![shooshinejonnie](/img/default-banner.jpg)
- 25
- 969 163
shooshinejonnie
United States
Registrace 2. 01. 2007
A mixup of 7.3 superduty, construction, construction tool trailer, and other projects. My goal is to bring value to you the viewer. Thanks for stopping by.
Shop built wooden hand knobs/handle for bolts and nuts
Follow along as I build a shop built wooden handle/knob for a hand tightened clamping bolt. They can also be used as nuts. I prefer hardwood for my handles but have made quick and dirty ones from plywood. Using an appropriately sized tap I can use the knob as a head/handle or as a nut. If it is to be a bolt head/handle/knob, I will use epoxy to fasten them together more permanently.
sounds by zapsplat.com
sounds by zapsplat.com
zhlédnutí: 3 180
Video
Be a third wheel. Installing Trailer Skid Wheels to prevent future trailer damage
zhlédnutí 20KPřed 4 lety
Follow along as I install trailer skid wheels. I have scraped and torn up my passenger side corner numerous times and I'm sick of it. I straighten out the damaged area as best as I can and install the new skid wheels.
DIY Battery Cable build for your Ford 7.3? . . . DON'T!
zhlédnutí 25KPřed 4 lety
So you want to build and install your own battery cables for your Ford 7.3? Don't do it. You'll spend nearly the same amount in materials as you can buy a Motorcraft OEM Battery cable. Don't do it. In this video I'll walk you through the entire process that I did to build and change my battery cables on my 2000 7.3 F-250 Superduty. Hopefully you'll see my frustration in doing this project. I am...
Do you grease your balls? You should!
zhlédnutí 12KPřed 5 lety
Follow along as I go through my towing setup. Do you have a different setup? Comment below with your tips and tweaks. Auxbeam Junction Box amzn.to/2uBI9W1 Auxbeam on Amazon: amzn.to/2Su1AtF Power jack www.amazon.com/gp/product/B00HNYPB96/ref=oh_aui_search_asin_title?ie=UTF8&psc=1 Breakaway safety cable www.amazon.com/Fastway-Foot-Breakaway-Cable-80-01-2160/dp/B004TR4IGW/ref=sr_1_6?keywords=safe...
Daniel's Contractor Trailer Tour Promo Video
zhlédnutí 2,4KPřed 5 lety
This is a promo video that I did for my father's website. Mastbuildersinc.com. It's just a quick video. By no means a comprehensive look. The layout is almost identical to mine. A few exceptions were made for different tools. He has a Dewalt table saw with the rolling stand so we placed that in the front right on the bottom. Most everything else is identical. We built this one along with anothe...
Sawhorse Storage Solution V2.0
zhlédnutí 1,8KPřed 5 lety
I am revisiting my sawhorse hanging apparatus as my previous one failed. Previously I had used electrical romex wire and soldered on copper lugs that I had made. There was a wiggle point and it became weak and broke at that point. This time I used nylon strap. Follow along as I make new storage handles for my sawhorses.
Changing the alternator in my truck (2000 f250 7.3) and a money saving tip at Advance.
zhlédnutí 15KPřed 5 lety
Changing the alternator in my 7.3 f250 Super Duty. How did I save money at advance? Watch and see.
Trim Material Cart/Job site storage
zhlédnutí 2,3KPřed 5 lety
Trim material storage cart. I built this cart for trim material storage for ease of movement because of our space issues on this job site. It helped with being able to move it out of the way and also to be able to move it to the saw when I need it.
Trailer Back-Up/Reverse Camera Installation
zhlédnutí 23KPřed 5 lety
Installation of a reverse/Backup camera on my cargo trailer Follow along as I install my backup camera on my contractor tool trailer. Here are the products that I used in this installation. If you have any questions or would do something differently please leave it in the comments. I’m always open to learning and suggestions. Thanks for watching. Trailer quick connect from etrailer Rvs213613 ww...
