How To Vinyl Wrap Your Hood
Vložit
- čas přidán 14. 07. 2024
- Jake teaches you how to wrap your own hood in color change vinyl.
Don't want to do it yourself?
Bring it by the shop and have Jake do it for you!
Find all your detailing and window tinting supplies and tools at www.carguysupplies.com
Use code: NOWOPEN for 15% off your first order.
My Favorite Products
Leather Conditioner - bit.ly/2KvLDEc
Fabric Protection - bit.ly/2X7YPR3
Clay Bar - bit.ly/2X3N26n
Dirt lock - bucket insert - bit.ly/2Igy9dm
The AM Details product line - bit.ly/2ULHYWR
Car wash soap - bit.ly/2UwxJGD
Tar Remover - bit.ly/2X17gxm
Optimum No Rinse - bit.ly/2GiZsBO
My favorite polish - bit.ly/2WZOAhI
My favorite drying towel - bit.ly/2X3QD4n
Products for matte paint care - bit.ly/2UaetcV
Lake Country Buffing pads - bit.ly/2X537ss
My favorite window tint installation tools
The Conquerer - bit.ly/2VGwMYK
Original EZ Reach - bit.ly/2IoZWb3
Must have for back window installs - bit.ly/2KtcFMt
The only knife you should be using - bit.ly/2D8NIQo
Camera Equipment
Sony Alpha a6300 Mirrorless Digital Camera (Body Only)- amzn.to/2zR68QW
Sony A7iii - amzn.to/2KEGeee
Zhiyun Crane 2 Gimbal Stabilizer- amzn.to/2IAjbP5
My Main Len - Sony SELP18105G E PZ 18-105mm F4 G OSS- amzn.to/2zPxhE5
My Other Len Sony SEL35F18 35mm f/1.8 Prime Fixed Lens- amzn.to/2CfLOic
My Vlogging camera Canon PowerShot G7 X Mark II- amzn.to/2Cd8uj7
GoPro HERO5 Black - amzn.to/2Cot5Ol
Rode VMGO Video Mic GO- amzn.to/2BYGITr
Follow us on social media
Chicago Auto Pros - Facebook - Lombard - bit.ly/2VEtkOn
Chicago Auto Pros - Facebook - Glenview - bit.ly/2G75KmO
Chicago Auto Pros - Instagram - bit.ly/2Ig7bTr
---------------------------------------------------------------
Contact us: www.chicagoautopros.com
Glenview - Glenview@chicagoautopros.com
2075 Johns Court
Glenview, IL 60025
(224) 432-5462
-------------------------------------------------------------
Lombard - Lombard@chicagoautopros.com
207 A Eisenhower Lane
Lombard, IL 60148
630-474-9263
-------------------------------------------------------------
Jason's Email-
Jason@chicagoautopros.com - Auta a dopravní prostředky
Saved 2K and wrapped my hood.! Now ima do the rest with confidence.! 2k is the whole car wrapped btw.
One of the best quick how to videos I've seen on here. Usually the videos are way too long, or they are literally not at all what the subject of the video says they are, and a complete waste of time trying to watch. Thank you for making this video, it's made me feel more comfortable in preparation to try to wrap the hood of my car.
most of them are 40 minutes long lol
i dont mean to be so offtopic but does anyone know of a trick to log back into an instagram account..?
I stupidly lost my login password. I appreciate any tricks you can offer me!
@Vivaan Avery instablaster :)
@Kasen Gabriel i really appreciate your reply. I got to the site through google and im in the hacking process now.
I see it takes a while so I will get back to you later with my results.
@Kasen Gabriel DAMN IT ACTUALLY WORKED :O Literally got access to my instagram password within about 30 minutes by using the site.
Had to pay 15$ but definitely worth the money =)
Thanks so much, you really help me out!
Always thought learning to vinyl wrap would be cool, this is the only useful video I have found that is straight to the point an simple. Thanks!
The only video on CZcams that’s quick, to the point, and very informative. Can’t wait to start my project.
You all did an amazing job With this video. Very thorough but straight to the point.
Been watching many different videos from different CZcams channels... This so far has been the most straight forward video... Many others including ck wraps just dont have the true teaching talent. You know what your going to say and keep it simple... Great video.
Short and sweet! No extra BS at all! 👍👍
Ok, this is the best way to put on wrap on the hood out of all other videos in youtube out there. Thanks.
