Hi! Is it still actual buying one! Awesome job!
If you make a kit i am really interested ! Great stuff man, continue that way 👍
+Nicolas Galley Great, thanks!
+Nicolas Galley Boards are in, see latest video for info!
Are they still available?
@@jaxtonramsey830 sadly no
@@einhase6924 oh dam u have asked him?
the link for simple dyno does not work any more any ideas were to find it cheers
shield kits would be awesome, get it happening !!
+Christopher Lord Check my latest videos, the boards are here!
Er det muligt at koble en AFR måler og en tryk senser bar/psi på også? Hvis man nu ville bygge et rullefelt til biler.....😎
+Peter Ipsen Absolutely, no problem!
I'd love one of your shields! :D
+FORCED-INDUCTN Great!
+FORCED-INDUCTN Boards are in, see latest video for info!
I'll take one
ardyno.weebly.com
So I need the whole thing already assembled thanks brother please do let me know though good work brother good work
+Critical Mass Critical Mass Thanks! I'll let you know!
+Critical Mass Critical Mass Boards are in, see latest video for info!
i would like one please as i am building a dyno in Adelaide, Australia.
i think a lot of your diy viewers, can manage to source the components themselves(ebay with free shipping). so i suggest just selling the bare PCB.
How much all that fir ardyno parts and diagram
Please can you share software dayno sir 🙏
id like a kit complete with sensors and egt to suit the software please
+aussieboy424 Boards are in, see latest video for info!
hi sir..how much is the whole kit?im intersted frim Philippines :)
Definitely interested..
+Sean Fiba Boards are in, see latest video for info!
Do you sell the board completely assembled?
Hi, are you making and selling the boards?
Do you sell this hardware for inertial Dyno?thank you
Very interested in a board. Great videos.
+Duncan Bullock Great, thanks!
I am interested in a kit i can solder it my self please contact me birdiebertus@hotmail.com
Best b.g veenstra from holland
+B.g Veenstra I'll contact you when the kits are ready!
+Duncan Bullock Boards are in, see latest video for info!
Hi!
Need to buy One Ardyno shield! Please help me!!!
interested if the price is wright, can solder it myself but a complete board would be nice.
+Bert Van Assche Boards are in, see latest video for info!
yes! hp numbers for modded husky chainsaws!!!!
you are one cool dude :) and sounds fonny wen you speak :) i am from danmark :P
+TEAMVISKAT81 Haha, thanks! Greetings from Norway!
I'm a bit late to the party, but the link for simple dyno is broken, and I can't find the Arduino sketch anywhere. Do you have any new links?
Sell them as a kit. It'll make life easier for you. Looks like you were enjoying that cigar. Couldn't quite see the band but it kinda looked like a BlackMarket.
All the best,
Jay
+Jay Dighsx That's probably a good idea, less work and probably less faulty units... Haha Yep, BlackMark Punk. I'm trying out some smaller sizes. Enjoyed this one, enjoyed a Alec Bradley MAXX Nano even more, try it if you haven't.
+2STROKE STUFFING Btw, coming back to your mail soon, you know how it is...
are you still making this one?
Is this module as accurate/good as a headphone if I only want to know the rpm?
+SWED Typez Just as accurate, but so much easier to get working right. If you want roller rpm only you can get by with just the Arduino, a hall sensor, and a pull up resistor.
Hi, would like to know if this system could be used for an rc car electric..?
+greg sterner absolutely!
+greg sterner Boards are in, see latest video for info!
How many units do you need to make it worth you getting the kits togeather, I will be in, burt uk
+Burt Johnson Great! Judging by the comments there seems to be alot of interest. It's happening! I'll make a video soon!
+Burt Johnson Boards are in, see latest video for info!
Cool thing
I'd like to know the cost of one or two bare-bone shields (just the PCB) shipped to DK
+Tacit Tacet I'll let you know when they're ready!
+Tacit Tacet Boards are in, see latest video for info!
Hi, I'm trying to contact you by email, however does not delivery for you. How can I buy one?
Awesome video. Already sent mail and waiting your response. If you buy with all sensors I really purchase.. you are great...👏👏
I'll buy a kit when you have them ready!
+Seppo Repo Great!
+Seppo Repo Boards are in, see latest video for info!
Algún planito del circuito
I,m interested for sure.
👍
Hi are you still selling the shield if not could you send me the Ferber files please bro
Bisa kah saya beli modul nya
for the dyno how much in amercian money would you charge me to make that
+SHANE DICOCHEA I'll be selling PCB's with partslist and instructions for 10$ free shipping.
yes ver
what software did you use to create the PCB layout?