Construction Trailer Electrical Setup and Tour (110v and 12v)
zhlédnutí 34KPřed 5 lety
In this video I take you on a quick tour/overview of my onboard electrical system. I show how I wired and use my household current with outlets located at the rear and front of my trailer. I also go over the 12v system I have in place. The 12v system powers all the interior lights and my exterior lights when the switch is in the on position. The exterior lights become reverse lights when the tr...
Thoughts/ramblings/tips/tricks on servicing my 2000 Ford F250 Superduty
zhlédnutí 386Před 5 lety
Some of my thoughts and ramblings on servicing my 2000 Ford F250 Superduty. Some of the services I did were oil and oil filter, fuel filter, transmission fluid and filter, I also added a magnetic inline transmission filter, front and rear differential fluid, front end grease, tire rotation, and cleaned my air filter. I’ve included some ideas and tips for working over gravel by using underlaymen...
Modifying a water hose reel to fit my air hose
zhlédnutí 8KPřed 5 lety
In this video I will be making a push type clip for my air hose "tail whip" on my suncast water hose reel. Previously I installed the hose reel and took out all the guts as I would not need them anymore. The "tail whip" is for the purpose of reaching my air compressor which is a few feet from the hose reel. I was using velcro to hold the whip, but it was a pain in the behind. It took too many h...
Ford Super Duty Seat upgrade/swap/conversion (republish)
zhlédnutí 90KPřed 5 lety
Follow along as I wire and install 10 way power seats from a 2012 into my 2000 crew cab f250. I show seat wire diagrams and how to bypass the memory module. I also install the rear seat conversion from bench seat to 60/40 seat. When all of that is done I show and install the maximum size subwoofer box that can fit behind the seat without moving the seat. Console install and wiring update: czcam...
11-16 Superduty Console upgrade install and wiring
zhlédnutí 9KPřed 5 lety
This is how I installed and wired my 11-16 flow through console into my 2000 superduty. Wiring diagrams are included for 2012 wiring. Other years may apply.
Extension cord/Air hose storage solution
zhlédnutí 33KPřed 5 lety
Follow along as I build my cord rack hanging storage solution. This cord rack is located in the front of my construction tool trailer. It allows me to store my cords and air hoses in a place where I can see each one, be able to get to each one without moving another and at a glance see if any of my cords/hoses are missing. Total cost for project is $85-95 if you buy everything new at Home Depot...
Cargo trailer reverse light installation
zhlédnutí 55KPřed 5 lety
Cargo trailer reverse light installation
A "Paulk Inspired" Mobile Tool Trailer Tour
zhlédnutí 345KPřed 5 lety
A "Paulk Inspired" Mobile Tool Trailer Tour
How can I watch tv while I take a shower? Magnetic phone mount for shower
zhlédnutí 3,3KPřed 5 lety
How can I watch tv while I take a shower? Magnetic phone mount for shower
2012 superduty doors (passenger side only remaining)
zhlédnutí 490Před 6 lety
2012 superduty doors (passenger side only remaining)
How to modify folding sawhorses for quick storage and transport.
zhlédnutí 2,3KPřed 6 lety
How to modify folding sawhorses for quick storage and transport.
Ford Superduty "no start" in park or won't go into park
zhlédnutí 79KPřed 6 lety
Ford Superduty "no start" in park or won't go into park
(See link for new video )Ford Super Duty Seat upgrade/swap/conversion
zhlédnutí 50KPřed 6 lety
(See link for new video )Ford Super Duty Seat upgrade/swap/conversion
how big is the engine & whats the horsepower???
@@truckerray7533 I have no idea. Probably a 3 and 1/2 horsepower.
@@shooshinejonnieCopy that, I was just curious! Sharpen up your blades!
@@truckerray7533 it got tossed into the scrap pile after I was done.
question - I followed the wiring diagrams (2013 King Ranch seats in a 1999 Ford F250 diesel), but the horizontal forward backward wouldn't work - I got a new switch, didn't help. Did anyone else have this problem? (I thought it might be a bad "new" switch, and bought another - still no horizontal forward/reverse, even though it by directly hot wiring the motor. (?) Great video - best I found! It helped me not trip the airbag, and told me that green is hot and black is ground from original vehicle.