I've watched a lot of videos on this...this was simple and had a lot of good detail tips. Thanks!
Wow amazing work you guys did great !!! Cant wait to try it myself
Excellent video straight to the point, great job
Nice video,direct to the point. Worth the 7 mins
Straight to the point love it!
Great vid guys! Good production, clear instruction, and to the point. Nice job!
Nothing but happen! Excellent video and I got more out of this than most of the others. 👍🏻
Really great video! I would advise steering your clients towards satin black instead of matte black. It's much easier to maintain and clean. It's also a deeper black with a nice sheen that will maintain the appearance of the car's body lines 🤙
A very good video on wrapping a hood. I shall study this and try to remember all I have seen. Thanks again, guys.
Love the content!
Nicely done fellas I really appreciate this video
Good job! I appreciate the detail in your video.
Amazing video. I want to DIY my tesla model 3 hood soon. This video is going to help me so much. Thanks guys. You’re amazing.
Thanks for the video. It was super informative
perfect bro thank you im going to try to wrap my hood this weekend wish me luck !!
Excellent demistration! Great job...Guys!
Awesome video sir, helped a lot can you please make a video on how to wrap rear and front bumpers, which have a lot of angles
super nice tutorial
REALLY GOOD AND USEFUL
I m going to try it thanks for the video
U guys make it look so easy haha I’m struggling so bad
Great video thank you
Damn!! Made me feel prepped 2 go & do my own!! Thx u 🎉
Outstanding. Thank you.
you guys are the BEST, Chicago auto PROS.
You make this look so easy. Lol. I am about to wrap my ram diesel truck. Hope it goes just like your video.
Perfecto 👌🏽 gracias
Good Job! ‘Liked” it 👍😏
Best video on how to do this on you tube thank you!! Ima save myself the money and wrap my hood the clear coat is coming off the middle of my hood man and I’m not paying over 1,000 is the quotes for my hood nah ima do it myself thank you sir!!!!🎉❤
Did you end up doing it? The clear coat is coming off my hood too and I'm also considering wrapping it. But wondering if the surface imperfections will show through the wrap..
Great job
Thank you bro for this
Hell yeah I wanna do this
I have that same Porter heat gun. What temp do you set yours at for that last part of the process?
The genesis bumper just vibing in the background
Appreciate it this brother
I wanted to see the full application of the relax on the curve.
What wrap did you use? What make? Any from this manufacturer to avoid?
Fantastic
awesome man thankd.
Thanks brother.
nice tutorial. 👍
Very good tutorial Bro.
Thank you.
What do you guys use to keep the hood and trunk propped up a bit while you wrapor do you wrap these things while they are closed? Also how long do you recommend letting it sit before getting it washed etc?
You guys are badass
Thank you. How about adding a tutorial for a two color wrap,for example a red cover with two white sporty stripes
Good deal guys, thanks!
Hey guys. John here. Fantastic video! Question: I have a 2021 Toyota C-HR. The color is Bronze Oxide. I have been thinking about wrapping only my hood on this car. If you had to choose, what color wrap do you think would look good with the Bronze Oxide of the car?
Thanks buddy
Good job ...thanks for the good info
can you advice wrap a hood with alot if air spots chipping ..would it look at least 75% good I amnot askingfor pefect ..
Thank you
well done.
Do front fascia. I’m planing on wrapping my hood and front fascia.
I want to wrap my hood roof and trunk on 2017 Civic Coupe. It's black but want those 3 peices satin white chameleon. How wide wad your roll (5ft)? You made that look so easy which I'm sure it's not. Do you recommend a cleaning solution to wash before install or just soap n water then rinse and dry? Last question if tiny bubbles don't come out can you poke then with a small pin to get air out?
Thanks
Will be my first time trying to wrap. Great video thanks
I have a new 2022 ford bronco and live in Puerto Rico, the sun is blistering . What product would you recommend I wrap my hood with that is the most UV resistant and not damaging to the factory paint.
Nice vid! Just wondering if you can still install a vinyl wrap if the hood has some very tiny paint chips..
You made it look easy, Vinyl wrap does not require the soap solution like PPF? Curious, as a DIY project how many times would a first timer have to start all over on a typical hood? Front ends look to the the worst!
You're going to fail the first time... trust me. But after the first time you'll learn that stretching that bad boy first is the way to go.
