Video

tunggu sekitar 30 detik, akan mati

I dont know cuz my car doesnt have talk button. I talk directly to android head unit which process my incoming phone call thru bluetooth. The android head unit listen to the wake-up word "hey google" and from there i can pretty much interact with it like giving a command "make a phone cal to...." "play music on spotify"... not sure if these function you are looking for.

If you mean the oem function of your civic talk button not working, then check if you have assign it to something else.

I am not sure what part of the trunk? The light? You just need to pry the plastic cover off.

Up*

Sometimes mine shows uo out of the blue and sometimes it doesnt at all... i think its a software glitch that is hard to track down the reason why. Anyways best of luck on your finding because i gave up and accept its fate. 😅

On the side note, it must be within the included 360° camera app. You might find some setting there.

you can choose which ever device to terminate on. IDM scanner is ok too. Just remember turn off the R120 ohm resistor on SB2040. If you terminate on SB2040 you need to make sure the 120 ohm resistor is remove from the IDM scanner.... The latter is complicated since the resistor is so small to remove on the IDM scanner. So it is advisable to terminate on the IDM scanner and turn off 120 ohm resistor on SB2040. Hope it helps!

Yes. There is a menu in parameter setting page which is something called touch calibration.

@@lavithhcm yes i found it. Thanks

Yes. Not a 100% sure but you can try this. Just need to press and hold right button until you get like c2 page ( where you can setup your speed, cadence, heart rate sensor) just keep cycle thru that right button untill you see mph "page" then you can change to km/h. That should default to SI unit measurement where GPS elevation would be in meter.

s.click.aliexpress.com/e/_mM0i1Gw

Not that i recoomend u to buy from the above link but a quick search return that result for your Toyota fortuner 2021. Check it out!

first thank you for stopping by and say hello. Yes ABS is perfectly fine for Voron part but I do prefer natural ABS color instead of white color.... White color ABS looks nice but I am not sure about its ductility properties. (you should compare ductility properties of the white color with that of regular/natural ABS, you should find the difference) Depends on brand, some are more brittle than other. Stay away from eSun ABS+ to print for Voron parts... . Just go with regular ABS material. I use Polymaker PolyLite brand for ABS and ASA material. In the video, I use natural ABS with no brand name... and it's cheap like $14CAD for a 1kg spool. It still prints nice as long as I got it stick to the surface and enclosure usage. Cheers and best of luck

Did you connect audio out from the Android Head Unit to AUX connector on the car. AUX connector which has 3.5mm jack is inside the center console box.?

@@lavithhcm nope, i had no clue about that. some mechanics did the work🙂

you need to have it calibrated with paper test when it's hot. Did you do that?

@@lavithhcm yes i did that

Have you seen $145 CAD maxxis tire yet? LoL

@@lavithhcm crazy, in Europe I pay 40e for Vittoria 4c tires. More than double the price for normal ikon is... 😆

If i have to buy Ardent Race here in Toronto I would have to pay somewhere around $130 CAD. I already paid $130 for the Ikon at SweetPete and didnt feel like spending much more money for tire so i bought from AliExpress source. Besides, i get to know why the tire is cheaper. 🤣

It is extremely hard for end user to know which one is from International version or north america version by looking at it..... unless they weight the tire and match it to Maxxis tire published specs.

Hahhahahah!. Anyways, old Maxxis DHF tire replacement and I really don't like dirt from the trails ending up on my hands. 😄

I recently bought an IKON here in Canada for $130CAD which is also "Made in Taiwan" and of course the ones before this Ardent Race tire which were all also "Made in Taiwan" Those were Maxxis DHR and DHF which lasted for a very long time since I started this MTB hobby 5 years ago. I have no issue or bad experience with Maxxis tires that were "Made in Taiwan" With that being said, I am not sure if there are any Maxxis tire factories in China. I doubt it though but anyone can correct me about this. So there aren't any "Made in China" Maxxis tire per se. But they do come from China. 🙂As in the video, I did indicate there are "International" version of the same tire which is spec'ed differently from "North American" version (Maxxis Canada website) So the tire is somehow different from North America. Remember all of them are "Made in Taiwan"! Despite all that, I do wanna try out later on down the road Vittoria tires for my MTB/road biking. Cheers and keep on riding 🙂

@@lavithhcm After 40+ years now on MTB cycles, I think we should all indeed draw from our own experiences. Only thing I can say, Schwalbe did it for me. As for Vittoria is also good, but I found those less endurable. Good luck since we got a awesome transport and sport in one cycle. Good luck!

