DIY DYNO BUILD Hardware And Software Needed
Vložit
- čas přidán 27. 02. 2020
- DYNO UPDATE A QUICK VIDEO TO SHOW YOU SOME OF THE COMPONENTS NEEDED TO BUILD YOUR OWN HOME DYNO PCB BOARDS ARE AVAILABLE TO BUY FOR £10 FOR SUBSCRIBERS ONLY INCLUDING SHIPPING IF YOU REQUIRE ONE LET ME KNOW THANKS AND HOPE YOU ENJOY THE VIDEO
For pcb ardyno broads payment via paypal redtopvolvo@icloud.com
Please state how many and postage address when ordering thanks
For people who have asked there is a eBay listing for pcb but at extra cost due to eBay fee’s rover.ebay.com/rover/1/710-534... - Krátké a kreslené filmy
Great video!
Thanks for the video. Seen 2 stroke talk about having these, just bought one off your Ebay. Thanks again
Thanks buddy
awesome content
Thanks really appreciate the feed back
Thanks
nice sir
Can suggest how develop bench dynamometer for motor testing ?
Are the ardyno boards still available im interested in it for a project?
Ola boa noite. Vc ainda tem alguma placa. Para vender.ela viria pronta para usar ? Como.vc mostra nos videos. Onde eu consigo comprar. Desde ja obrigado!
Did you have a copy of the board files .......?
Muito bom seu vídeo, parabéns..!
Como consigo o link do software?? Vc pode fornecer, e quanto cobra pela informação?
Outra coisa vc tem um projeto desenhado de como fazer a rampa, o rolo, para vender??
E o arduino e o microprocessador? Teria como fazer um pacote ?
Muito obrigado pela atenção, moro no Brasil e aguardo sua resposta, bom trabalho e sucesso.
Hi, great video and Interested to give this a go. Are you able to supply the board and software as a complete package? I also work on smaller bikes and would be ideal to assist with tuning and performance upgrades.
Re-Clone-Cy-Kick Hi the software is available online for free this a diy build kit the info is all on simple dyno website it’s goes far more in-depth on how to do it all I can only supply is the ad-on board shown it this video you will need to build that also it’s a good project to start I’m no electronics wizard but managed to sort it take your time and go through the available online manual and it will start to makes sense
@@unpluggedautomotive878 Thanks for the prompt reply, can you perhaps send the link please and then I would be interested in one of your add on boards. Many thanks.
hey man do you have one of the boards for sale ?
I would be interested in purchasing a shield or two . Are they still available.
Yes there some on my eBay shop still www.ebay.co.uk/itm/274955609213?mkevt=1&mkcid=16&mkrid=710-127635-2958-0
Did you buy the boards as it is or you got it made? Can I talk to you through email?
hi. can you give me the code ? thank
Do you have anymore of the ardyno boards
Only a few left
anh có bán không ạ
I'm a subscriber can you tell me how to buy
Hi good video do you have any of the boards left and how do I get 1 from you thanks
Thanks pal there only a few left listed on my eBay here’s a link below www.ebay.co.uk/itm/275027854503?mkevt=1&mkcid=16&mkrid=710-127635-2958-0
Can you pls help me with my project
good idea .. can i get the device
Jalaludin Puku Jalaludin Puku Hi can post you a pcb board but there are postage restrictions for over sea’s at the moment due to covid 19 so please email me with enquiries redtopvolvo@icloud.com
Can I buy the one of the boards off you please bro
Any more boards? Or file to make my own?
www.ebay.co.uk/itm/275300336308?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=0BkCit7hR7S&sssrc=2051273&ssuid=0BkCit7hR7S&var=&widget_ver=artemis&media=COPY
hi there buddy, can i buy ardyno board from you? thank you
Softwar pleas
I Can buy software for you ?
hi have u got a contact as would like one ur bords m8 and woul like know if u would do like a full ready to puck and play set up thanks
Matt Ronerts Hi thanks and you’re welcome to make all enquires via email turbzboom@gmail.com
thanks m8 have sent u an email
Hallo can i buy from you ?
Spend a couple of bucks and mount your camera on a stabilizer before we all fall over ........
Please I buy software sir
Hi do you still have any boards for sale?
Cheers
There are few on my eBay mate www.ebay.co.uk/itm/274735685487
Could you send me the web site for the soft wear, thanks
It’s called simpledyno it’s available online somewhere
@@unpluggedautomotive878 thanks
are there still shields available I'm looking for one
Yes a small amount still available
@@unpluggedautomotive878 can i order one?