I just replaced the shifter rod and now my key cylinder won't turn all the way back to the off position. I lube the shifter cable because it wasn't going in park enough either. It now goes into park and starts but I wonder if I'm not fully into park? And that's what's not allowing my key cylinder to go all the way back? Any thoughts?
It's been a minute since I've done this but if I remember correctly a tooth difference on the transmission adjustment can make a huge difference. I would start there. 🤷♂️
@@shooshinejonnie Thanks do you mean adjustment on what was shown on this video ?
@@bobbauer2287 That is the one I was referring to. Have you already adjusted that? Outside of that, I'm not sure what to look for next.
@@shooshinejonnie ok yeah no I have not but I will give that a try and let you know. That's the neutral safety switch. Thanks Bob
what type of plywood did you use?
@@jeremiahmurray1622 AC plywood
Just fixed my truck 1999 f250 super duty, about 2 weeks ago after parking my truck on a slight incline, It jumped out of Park and started to roll! Just yesterday it would not start i park, I Looked it up on your channel and fixed it! Thank You!
@@larryhewitt1078 That's fantastic! I'm happy you were able to find your solution.
I forgot to add, I put lock tight Blue on both screw threads
This is definitely worth a try. Clearing brush sucks. I would still take out the saplings with a $50 battery chainsaw or sawzall instead. Sharpening the blade beforehand also should make it go a lot faster and not stress the engine as much. Also could help to do it in the winter when a lot of the leaves are bare.
You, sir, are a genius
@@bigshawn99t thank you
You, sir, are a genius
Ive been doing wheelies with a lawn mower through my field. This will be way better. Thanks man!
Good stuff son! 🤟6:07
Thank you.
Nice, thanks for the knowledge.
I just upgraded to a 7X 16 TOOL/CARGO TRAILER. TRYING TO GET SOME IDEAS ABOUT SHELVING LAYOUT. I LIKE THE WAY YOU HAVE YOUR TRAILER LAID OUT DO YOU HAVE ANY DIAGRAMS? WAS WONDERING HOW TO PUT POWER TO MY TRAILER ASWELL SO THANK YOU.
Have you watched any of my other trailer videos? There will be a lot of information in there. Shoot me an email at shooshinejonnie@gmail.com And we'll get connected there.
I saw a guy who put a used worn out skill saw blade on a weed eater, but your idea looks like a safer option.
If you could find a big enough saw blade you could do it on the mower as well. 💪 But then your saw blade would probably cost twice as much as the lawn mower itself. 🤷♂️
@@shooshinejonnie I've got them all sizes to re-use in a pinch. I have to resharpen them to cut lumber, which is a pain; but they should go through a live sapling without much trouble. Once the carbide tip wears off, they are quickly dulled again. If I have time, I fetch the saplings out with a 12 ton come-along, then cut them up while they are still green to season for firewood. If they are too close to a rock wall or foundation, I cut them off as close to the ground as I can, then dap some stump killer on it. Riveting chain saw teeth on the old blades would work too.
Bright yellow means “airbag”. Bright orange means “high voltage EV”
REally nice job!
Love this!!!
Thank you.
That's a great idea, you could also cut a clearing out around the area that you want to eliminate and in the fall of the year set it on fire. Be careful leaving the shoots of the saplings because you could end up puncturing your truck or atv tire on them!
Just sent you an email. Would love your knowledge hooking up my 2012 door panels on my 2002 truck.
Great video!!!
My truck is next looks fun but I like that work
Looks like kit is 400 now
It doesn't surprise me. I'm sure buying everything separately and building it yourself has also increased significantly.
@@shooshinejonnie Where would you buy them all ready made from?
@@coolblue4077 I have no idea. It isn't something I've needed in the last several years so I haven't looked.
