Showing A Beginner How To Vinyl Wrap A Roof
Vložit
- čas přidán 16. 03. 2017
- In this video we're using Avery Dennison Satin black
Sign up at www.ckwraps.com/ for EXCLUSIVE content and access to our location and discussion forums! - Auta a dopravní prostředky
I greatly respect the fact that u let a beginner wrap with u on the channel
Shows a lot about your personality and it does help other beginners
you guys are honestly the most helpful wrapping channel ive seen so far, so clear and informative. Thank you for this tutorial so helpful
yeesssss
0
Your videos are awesome dude. Never knew what car wrapping was until my cousin contacted me about a month ago asking if I want to work for him. So far has been a trial and error but you are a savior.
I love watching your videos out of order and seeing you look completely different in every one.
Love how the video is showing me (a beginner) how to vynil wrap my same exact car
Best roof wrap I've seen so far. Answered all my questions.
I wrapped the roof of my 2017 Mustang earlier this week and this video really helped me a lot. You aren't lying about Avery.... I originally tried to wrap it with 3M 1080 and it had all the crappy issues you described in your video where you did the yellow on the hood of the Ferrari... second time around I used Avery 900 gloss black, not a single bubble nor wrinkle. Thanks for putting all the effort into these videos, they're really helpful!
is it gonna be doable by myself? I wanna wrap my roof and the side pillars and the side mirrors of my camry. and the only professional place in our area for this is asking 500 dollars for this. so stupid.
Yeah I just tried to wrap my targa top on my corvette and failed miserably and wasted $30 of 3m wrap
@@lsedanolg its all patience and learning... I got a stretch mark, few glue lines and actually burned a hole first time doing a hood. Spent 10 hours getting the first mirror done with its angles. Rear trim piece i did 3 times to get it right since it wanted to bubble up around center emblem area (high tension zone). After that things started getting easier learning how to make relief cuts where needed and learning the angles. Its not something you really get first time. Ive only worked with vvivid, so the easier film used starting out is best.
Learned from my mistakes.. we were pulling too much out doing the hood. Need to just lay it flat and let things fold over edges
I want to wrap my suv, is this wrap good for learning to wrap? I dont want to feel like I'm wasting $.
@@droy7101 that’s cheap… places charge 2800$
It was great to see a student showing your teachings. Great content man
I gotta tell you man I really appreciate your videos as I'm gonna wrap my car with Avery Rising Sun next year. Great commentary while doing fantastic job at the same time. Keep it up!
Amazing job, I did blacked out my chrome trine and I have you to thank.
Nice work brother. The fact that you're filming too! I wish I had the time and patience in my life to wrap our cars. Thanks!
Dude, your such a good teacher/mentor... good job man. Hope your business is going well, really admire your work ethic.
I've learned how to rap from watching your videos. I did my first rap yesterday. I rapped my mirrors and the door handles on the right side. I couldn't even finish the left side the same day. Rapping takes a long time and it's a workout. Gezzz☝🏽
All your video's are GREAT ....Thank you for showing us how to do it too ....
You can also spray the vinyl with water to help you identify where you have already squeegeed
Its looks so easy! I'm gonna to wrap my car for the very first time. Thaks for your videos. They are very helpful and clear. Greetings from Mexico!
You guys do such an amazing job. Attention to detail is phenomenal. It's the little details that impress the hell out of me.
Thank you
Thanks for allowing apprentice to do this. As a novice myself this video is totally relevant to a first timer.. I just picked up Hyundai Elantra N-Line and think it will be a challenge for me with the shark antenna and sun roof.
GREAT JOB Andrew and under pressure ,,Sounds like a Very Good Teacher Also
Well Done Guys
Good narration - good teaching - triangle was a neato trick. Thanks - I am going have go at this with my nephew's car as I feel more confident after watching this. Have a nice day. CHEERS from AUSTRALIA.
Thank you!!! I was thinking about going with vivid but I'm glad to see other options are just as viable! ✌
Andrew did a great job on that.. some great tips also.. thinking about doing my mirrors and roof now..
Thank you for all your videos. The more I watch your channel the more confident I get in wrapping my car.
good luck Andrew. You're in a great learning position!
Keep up the awesome work I look forward to checking out your program very interested in wrapping my own vehicles . Stay blessed
Great video! Helped me out a lot! already messed it up once today but this makes it look easy! I already bought more to redo it lol
Very informative and helpful.
Thanks
Planning on doing a diy wrap to the roof of my Altima. This video was great and really gave me some good insight as to how to go about it. Really liked how easy the Avery went on so I think I'm going to go that route!
Thank you for the video! I never wrapped a roof before and with your tutorial my roof turned out flawless!! I followed everything to a tee, same viynl, steps and tools and all by myself!
David Eich where did you order the vinyl from?
@@marvinramirez2366 its Vivvid vinyl
I need my roof wrapped 😢
how was the vinyl roof wrap? did it stay the 5+ years?