+MecGarageLab Fritzing, it's not the most advanced tool in the world but works great for a newb like me😁
Where to get the software? Tia
Question what trigers the 1GT101DC?
+B.g Veenstra An m6 bolt, it can trigger on anything ferrous.
I would be very interested in a kit.
+Mark Nowakowsky Boards are in, see latest video for info!
Yo quiero! Spain!
Can you put the translate subtitles in this video?? Thank you
+marco solaro What language? I'm sorry to say I only speak English, Norwegian/Swedish/Danish and some German...
Helt rått! 😁
+Aprilia RS 125 hehe, Takk!
may i buy your Shield ?
có bán không ạ
Ett kit låter som en god idé. Så slipper man leta rätt komponenter och du slipper svara på frågor. ;) Löda kan jag göra själv. Kommer det funka med lambda-input? Minns inte riktigt hur det såg ut i Simple Dyno. Minst ett kort/kit behövs här iaf...fast det skrev jag ju på IG oxå...så nu får jag väl massor med kort. 😂
+andli461 Blir kit! Prater om inputs etc. i neste video!
+andli461 Boards are in, see latest video for info!
Jag vill köpa ett kitt hur betalar jag och vart skickar jag adress
ardyno.weebly.com
I would like one in kit form
+Doktor Jönsson Boards are in, see latest video for info!
hello I wanted to know where did you find all the electric part (arduino ... etc) can you give me the website thank you hello France
+mci furaxx03 I buy most stuff locally, but I can recommend both sparkfun.com and adafruit.com.
thank you...
could be interested if the price is right,to the uk
+Adam Brown Boards are in, see latest video for info!
I would be interested as well. I can solder it up myself. Do you have a parts list?
+Richard Young Great! I'll make a kit with the pcb, components and instructions!
+Richard Young Boards are in, see latest video for info!
Id buy one!!!
+Jonas Gagiskisas Great!
+Jonas Gagiskisas Boards are in, see latest video for info!
Depending on price I would also be interested
+James Ford Boards are in, see latest video for info!
I would be interested in a kit as well!
+john rodabaugh Great! I'm sorry to say I will only be selling bare PCBs tho. It's due to very high component cost here in Norway. There will of course be a partslist and instructions on how! Will be 10$ free shipping. Probably ready before Christmas!
2STROKE STUFFING ok no problem. I can get the parts here. I look forward to getting one set up!
+john rodabaugh 👍
+john rodabaugh Boards are in, see latest video for info!
Have you made any progress on this? I'd be interested in one.
+Geoff Eldridge They should be ready before Christmas, stay tuned!
+Geoff Eldridge Boards are in, see latest video for info!
Interested in a shield!
I can soldering it myself.
+David Steinhour Boards are in, see latest video for info!
I am interested in buying one! How do we find out when we can buy one?
+neorules1 Great! There'll be a video about it!
+neorules1 Boards are in, see latest video for info!
Did this get to sales , how do i get one ?
Sure did! ardyno.weebly.com
Can I have the tinfoil to stop the CIA and aliens beaming thoughts directly into my brain please? :)
Great video, fun and informative as always. Cheers, Marty.
+martin allen Haha, thanks!
Keen for shield as a kit
+Peter Hollis Great! I'm sorry to say I'm only going to sell the bare PCB's though. I'll of course provide a partslist and instructions etc. See my latest "weekly stuffing" for why.
+Peter Hollis Boards are in, see latest video for info!
Epic!
how much for a kit shipped to czech republic?
+MrSlehofer Don't know yet, but I'll keep all you guys updated!
+MrSlehofer Boards are in, see latest video for info!
how much total cost incuding shipping to Philippines.. thnkss
+John Delgado I'll let you know when the kits are ready!
+John Delgado Boards are in, see latest video for info!
Yep I'd be in that soldered up please how much to Melbourne australia
+fishingsgreat Cool! Shipping is about 10AUD to Australia.
2STROKE STUFFING cool let us know how much for the completed board once when you get it all sorted thanks
+fishingsgreat 👍
I'm from Victoria Australia and would be interested in one also thanks .... oh and love the vids
+Hank Burton Great and thanks!
Hi. Would you sell me a kit please? I'm building a dyno for my kart engines
How much cost complete set with sensor? I am here at UAE.
Sorry, only bare PCB's. I'm currently out of stock, should be back within a month.
Ok, can u send me the sketch code..
dbr81777@gmail.com
You can find the sketch on the Simpledyno site, boards should be back in stock today btw.
Jeg vil også gerne købe👍🏻
+Peter Omoe Boards are in, see latest video for info!
Im interested Boss
I will take a kit/bare board
+pitobread Boards are in, see latest video for info!
kit