Thx for the video. Thieves are know to drag trailers by their chains - no use blocking the coupler. Just keep a gps in the trailer.
Thank you 🙏 so much for your help.
I'm glad you found it helpful and I appreciate your feedback.
What is that console out of?? I’ve never seen a flow through style console in any 08-16 SD…I’ve seen the expedition ones swapped in which look good, but that one looks really good…
2012 f250.
hmm, camera guy needs some work great video anyways though 👍
Thanks camera guy. 😁😉
does this also relate to older fords? i have a 94 f150 that wont go into park
That I don't know. You could always check. I'm thinking the neutral safety switch on the transmission should be a fairly common design. May not be exact.
Perfect for an allthread moxon vice.
I like using carriage washers or blind nuts when I don't have the right sized tap. Thanks for sharing your build, it's much appreciated!
Thank you.
Nice!
Thank you for your kind words.
How is the system holding up 5 years in?
Still works great. It doesn't get pulled to the job very often anymore since I'm taking on a new role but when I need it it's ready to go. I would still do it all again and I recommend it to anybody. Especially my subcontractors.
You should've got the military battery post those aren't good
Anthony, I should have read your reply from one year ago and I definitely would agree with the lithium ion battery. What size lithium ion battery do you think would be sufficient. Thanks Joe.
I'm not sure what would be suitable. I've taken mine out and replaced it with attachments for two 18v Makita batteries. They drain quicker than I suspected and all they are pulling is the LED lights.
0:57 Anthony, would you do your electrical the same way today and if not what would you change? I am putting together a tool trailer for myself now. Thank you, Joe McIntyre.
Thank you! Not easy to get to but my 2000 E250 was missing one screw 😊 Works like a champ
Fantastic!
@shooshinejonnie, did your 2012-2016 center console install level? I installed the same console in my ‘03 but it’s slanted downwards towards the driver side.
As far as I'm concerned it did, I don't see anything that seems off kilter or askew. 👀🔎📐 Did you use any of the under/center brackets or the front bracket? I did not use any of those. 🤷♂️
@@shooshinejonnie just the rear brackets next to the seats. I noticed the factory console when placed on the ground also leans towards the driver’s side. Maybe the factory trans tunnel on the 2000-2007 is unveven from the factory and the 2012-2016 is not
I have a 2000. Should be the same. 🤷♂️
I’m going to try this. I have a 1999 f250. No start. I want to see if this fix.
It's a good place to start.
Thanks much -- good job !
Fantastic video. Direct to the point and found my bolts loose under the dash! Was able to tighten them up and seems to be working fantastic! Used to have to be careful parking as truck tended to roll or go into reverse. Thank you very much!
Thank you. Happy that you were able to find it.
I just got a cheap used push mower and I really want to do this to it
You can definitely make it last longer if You have some welding skills and beef up the front end. These are all stamped and so when you cut some out it definitely weakens it.
yeah buddy the bright yellow (usually an indication of a warning color) on seats is ALWAYS airbag related.
Right on the money! Thank you.
I'm glad you found the information helpful. Thanks for the comment.
Excellent Tool Trailer Build. Can you provide more info on how you made the swing up cord/hose hanger set up @16:39 that is in the far end of your tool trailer?
Thank you. And yes. czcams.com/video/xEsLtEk5uUo/video.htmlsi=C4yCJ9F8-WFQJ6hx
You fixed my truck! Thank you.
I only showed you where to look and you fixed it. Awesome news !
Just refurbish the ends and connectors.
Sometimes that's a possibility.
The music is beyond irritating.
Wtf did you move?? I didn't see anything move to line up with that natural line
It's been so long since I've done this so I don't remember exactly. But if I remember correctly there are teeth on that gear. I only moved it a few notches.
What a nice setup. I have worked out of a service body truck for 30 years now and couldn't agree more with the being efficient and professional aspect of an organized setup.
Thank you.
“I just tweaked some this morning” Ok, I’m in.
Really sweet job you did!
Thank you.
What length is your trailer? Thanks
It is 18'.