$300 CHINESE PAINT BOOTH VS $30,000 NISSAN GTR
Vložit
- čas přidán 6. 09. 2024
- To grab a Yfood taster pack with 10% exclusive discount click here USE CODE "MAT-CZcams" bit.ly/yfood_m...
I bought a £300 inflatable paintbooth from facebook marketplace to attempt to paint my wrecked Nissan GTR R35 that i bought from auction & rebuilt in 24hours. But it wasnt as easy i thought.
Thanks to - www.facebook.c...
THANKS TO THE ICE BLASTERS -
www.iceblaster...
FOR CARBON FIBRE GTR PARTS -
www.knightrace...
👇 FOR MORE CONTENT CHECK OUT MY SECOND CHANNEL 👇
/ @matarmstrongmk2
⬇️ ALL MA MERCHANDISE ⬇️
matarmstrong.c...
⬇️ Follow Me Here Aswell ⬇️
/ matarmstrongbmx
/ matarmstrongbmx
I'm going to paint my P1 during a hurricane to show you how it's done
😂😂😂 your P1 has had bad experiences with hurricanes. So I’d advise you didn’t
Need to finish it first Freddy! 😂
Hes thinking the salt will key it in for him save on prep 😅😅@MatArmstrongbmx
Freddyyyyy give Mat a slap for not wearing ppe cutting the carbon fibre, more deadlier than paint and wears a paint mask 😂. We all done stupid sh^t but seeing as you guys inspired me to chase my dream be nice if ya stuck around 😅
Dead for days😂😂😂😂😂 it seems to be a race between Jack and you,you guys are truly building dreams ❤
34:50 Mat I'm really concerned whenever you chop off carbon fibre without any protective mask. Its REALLY BAD for your lungs!!! Health should be your No.1 priority cause I really want to watch your videos for a long time!! Lots of love from S.Korea❤❤
Was going to post this same thing .. can't stress this is enough!!
This comment needs to be seen!
yeah, also when he cut the mclaren carbon 😢
I've left comments about it multiple times - he keeps doing it...
Came here to post this, FFP3 needed
*gets underside ice cleaned to perfection*
*immediately tears it through a field*
Mat's not the sharpest tool in the shed.
I disliked for this reason... totally ruined the video.
💀 I know right?
@@mobrien11how did it totally ruin the video. Matt does with his car and money ow he wishes lol 😂.
@@guitarrise4523 I do with my reviews and viewership "ow I wishes." And for the record, the video ended with me being totally annoyed with a sparkling clean car being "tested" by drifting it through a dirty field?? Who tests a GTR on it's offroad worthiness??? I was annoyed, left the channel, and gave it a thumbs down.
🤣 love it when Freddy just turning up for couple of second then disappears 🤣
😂I think he lives in English now....
@@menzimabuza1746I think you need to go live in English too so you can improve your England 😂
And as for Freddy, that P1 isn't going to build itself
@@JamarRosalesmost likely autocorrect
Maybe England gets to keep one American per year and Freddy is trapped. Reserved to his fate of showing up periodically in every Matt Armstrong video.
@@Imagine.11 Probably but I won't ignore a golden opportunity 😁
I owne a paint spraying business and people question our prices. Matt just proved if you go out and purchase all the equipment to do it yourself going to cost an absolute fortune. We spread the costs over years. Also preparing and painting a car is a real skill built over years. Had customers try it botch it and costs them more as we have to remove the mess they did and start all over again.
Body and paint work will always be the most expensive. Even if you do all the body work it still has to be painted. Wish i would of got into it bc with insurance work you will always have a job.
The pay on the trade is shit though, I was I did something else
@@seanfox4551Agree with this, body work/painting is tough work. Wanna look like your 80 when you turn 50? Try this amazing career path!
Absolutely agree. Paint is for the Pro's...👍💪
Any recommendations for proper bench jig work and panel work please?