About to go on my own wrapping adventure with my 2007 Mitsubishi Galant. These videos have given me the confidence to do it myself. Thanks for all the great tips and tricks and detailed explanations of everything. Keep up the awesome work!
How did it go ?
@@Rossvallance a few mistakes here and there but man I love it. Did it in a rock gray. Car looks great.
@alangarcia what vinyl you use?
@@sapphirekeyes2042 i used avery dennison in rock gray
I like that you rarely cut or edit videos. Gives me an idea of how long it'll take in real time
This is really "WOW" - great, super - well done
really good video, really appreciate it. thank you!
Good job guys,
I like how to wrapping the cars also how you make it easier to us.
Good luck guys
Just did the roof of my 02 bugeye wrx. Vivid matte metallic purple. Very fun to work with. Very high tech stuff. Had alot of fun. Didn't consider it work at all. Would love to wrap for a living.
I would also advise you guys to spray just some water on the top of film once it is laid so that when you squeegee the vinyl, you know where you have done it and where you have not and it also prevents to scratch any gloss black or satin black film. I have particularly noticed these mistakes in high end shops as well
I have had 99% success doing this so would request you to try this method out
Ohh so that’s what the soapy water is for. Thank you for the tip.
Awesome
well explained, well displayed ,well executed.
Well impressed tbf 🙌🏻
All the daft videos I watched before this one 😡😡🤣😂
Im glad i found this video i gotta wrap my genny roof tomorrow and this made my day thank you for this
One thing I have noticed is that all the beginners are doing when they finish cutting a piece of vinyl is they rush with the cut at the end, like at least twice as fast as they were cutting it before reaching the end. Instead, look at CK, at the end he finish his cutting keeping the same speed.
The reason for that is that the chances of your blade to jump and cutting on the paint are very, very high. I know this from self experience and I have seen others doing the same thing 😄
So take your time and don't rush, because you can ruin your nice job,right at the end of it.
Wish this also included the actual roof rack portion removal and wrap. Good video very informative
Super clean🙌🏾🔥
Well done, great video 👍👍👍👍👍
that was a very nice and helpful video.... thank you guys....
First off thanks for your videos! Ive done some small wrap projects and Im about to tackle a roof for the first time. Im looking at my car and both the front and back windows of the 3series BMW have no rubber in-between the glass and paint. There is a somewhat large gap so I'm wondering if you have any pointers on how to finish the front and back without exposing any paint. Thanks!
Explained perfect enjoyed every minute really has helped me out on wrapping my own car now A1 5*****
Bro your just a master can you watch your videos for hour to learn new skills keep up your brilliant work can wait to wrap my Acura TL👍
Always the professional!!
thats clean bro...
Excellent video....very imformative
Another awesome video, thank you, you're a great teacher!
What is the vivid satin grey colour on the sides? Do you still recommend it? Thanks
Thank you for the window trim tricks.
Nice clean work.
Thank you, great explanation. Do you not need to go around the edges with a heat gun?
Le quiero dar las gracias a Ck, vi varios de sus videos pude colocar el vinilo en el echo de mi coche, al 2do intento quedo bastante aceptable pero.....
Parece muy fácil pero no lo es.., a ellos si, son profesionales, incluso el chico que forra ese techo. pero no crean que a Uds. les va a salir igual... una idea es usar agua jabonosa, como cuando se instalan las laminas para oscurecer los cristales. una cosa que yo hice fue dividir la lamina en dos mitades y así fue menos traumática la experiencia. Lo otro que es un mito es que Uds. van a poder usar el cutter como ellos, tiene practica que les da la facilidad de cortes rectos y parejos . Otro concejo, cuando Uds. se dispongan a probar por 1ra y/o 2da vez, contar con el doble del material (vinilo) del que se necesita, probablemente tendrán que hacerlo dos veces.
Una cosa si es cierta, el uso de la pistola de calor es fundamental para quitar las arrugas que se les van hacer en el vinilo además para vencer la memoria del material pegarlo a superficies difíciles, ángulos, curvas, convexidades, concavidades y un largo etc.
Para terminar me hubiese gustado que explicara como quito la antena alea de tiburón así hacerme mas fácil la vida
Great job guys! Definitely informative. For the vinyl that the first guy squeegeed down, between the front of the windshield towards the rear windshield.. Was the vinyl heat shrinked to make the edges straight after being cut?
Thank you guys 🤙🏻
Goood help thanks from México
does this protect the paint underneath from uv damage?
Man I just tried to wrap my roof and it was a disaster. I'm going to try this method. This makes more sense
That is dope thanks for this I been wanting to try on my altima but don't know were to start lol
Very informative channel with good explanation. Is there a link where I can get this vinyl?
cool man....awesome job..
Please can you tell me how to tackle the roof of the latest edition Toyota RAV4 (2019 onwards).
The rear of the roof has some raised (moulded) areas, meaning it’s not an entirely flat surface.
