SimpleDyno - Basic Hardware and Simplest Sensor Setup
Vložit
- čas přidán 17. 10. 2013
- Demo of using SimpleDyno 6.3 with a basic motor dyno setup and simplest RPM sensor, a magnet and set of headphones.
Get your free copy of the application at sites.google.com/site/simpled...
Questions or Comments? Post them at the SimpleDyno forum z7.invisionfree.com/SimpleDyno - Auta a dopravní prostředky
Thanks a lot it's a good eye opener
Link to the software is not working is there another link
Thanks
How do you get the program to download to computer the dyno
i got Ver 6.5...where can i get manual? want to clarify some terms. so stuck up due to that. thanks.
Hi I can not find the software at your link below. May you add the new link please ? Thanks. Mario
Can i get a list of things you used for this. I wasn't able to clearly take note of the things since your voice was vibrating much..also i noticed that there is like a silicon like circle near the axle..what wast that
For this basic setup I used a motor, switch and battery as the dyno. I used 3 CDs epoxied together as the flywheel. I inserted a small, reasonably powerful magnet into the flywheel. I used a set of stereo headphones for the sensor. The dark circle you see is just electrical tape that I used as part of creating a mount for the flywheel to attach to the motor.
Very nice , as simple as it gets. Thanks.
The link is no longer working . Is there a way to get a copy from you.
I look at a copy too ! :)
@@MrFlocross Thanks for getting back, I found a link to it.
@@JandJRepair is there a way you can send me a copy?
@@JandJRepair can you send the link?
Hi how are you doing I was looking at your video and I couldn't find the link what the title app I have built me a Dino and I was trying to find out how to put the electronic links and stuff to it if you have any ideas could you share them with me please
hi, nice work there. could you give the link of software?
Sorry for the slow response. You can get the software at :
file cabinet | simpledyno
@@DamoRC1 the site doesn't work. Is there any other way to download it?
Used the software and logged 17.2 seconds of data. When we try to look at it on the "Data Analysis" screen, the X graph at the bottom stops at 10 seconds. The graphed lines go past that. How do I set the X to go to more than 10 seconds?
Sorry you are having trouble. Send me the data file (*.sds) to damorc1 at hotmail dot com and I will have a look at it.
remove the diaphram from the headphone, it will no longer act as a microphone but the coil will still react to the magnet