Can I just say as a ex painter, how nice it is to watch someone who hasn't done any painting themselves to do the process themselves, the Right process for that kind of job aswell! And genuinely take on board what they are being told or shown!? Amazing first attempt Matt! Smashing it mate, keep it up!! 🤙🤙
Thanks mate
🤮
10:42 never heard the gang laugh that hard before 😂😂😂
thanks for the support, i guess 😂 ive never got this many likes 😊
That was killer funny and laugher is the best medicine, it was awesome to see them try and do that at home.
lol, sounded like a gaggle of turkeys 🤣
I love the fact that Mat doesn't hide his mistakes. Loads of CZcamsrs edit the video to make everything look perfect... Keeping it real is the reason we all love Mat so much. Great video, and the car is top-notch 👌
😂😂😂 clearly your a new subscriber 😂😂 guess you didn't see the merc video which now has been deleted showing the bad things he did
@@DanielWoolley What? I've been a subscriber since the S5 days... What are you going on about?
@Bzrking_hound exactly he deleted a video you've never seen matt isn't the person you think he is
i know what he is... look at his profile picture, a bmx rider that's full of himself 😂 @DanielWoolley
@@DanielWoolley Everyone is gonna try hiding something but guy isn't wrong he shows wayyyyyy more mistakes than any car CZcams'r I have seen.
I am not a car enthusiast and have never ever watched car related videos on CZcams. But since I've found Mat, his Dad and his crew, I can't get enough. Thank you guys for entertaining me with your crazy humour and interesting and creative videos. Keep up the excellent work.
Other ppl facing problems " what do I do😥"
Matt: 😂😂😂😂😂
got it from his father lol
And that is reason why he is my inspiration :D
Tavarish is the CZcams equivalent to Stan Lee in marvel he’s just making appearances in everyone’s videos 🤣🤣
The amount of work for painting is nuts.. Looks so good now though.
Matt is the type of car enthusiast you wanna have on your team in zombie apocalypse
What
bot ahh comment
*Escaping zombies in a car put together by Mat and his Dad*
Mat: "Did you forget to connect the coolant pump?"
Dad: I thought you were gonna do it
*The car overheating with zombies on our butt*
Us (>_>) (
Nah mate, most of his cars have 2 seats, I'm sure he'd choose his missus over me
Award 🥇 for most 2012 comment
Love the vibe of ice blasting a GTR clean and repainting and within the same video just ripping through fields slamming mud and stones all up the sides 😂
KEVIN IS GOIN NUTS AT THAT TREE😭😭
@@martinmar555 he doesn't care for the gardener so he took matters in his own hands
I had a pit who would tear off any low hanging branches (after literally hanging on the tree by his teeth). Saved us the effort of having to trim them. RIP Maximus
@@digestiveleaf 😂😂
@@digestiveleaf the boy's digesting leaves
On instagram I saw that kevin did that all day😂😂
Being able to actually rebuild a car is a wonderful thing. Something that in Portugal is impossible because of the laws. But believe me, it's something I would love to be able to do one day. I love opening the engine of my Citroen Xsara and changing the belt, changing the brakes, anything I can do, I do it even without training in the area. I'm IT.... So seeing your work and your videos is something that makes me realize a dream and makes me happier. Thank you very much. And that GTR... One of my dream cars. Thanks
Surely you're allowed to wrench on your own car, but there's strict customizing laws ?
@@appelflapdrol Yes in Portugal tunning and car alterations are not allowed, anything that change the motor chassy wings etc need to present to get a special permition and have to be approved. Of corse you can make them and not approve them, but if the police stop you and check that is not correct, your car is appreended and a lot to pay then...
@gueifaopedro dang, man, that sucks. Only place here like that is California , but its not not that bad.
Was amazed at all the dirt under the car...
Watched Mat blast this thing around in a grassy field.
1st owner took the same enjoyment.
These challenge style videos are so fun and refreshing, I will never get sick of your classic videos, but these are such a nice break of pace. Love it.
You’re such an entertaining CZcamsr. 3 years back, I was in the hospital for a long surgery I had. It was my first surgery and I was 11 at the time. After my surgery, when I became conscious, I watched a video of you buying a body kit for your gt86 and it helped me stay calm
Everyone ranting and raving about Mat's skill and vibe. I wholeheartedly agree. But a massive shout out to Matt the cameraman! He's my absolute favourite, and the unsung hero of the channel! Always a good video when Matt the cameraman is on the vid! Keep up the good work lads!