@@lucashoekstra634 yeah of course £15 via PayPal shipped worldwide shipping
how do you get the dyno screen settings folder?
you have to use the icon on the main screen to make your own setup screen then save it to a file so you don't have to set up every time you turn on the software there is a operation manual with the down load file take your time its all quite simple i'm not the best with computers if i can do it anyone can
I'm i need of a dyno board to measure roller speed, tire speed and engine rpm for 1/4 scale rc cars with 2 stroke engines
I'm i need of a dyno board to measure roller speed, tire speed and engine rpm for my 1/4 scale rc cars with 2 stroke engines
Warren Jackson this would be great for that
@@unpluggedautomotive878 Do you have a pcb for sale ?
Warren Jackson yes there a few only info is in the description
THANKS , I purchased 2 pcb
Warren Jackson 🤟
heelo sir link ebay erorr
Hi do you have any boards left i have looked on Ebay but can't find them.
I do have a select few left if you message me on eBay will list one for you
Hi what is your user namw on ebay cheers Simon
@@simonholgate1595 gigg-quagmire
Hi cant find you as a seller on ebay as gigg-quagmire
@@simonholgate1595 ebay.co.uk/usr/gigg-quagmire
How much is the board
£10+ postage so £12.50 all in to subscribers like yourself 🤙
How do I set up the arduino any help
That a very difficult question to answer what issues are you having
Simple Dyno is not reading my hall sensor
@@itshookn8155 check your baw rates are correct there are options in the settings to do this when you added the sketch file to you board it asks for that info to be added I would print a copy of the simple dyno manual and take your time step by step
i want to order ardyno from you, can you ship to Philippines?
Hi yes have shipped a few to Philippines eBay listing is below 👇
www.ebay.co.uk/itm/Arduion-Pcd-Shield-ardyno-DIY-Dyno-/274986981137?mkcid=16&mkevt=1&_trksid=p2349624.m2548.l6249&mkrid=710-127635-2958-0
Hello, I bought a pcb from yours, but I have problems with the roller sensor, I do not know if is the hardware or software, can you help me?
Explain the issue I will of course try to help you out
@@unpluggedautomotive878 In simple dyno software, I have got signal in the RPM2 gauge, using the hall sensor and using the capacitive clamp. But using the same hall sensor connected to the roller connector at the pcb, I have not signal in the roller gauge. I do not know if I have to configure anything in the software or if I have to use another gauge etc....
@@02kula ok there is a sketch file for the dyno shield and one just for the normal Arduino make sure you have uploaded the correct one if go on the ardyno web page the file is listed on 2strokestuffing webpage
@@unpluggedautomotive878 yesssss, for shure will be this problem, because I used the sketch from Simple dyno, thanks, I will say you after test it, thanks again
sorry, I can not find the right sketch, is not on the ardyno website, because there explain to load the sketch from symple dyno, its like I have done
i want it sir..i have a roller butbno software and hardware and sensors..im from philippines hope you can help me :) how can i contact you sir?
Information is in the description they are available to buy on uk eBay www.ebay.co.uk/itm/274579324833
@@unpluggedautomotive878 ok sir..thankyou :)
Can I buy the whole unit from you, setup for scooters,can you contact me, asap,thanks
Ralph Smalls unfortunately I don’t sell them completely built I don’t have the time sorry
@@unpluggedautomotive878 I sure would be very interested in purchasing one,trying to learn how to, dyno scooters I'm starting to race them,they are very big here in Connecticut, I also own my own shop if you were to build one for me I would be very grateful, plus,it would be a great asset to my business, can you help me, me out ,money isn't a problem, please help. Thank you or lead me in the right direction.
hello can i buy from you?
Some listed on eBay
can i buy ready to use?
@@moto_jp243 unfortunately no only pcb boards 6 available and I won’t be doing anymore
@@unpluggedautomotive878 Hey, Is there any left on ebay? The link isn't working and I would absolutely love to get my hands on one. Where Can I buy it?
@@Jack-di7ii hi unfortunately the software is hard to find and I have a handful of boards like 5 or so was just going to keep them for myself but could send you one if you desperately want one
Please ,Can you send me software at email? I would like to download it, but it seems somethink wrong happen. Page havent been found. I dont know what to do.