I’m unsure if you need to start with the raised areas and work outwards, or the other way round?
Thanks!
Great video..nice job..
What's the purpose of that blue masking tape on both front and rear windshield...?
Is the wrap safe going through automatic car wash brush? Will it worn out the paint wrap over time?
👍 Great video!
Great Videos like always, Thanks, I have a Corvette hatchback so I can remove the top. Is it better to wrap the top on the car or off the car?Thanks for all the great tips, Oh Ya on Corvette it's Fiberglass so NO MAGNETS LOL!Steve
If anyone is watching this and thinking about using Vivvid, be warned! Vivvid will not pull tight and smooth like the Avery in this video! Get the Avery and do it stress-free the first time.
Maybe vivvid is a good product for other applications (smaller areas/less curvature), but for my roof it was a nightmare to work with!
If you have a sunroof do you open it up and proceed like this ? Or do you keep the sunroof closed and try to tuck around the weather seal ?
Like the way u break it down no bs 🤣 keep up the gud wrk 👍
Curious to know if the rumour about vvivid vinyl curing to paint and being virtually impossible to remove being true in your experience? Avery looks really user friendly for a noob like me. I'm intrigued to try it. Excellent video.
I'm gonna do this tomorrow. Thank you
Great Job!
excellent video! very clear and concise. I have one question, I would like to wrap my roof, but the clear coat on my rood has began to peel, should I sand and feather out the clear before applying the wrap? thanks
I 2nd this question- hopefully someone drops an answer
Thank you for your video I was all excited saying I could do that then I remembered I have a sunroof lol lol
Do you have more videos vynil wrapping other parts of the Genesis coupe?
great work! I have a Lotus which has a composite body, what do you use instead of a magnet?
Damn these guys are good!
Hi when I put my roof molding back, it doesn't flush like how it was before the roof wrap, is that a big deal? Just worried the rain may seep in .
What do you do if the car has an aerial remove the headlining?
What is the room temp when you're putting this down?
That is a good head of hair my man!!
Should I use heat if I’m using VIVVID carbon fiber vynil? Also when and where should I apply the heat?
Wish I could post a pic. I was at a dealer the other day and you should see the crap wrap job they did on a brand new car. It was like the roof and the mirrors and there were cut marks and white paint showing on the edges where they didn’t tuck on the mirrors. Was pretty sad that I noticed it being I’ve never wrapped a car but I’ve watched a shit load of videos. Can’t wait to wrap my first car. I’m looking to buy a 350z so that will probably be my first wrap. Great videos I’ve learned a lot.
Doing this today with hi gloss black from vivid on my Cruze. The hardest part seems like it’s taking the shark fin antenna off. Started carrying kayaks and I don’t want the roof racks and straps etc damaging the actual paint. Thanks for the vid!!
If you’re doing vivid , don’t peel off the whole sheet like these guys did. Vivid is super sticky and is a lot harder to pull off. I will be trying Avery next time for sure
What was the blue tape for?
Think I can do a gd job wrapping my vauxhall astra from white to metallic purple after watching yr vids...wheres best to order fromthats not to expensive and delivers to ire ?
Man that material is so easy!!
I'm thinking about wrapping my Audi S5 roof but it has a glass roof in the middle. Is it better to lay wrap over the entire roof and then cut it for the glass, or just wrap the section in front of the glass and then wrap the section behind the glass?
I'm sorry if I sound dumb but I'm still a tiny bit confused on bridging the gap. Do you just leave a tiny gap between the 2 parts?
would vinyl wrap seal a leaky sunroof if i wrapped the whole roof and didnt make a cutout for the sunroof?
Would love to see a wrap of the C6 Corvette halo pilar. The center is an inlay and the edges have a compound curve wich tends to pull the wrap out of the inlay.
Great job guys..., what would be a price to have the hood wrap with a sun roof, If you can elaborate...
Hello my roof is a mess and I want to do a wrap. I don’t have a job and want to save money. I was wondering what kind of glue or anything for this to work on Avery wrap. Please advise and also I have fading roof I own a Honda Pilot. Please provide product information to start of thank you very much love your videos
@ckwraps is the honda civic brand new sharkfin easy to remove like toyota?
Hey man anyway you could show a car with a sunroof? This was perfect for me cause I have a bk2 genny but I realized at 22mjns this one has no sun roof so I’m not sure what to do at that part, comment back if it’s just a simple cut out around in with an extra 1/8th inch to tuck ? Going to order and try it next week. Where is your shop?
Can I put vinyl wrap over a paint that has a satin finish instead of a glossy one?
What material that triangle is made off? First time I'm seeing this..look useful
This video is awesome (thank you). What kind of magnets are you using to help hold the wrap in place until you get it secured?
Good camera work
I have an F-150 platinum I want to wrap the roof on. My rain gutters are painted to match the roof. How do you guys address that? Do you remove and wrap separately or do you leave them in place and try to tuck the film somehow? Thanks