Mat is living proof that if you love something and devote your life to it, you don’t need a formal education in whatever it is to be successful. Smashed it, loved watching this channel grow over the years.
To play devil's advocate, that's only partly true. A formal education guarantees nothing, but it does absolutely raise your ceiling.
@@kieranmcmahon1745 definitely not smearing a formal education, I’m saying people don’t need one to be successful. "A jack of all trades is a master of none, but oftentimes better than a master of one."
@@jthftbl Ah sorry, I misinterpreted what you meant. Indeed so. An education isn't the only way to love a solid, happy and comfortable life.
@@jthftblwhy don't we kn😢 what we love to do?
@@kieranmcmahon1745 no worries brother, I agree too
Hi Matt, bodyshop owner here.
The black charcoal “thing” is called a guide coat, as it guide you to where you should sand the panel.
Really love your videos by the way.
If you knew what you were doing - you wouldn’t need it. I do everything by eye.
fully detailed the underbody and the first thing he does... hoons the car in the backyard hahah
Serious face palm moment
Mat is a special character🤣
And that bow in the new rear diffuser will be full of grass now
Bruh breathing in carbon fiber dust 💀
💀☠️
He cut the under tray not the diffuser lmao
@@eduardoserranoaldana3688 the undertray was made of carbon too
@@eduardoserranoaldana3688The fact that you put that “lmao” at the end of your comment so confidently, yet the under tray was also carbon fiber. LMAO.
That's exactly what I was thinking in that moment 😢
i love the fact that dad is there with his wicked sense of humour helping his son whos excelled and made a living out of this !hobby!. great vids and down to earth always, hopefully this will continue for a loooong loooong time
Something to note, you should fully extend extension leads when pushing over 1Kw of power thru it (750w+350w), as the extension lead can overheat and melt the cable.
This is less of an issue with 230v power btw
There not allowed to sell extension cables like that here in the uk. They all have to be rated to handle way more than what there listed for to stop melting and fires ect from occuring.
Shout to Allied Automotive. Great to see the process and for helping Matt.
4:28 Kevin prepares the tree for a new color😂
Great build this one. It's shocking how expensive painting is but it's worth it when your car looks great with great paintwork. One thing i will say is if you are using the both again make sure the power extension is pulled fully out when there is a big load on it as it can act as a coil and melt the cable, had it happen to me before the wire was all stuck together. 👍🏻
One of the cleanest builds in a while and genuinely had me in stitches. Thanks.
We used one of those inflatable paint booths inside a barn. It was perfect but I admit, without the barn we would have been at the mercy of mother nature.
The airborne paint booth was amongst the funniest few minutes you have had so far. It had all the elements of a disaster movie from the moment it started to rain. 🤣😂🤣👍🏽
Freddie has entered the game........................Freddie has left the game.
@22:10 😂 had me cracking up “ omg I’m so dyslexic “ 🤣🤣🤣 those numbers will get ya! 😂
I like Freddy showing up in the videos at random. Keep up the fun Mat
Cleans off all the sand and blasts it with dirt and grass at the end 🤣 have fun Mat & team!
Nice one! Allied Automotive, It was super nice of you to help Matt and let him loan your booth, pass on some wisdom and do the clear coat. Good job Matt well done for 1st prep, prime and colour paint job. Enjoyable to watch and excellent content. Thank you once again!
I knew it - The way you & Dad Tony knocked out the paint on those boot lifters on that Rolls-Royce last time, I knew you were going to di it yourself - well done! - What a tallent! (I'll include driving as the way you can drift is just a good as Becky Evans)👍👍👍
🤣🤣🤣 : You're only ment to blow the doors off 🤣🤣🤣
11:15 in to video I was crying with Laughter cause the the blow up spray booth nearly burst!! 😭😭😭😭 Amazing video lads 🙌🏻🙌🏻🙌🏻🤣
Seriously, did you actually find that funny in any way whatsoever??
Especially to the point of crying, really?
It was definitely funny!
Even Matt and Crew found it funny. .. I was in tears myself 😂😂 it certainly WAS funny. .. almost unfortunate, but still funny!! 🤣
"Spot weld" is probably the most said words on Mat's channel 😂
What about “pyro fuse”
I love the car, but the wheels seem too plain for my taste. Japanese cars usually come with more stylish wheels. Upgrading to billet specialties or a set of weld double beadlocks could not only enhance the car's appearance but also increase its resale value. I'd like to consult a financial advisor to evaluate the cost-effectiveness of these upgrades.