Thanks for posting. Question, have you done a C6 corvette. The rear bumper looks tricky. Thanks buddy
What is recommended when the hood clear is faded? Should I sand it a bit with a fine sand paper?
Similar to paint. The smoother and more even the surface, the better the film will stick. On a shot hood I'd sand and primer.
I love it. Wouldn't think there is too many options for gloss black. Well, there isn't, except matte. gray would work too. But a lot of ppl will be asking why did you forget to paint your hood. Many ppl don't like matte or even satin, it looks like primer for paint. I couldn't disagree more. Would love to matte/satin wrap a car. Wonder if roof would look good as well, I'm guessing yes.
Nice
Hellon. At what temperature you use the heat gun
Why don't you use the spray on the hood and Squeegee the spray out or is that not recommended? I've never done a hood but I've done several signs and I used the spray, just curious
I plan to wrap my wife's hood soon. The clear coat is somewhat flakey and I want the wrap to come out nice. Do I need to sand the clear coat completely off?
Thx 🤘🏼😎
What was the length of time from start to finish. The holds for the windshield fluid that hits the front window. How do you cut that? How long with the wrap last.
Is it detrimental to clamber? My vehicles is pretty new, no scuffs or dents can I get away with just a nice wash of the hood?
Will it still stick if there is a little rust on the lip under the hood
Dumb question. I bought some vinyl on Amazon it’s gloss black and has a thin film on the outside do I leave the film on til after I’m done wrapping?
Do you want to heat the whole hood afterwards to get the vinyl glue to stick better or just the edges?
Do you have to spray the surface with water first ?
21 here, I have a ultra white Toyota, any opinions on if I should do hood flat black or white? It's a '10 matrix s and has a big scratch I want to cover, also what should I do with the hood ornament?
For old cars with window washer nozzles, do you need to remove it before the wrap?
Is it possible to get a good start with laying it down on a hood if you're alone, or do you have to have another human to help? 😬 Also, I'm very short, so any tips or advice would be great as this is my first time messing with vinyl and I'm restoring a 2006 mustang... 👍
What material is good and okay to use and what material is not good like I'm looking on eBay for a carbon fiber 4 or 5 D and it looks mostly interior with a sticky back but I'm not quite sure this is going to be a first time for me
Nice.
I wish just one of these Hood DIY videos would say something along the lines of if you get to the last corner and you have too much material bunched up you have done this wrong because that's what happened to me the first time and I'm not sure what I did wrong because none of these videos explain what it means if I have too much material bunched up at the end
How long does this last? And cant it be washed without damaging it?
How long with good care on average that would last? Could u make one with the clear bra? Chicago Auto Pros puts the best vids on you tube.
The ViVViD wraps have a 5 year warranty
It last for a very long time. Lol I mean it’s not gonna come off once it’s on if done right. The worst happens is 1. It can get chipy if you try to take it off years later it will be hard Getting it off. 2 it can get dirty of course but you can easily buy cleaning products made especially for wraps.
Can I put vinyl flame decals on top of my vinyl hood wrap? Will it stick? I just want to add another dimension to the hood with a complimentary color flame...Thx
Haven't spoke to wrap a hood in Atlanta braves wrap on a van
Why would someone wrap a glossy black to a matte black ?? It looks like the clear is fading... but ig if you want to waste money that's a way to do it
Lmao! No.
helpful...
I watch this thinking... "How easy. I'll do that." The result ends up looking like a tramp's raincoat! 🤣🤣🤣🤣
So the lip that fold under slightly round the back is enough to hold its grip on the edge and not peel off?
Hi what’s size of carbon fiber is this is it 10x5 ft??
How would it cost me to donthe hood and the roof and deck lid of a Kia Optima 2013 and can I buy it from you?
Should I "glass" a 1996 Corvette hood. It has a shallow, central hood scoop.
really nice! would i do it "NO" pass to you pro's. Thankx for showing your work, knowing be done right!
Great video to get a person started, but that mat black looks like an after market hood. I'm 51, a different era than people younger than me, and another color would have been better, but everybody has their own like. God bless y'all, and thanks.
This may seem like a strange question but can I just buy clear matte vinyl anywhere?
Where do you get the wrap from
Having watched this vid 3 times I thought I'd have a go.
All I can say is it looks easy, my attempt was a nightmare. There was nowhere near the stretch in my vinyl.
Gave up after 90 mins.
Is it the same for a fiberglass hood ?