Hahaha. Nobody is forcing you to buy anything. You must have some bad issue with Maxxis tires. Share your experience instead of bashing!

I get all my mtb tires from Ali. No problem. Save money

I know heh! 🤔 $129.99 CAD with 13% tax as you can see on the sticker. What a rip-off!

For this limited gps bike computer, i am not so sure but with CYCplus M1 bike computer czcams.com/video/1UUaSjfXlIk/video.html can definitely transfer FIT file to Strava.

At full blown, these fans for the activated carbon filter are loud. But inside the enclosure, I can't barely hear anything. Hope it answer your question! It is important to enclose the 3d printer.

Yes, this "International" Maxxis Ardent Race is spec'ed at 808 grams and the "Canadian" is 730 grams

Thanks for sharing your insight. For average Joe like me, the only advantage tubeless has over this TPU bicycle inner tube is the time saved during a race if I happen to have a punctured hole. Hopefully, glue will seal the hole. For any other kind of workout I dont mind taking my time changing the tube. From my experience, never had a puncture or a flat past 5 years even though i damaged (bent rim) the rim running too low pressure onto the curbs. 😄

What apps do you install in it? Some apps do intensively run in the background thus over heating the chip. Try to actually clear out all the apps by uninstalling it to see if that is the problem causing automatically shutdown. During hot summer day, i usually cover my android head unit to protect from direct sunlight exposure. Hope these tips would help!

I pump like 2 or 3 times on the hand pump and then spread the air around the tube. That was enought to install them correctly. Thanks for stopping by!

if no physically touching the unit but it acts on it own randomly, you might have a faulty touch screen. if resetting the unit doesn't solve the problem, it is most likely hardware problem. (unit over heating... corrupted ram..... and such .... who knows what.???) I do "sometimes" experience it randomly but not a really huge issue. Let's just call it a software/hardware glitch. The more apps you install in your system, more likely it will overheat and give you software/hardware glitch. I would advice remove unused and heavy apps like some heavy weather app or stock market app. 🙂 Check this video for what apps I used most. czcams.com/video/z8CQZXAR0UY/video.htmlsi=6nPJ3x3nG6NChpfm

@@lavithhcm which processor are you using? I got a 7862s and 8gb ram/128gb rom. Hoping this is enough as the 7870 wasn't available for my car.

the machine can only produce good quality print if and only if it is built correctly in both hardware and software. Since you have mechanical engineer background, it shouldn't be a problem building it mechanically (making sure frame and gantry is built nice and square) Software wise can be a bit tricky at first if you don't how to get around Linux cmd line prompts. Fortunately, there are helps online :-) Best of luck, if you need help just drop a line here. Cheers

your unit is totally different from mine. But I remember in the parameter settings where you can select your particular car model and make for the androind head unit to work correctly. Try it to see if it solves your problem. Check this video out czcams.com/video/4fpzmBexHbo/video.htmlsi=5BvFYA6guMQjSyLH at 1:11 mark

I also deleted the xcdvr2 app and now I don’t have any camera settings. How can I fix it?

Can you reinstall it? If you search on Google XCDVR2 it should pop up a lot of result. I think google removed these app from google play store so u cant find it there.

Depends on the firmware, if you reset the unit it will default back to those default camera apps. Unless you use some custom firmware, your pretty much on your own!

Thank you for sharing your experience! Cheers!

no app

You are so welcome!

Fulio has a reminder feature but havent actually used that function yet.

@@lavithhcm I'll give it a try. I just need something that gives like .. reminders to rotate tires, oil change, filter replacement, etc .. thanks!

Your tire has some ETRTO number printed on it in a form like 28-622. Look up in Google search for reference circumference. Most likely you may have to enter 2136mm in that circumference setting menu. So enter that number. Best of luck! 👍

@@lavithhcm thank bro. 2136 okey

Sorry to hear that. It may just be that your android head unit firmware doesnt support that touch calibrating function. Try use usb mouse and go into parameter setting page/menu to see if you can find any touch calibrating setting. Hope it helps! 👍

Thanks for the tip. I sure should do that! 🙂