Dream car coming soon
One lesson I've learnt from billionaires is to always put your money to work, and diversifying your investments. I'm planning to invest about $200k of my savings in stocks this year, and I hope I make profits.
No worries, we all start somewhere! 📈 First, grab a comfy chair and some popcorn 🍿, and dive into some beginner-friendly finance videos. Start with basics like "investing for dummies" and "how to trade stocks 101." When you're ready for more, also consider financial advisor like "MARGARET ELLEN WHITLOCK"-I came across her in a CNBC interview, she's like the Yoda of finance! May the gains be with you! 🚀💰
he chose wheels he likes! also custom wheels and beadlocks are $$ beadlocks are more for functionality tho. would be like telling him to install hoodpins
@@ElvisSirinBo Buy me a gtr, i've heard its a really good investment!
Freddy so rich now he just doing uk side quests
38:16 cameraman never dies😂
The Colour of the Porsche Is amazing.... Love It.
Man's got an aquarium 😂😂 CZcams really does pay! The size of his property is insane! Well done
Now paint the 30000 dollar GTR in a 300 dollar paint booth with a 30 dollar spray can wearing a 3 dollar mask
38:15 probably what the first owner been doing on the sand 😂
Been waiting all day for this!
This video is brilliant 😂 ⛈️
could get a big sort of weatherproof tent to put over the cheap paint booth 😂😂 was pretty good seeing that
Absolutely love it!! Fair play for having a go your self mat! Can’t wait too see this
Faster way to drop it whole in paint 😂😂
Whats this song? 37:57
The song name is act a fool by ojax but I can't find the phonk version of it
Captain Joz Personal
34:40 “we just don’t want to risk braking this defuser” because you’ve spent all your budget on M3 front splitters 🤣
Any Kenyan watching?? Hit a like
I am a kenyan
Always watching his videos.Great content
Hi
You're first mate 😂
Bud Mat now even got an expensive grass cutter
38:50 is this where all that dirt came from 👀🤣😂😂😂
27:58 „brother eww”😂
OMG Mat you had me in stitches when you guys were running around trying keep you mobile booth up. Glad ot see you got the painting done the car looks pretty cool
I've grown up in the auto body and collision repair industry and watching the stuff at the body shop was super interesting. Especially being from the US and seeing that you guys do it almost exactly the same as we do in the states. You were right to have Chris lay down the clear because as you said its very easy to mess it up. Just a tad heavy and you'll have sags (like runs but think longer horizontally than vertically) and the orange peel it hard to get right without having done it before....loads of times lol. Came out great though!
You should do another car in the blow up booth though cuz I'm pretty curious to see what sort of results you can get in there.
Also really want to try Yfood but they don't sell in the US yet :(
2:07 Like the fact that your dad is eating real food :)
hahahahahahaha, putting the blowers into the wrong holes and your reactions was bloody hilarious!
that color code is KAD (95% sure), can be absolute poison to match, so good choice blending the door and trim.
Great work on this car, was fun to watch. People always underestimate the cost of body work and paint. It doesn't take much to get over $1000 products are not cheap, and the skill has years behind it. We aren't changing brakes and oil lol
Being from Malta, It's a comforting feeling seeing UK plugs 😂
Amazing finish mat, you lot are truly motivating people like us to start our own journey on YT I’m starting myn it’s all about buying and rebuilding stuff I always wanted till I get to my dream cars and motorcycles ❤ keep up the good work!!
Amazing video again!
Can’t wait for the raffle for this one 🤞 my dream car and colour too
Totally addicted to your channel Mat!
One Pro Tip: when drilling out your spot welds, run that drill as slow as possible. This will allow the bit to grab the metal better. Cheers Mate!
