2018 Ram 2500 promaster ac or blower motor dont work check the fuse

Sdílet
Vložit
  • čas přidán 13. 06. 2021
  • Due to factors beyond the control of RB The Mechanic, it cannot guarantee against unauthorized modifications of this information. RB The Mechanic assumes no liability for property damages or injury incurred as a result of any of the information contained in this video. RB The Mechanic recommends to follow safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of RB The Mechanic, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not RB The Mechanic.
    RB The Mechanic. All rights reserved. Publication, reproduction or distribution of this or any video by any means whatsoever, including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world, is strictly prohibited without the prior written consent of RB The Mechanic.
    #rampromasteracfuse #ram2500promasteracfuse #ramacfuse #promasteracfuse #whereisthefuseonram2500 3ram2500 #acdontworkonram2500 #ram2500acblowloermotorfuse #blowermotorfuse #2016rampromasteracfuse #ram2500fuselocations
  • Auta a dopravní prostředky

Komentáře • 38

  • @sportnik23
    @sportnik23 Před rokem +1

    Can you tell me how to remove the relays? I've tried by hand and with a pliers and only succeeded in pulling the red cap off.

  • @zaynehm2444
    @zaynehm2444 Před 2 lety +1

    I got 2021 promaster for my fleet and I put a camera on then the blower motor stopped working , I tested the blower separate and it's working, now I think the switch is not working but there js lighg on it , no power to the power motor , any info about it

    • @RBTheMechanic
      @RBTheMechanic  Před 2 lety

      Check fuses and relays

    • @zaynehm2444
      @zaynehm2444 Před 2 lety +1

      @@RBTheMechanic the problem I did check all of them , I checked the blower then I used my autel im608 to test the switch and they're fine , the code that I got B1919-14 front blower regulator (linear driving) circuit open or short to ground .

    • @RBTheMechanic
      @RBTheMechanic  Před 2 lety

      @@zaynehm2444 u might have electrical trouble might need some diagrams and good Electricison might not wanna tackle this one urself

    • @zaynehm2444
      @zaynehm2444 Před 2 lety +1

      @@RBTheMechanic I took it to the dealer and they said it needs ecu refresh cuz of the intelligent fuse box lol it didn't work ,well I used an old school way and I fixed it ,it took me 3 weeks 😅

    • @RBTheMechanic
      @RBTheMechanic  Před 2 lety +1

      @@zaynehm2444 dealer always give BS

  • @JKLOPQ
    @JKLOPQ Před 2 lety

    Could "no heat" be connected to blower fuses/relay or that's something else?

    • @RBTheMechanic
      @RBTheMechanic  Před 2 lety

      No heat or no air at all?

    • @JKLOPQ
      @JKLOPQ Před 2 lety +1

      @@RBTheMechanic no heat. AC at 1st too, but switched 7.5 fuses & it started working.

    • @RBTheMechanic
      @RBTheMechanic  Před 2 lety

      @@JKLOPQ check to see if bled door is working

    • @JKLOPQ
      @JKLOPQ Před 2 lety +1

      @@RBTheMechanic I forgot to add the white plastic lever above the gas pedal is not moving at all when I shift the temperature. I tapped it with a screwdriver few times, but it didn't fix it so was wondering if fuses/overlays have anything to do with it & if not then what do you think it could be? Faulty blend door motor?

    • @RBTheMechanic
      @RBTheMechanic  Před 2 lety +1

      @@JKLOPQ if that’s the blend door motor then that’s the issue I don’t have too much software data on this truck but u can manually try moving it and see if that works

  • @littleche7676
    @littleche7676 Před 3 lety +1

    Hi. My 2015 promster ac just stop working. No light on the swiches or anything else. Looks like its dead. Not. Blowing air at all. When u ouch the middle one for AC that light not coming in. What u think my problem is ? Thx in advance

    • @RBTheMechanic
      @RBTheMechanic  Před 3 lety +1

      Start with fuses check the fuses

    • @littleche7676
      @littleche7676 Před 3 lety +1

      @@RBTheMechanic I tested as I see in your video its seems all good. Also when is the headlight is one I dont see any lights on manual climate controls...

    • @RBTheMechanic
      @RBTheMechanic  Před 3 lety +1

      @@littleche7676 check all other fuses there’s also fuses inside left side lower steering there’s screw u remove and take out the cover and fuses are inside also on the wall back on passenger seat

    • @littleche7676
      @littleche7676 Před 3 lety +1

      @@RBTheMechanic Ooo ok I didnt know other fuse boxes. I will check it. Thank you for your help.

    • @littleche7676
      @littleche7676 Před 3 lety +1

      @@RBTheMechanic also i see this.mor ing my odometer is in the dash blinking. İs this something related with climate control panel?.maybe computer problem?

  • @lmaojasey921
    @lmaojasey921 Před rokem +1

    I have a 2016 Dodge Ram 2500 Promaster. The AC doesn't work! Not sure whats the problem but from what I know, the driver side dash, where it shows the outside temperature has no digits. Before when the thermostat showed numbers, the AC would blow COLD air, but now no numbers show on the thermostat, therefore, no COLD air coming out from the AC. The AC button lights up itself, just no COLD air! What would you say the problem is? Im thinking a fuse maybe, not sure if that's the case! The whole AC system works, just no COLD air because of the thermostat showing no digits!
    Any help from anyone would be great, TIA
    @RBTHEMECHANIC

    • @RBTheMechanic
      @RBTheMechanic  Před rokem

      Check fuses to start

    • @lmaojasey921
      @lmaojasey921 Před rokem +1

      @@RBTheMechanic should i just replace all the AC fuses?

    • @lmaojasey921
      @lmaojasey921 Před rokem +1

      I watched another video and I they stated that it was the thermostat sensor on the driver side mirror. That sensor isn't working from what I know, because it isn't showing any digits or numbers on the drivers dash. No outside temperature, just empty lines. When there was numbers, the AC worked! So should I just swap the thermostat sensor first? TIA!

    • @RBTheMechanic
      @RBTheMechanic  Před rokem

      @@lmaojasey921 yeah fix that u never j own it needs tem reading to keep temp in range

    • @RBTheMechanic
      @RBTheMechanic  Před rokem

      @@lmaojasey921 not replace check them with test light