Was waiting for that new splitter coming off in the field 🤣
1.3 Million views in 21 hours…HELL YEAH MATT!!!!
10:42 Anyone that says laughter isn't contagious is lying to themselves... I was crying 😂😂😂😂
😂😂
25:16 Did you assemble the door panel without the foil that was glued to the door? because if it is missing, water will get into the interior.😅
After just recently having a go at painting parts for my M4 I can vouch for you and say it's not for the faint hearted. A lot of skill is needed to tackle a job like this, nice of the bodyshop to give you a helping hand it turned out green... I mean great😮😂😂
You guys sure had fun blowing it up 😅
"Was it worth it?"
For the shot alone at 38:15 .....absolutely.
Iconic. Another banger production. Forgot to tally up the 300 pounds for the cheap inflatable paint room. But given that it being a dud saved you a MASSIVE amount of failure and potential disaster, the 300 pounds spent getting a free paint lesson from S-tier professionals paid for it tenfold. Such an amazing journey with this car. Life lessons and laughs with friends. Good stuff man.
Funny how matt went from harder and longer biulds to expensive and short builds 😢😅
What dude environment!!!! The laughter is WILD!!!! 🔥🔥😭🤣🤣🤣🙌🏽🤘🏽
That spray booth in the garden 😂😂😂😂😂😂😂 wicked vid guys, it was a funny one , but end result was awesome, keep it coming 👏 👍👍👍👍😂
love you’re dad tony ace ace ace the happy man needed in every garage top top man who knows his stuff that man is a real dad and light to us all ❤
10:20 I rarely laugh when watching stuff on the internet, but this whole exchange was hilarious 'Whats this one??'
11:05 you guys were laughing so hard I started laughing😂😂😂
3:12 The “He is broken” got me dying 😂😂😂
I just love to see the difference between Mat who just stays himself, no 'trying to be funny' or changing as more populair his channel becomes and Freddy comes in the picture and you immediately see the difference (and what I mean...). That's why I love watching Mat's channel (and less Tavarish).
Please stay well clear of trees and ditches 😂😂❤❤❤
8:17 the way they were screaming to get Kevin out of the way 😂
Thats ridiculous
Matt you need to build yourself a large shop on your new property.
Do you understand how much money you are going to save learning the skill of body work and paint? Every build you do needs these 2 skills. Can’t wait to see you improve and grow. Much love from the states.
Rims looking really good
I would've blended the rear bumper also. Given that plastic panels don't accept paint the way metal panels will.
As far as the car painting goes mate:-
You can buy paint matched to the manufacturers paint code from several places in UK.
Paint suit and mask not needed (although eye protection (glasses) and a decent mask (with filters) would be ideal.
The anti static hose and the air dryer hose for paint. Not necessary at all.
Paint gun - you can get a great job with a paint gun that's worth a third of the cost (hell ive seen £80 paint guns do a decent job just take your time and set the paint gun up properly).
Sandpaper, brownpaper, painters tape etc are all cheap enough and are essentials.
The sander again you could use a cheap one or use a hand sanding block.
Not a criticism but definitely somethings worth thinking about
.....the dry ice cleaning was so satisfying......😊
I teach spary painting apprenticeships. You should always do a spray out card and clear coat it first. Check for opacity and colour. 😎🤙 Love your videos it's nice to see you having a go at it.
Respect
Loving the end test, but all I could think about was all that lovely dry ice cleaning has gone to waste 😂😂
This guy is brilliant love the comedy elements absolutely pissed my kecks when he set the blowers up wrong 😂😂😂
Best part of the video...Kevin attacking the tree. What a dude!
Lmao is that a bug splatter on the front 37:56 lmao
Top video that can't believe how simple the body parts are to replace
Mat spends money to clean the car with a fancy ice machine - saying the previous owner never cleaned the car and proceeds to drive like a maniac on the grass - love it 😁
I found myself laughing at your shock over the underside of that GTR. I come from a state in the US "rust belt" where honestly, one of the best undercoat protections you could want is oil and a healthy thick layer of dirt.
Now, I'm aware that you don't see the kind of winters there as we do here so it probably isn't a common practice. I'm also VERY aware that anyone who would buy a GTR and drive it in the snow would be a bit nutty.
I still found it funny that I didn't even blink at the sight of the GTR underbody.
Feel like Matt might get on some whistling diesel/mark mcann timing in all this land that is on his new house... And I'm here for it lmao
The paint blunder. What a great video. Funny AF and honest AF