Video není dostupné.
Omlouváme se.
Ford Super Duty Seat upgrade/swap/conversion (republish)
Vložit
- čas přidán 18. 12. 2018
- Follow along as I wire and install 10 way power seats from a 2012 into my 2000 crew cab f250. I show seat wire diagrams and how to bypass the memory module. I also install the rear seat conversion from bench seat to 60/40 seat. When all of that is done I show and install the maximum size subwoofer box that can fit behind the seat without moving the seat.
Console install and wiring update: • 11-16 Superduty Consol...
You can also check the old video comments here. • (See link for new vide...
Thanks so much for posting this video! I would have been lost installing my new seats without it.
My pleasure Scott. I'm glad you got it figured out.
Hey thanks for the great video, it helped me out tremendously ! and I did't know there was an airbag in these seats that I got for my k5 blazer.
My pleasure. Glad you found the airbag differently than I did. 😉👍 Thanks for watching, commenting, and supporting the channel.
I appreciate your commitment to the video.
I feel bad you set the airbag off. That sucks. I hope you learned from that mistake.
Only part I didn't care for was the butt connectors.
Video was very informative. I just did a swap in our 06 but could not find nice seats like those you have
Hey thanks for watching and commenting. I definitely learned from that mistake. Always double check wires and never assume. I posted hoping it would catch attention and people would know what to look for and to be aware that it can hurt you.
question - I followed the wiring diagrams (2013 King Ranch seats in a 1999 Ford F250 diesel), but the horizontal forward backward wouldn't work - I got a new switch, didn't help. Did anyone else have this problem? (I thought it might be a bad "new" switch, and bought another - still no horizontal forward/reverse, even though it by directly hot wiring the motor. (?) Great video - best I found! It helped me not trip the airbag, and told me that green is hot and black is ground from original vehicle.
Just found your channel. Very excited to do what you did! Thanks!
I hope you find the information useful. Thanks for commenting.
Keep me updated when you do hook up the cooled/heated feature. I’m looking to do that conversion into my 2019 Kenworth W900L. I sourced a set of front seats out of a 07 Lincoln Navigator (pretty much the same as yours) and Ford dealerships here are no help
When I get to that, which is hopefully soon, I'll definitely make a video on it. Thanks for watching and commenting.
yeah buddy the bright yellow (usually an indication of a warning color) on seats is ALWAYS airbag related.
Another informative video. Thanks, Anthony!
My pleasure!
Yellow connectors in most modern cars are almost always airbag related. You cannot use test lights or a dvom on any of those circuits.
Thanks for sharing the tip.
Bright yellow means “airbag”.
Bright orange means “high voltage EV”
Thank you, can you very much, it is great. Hope you hand is fine.
Thanks for watching. Yes, my hand is fine.
Hey good stuff man this video helped me out a lot installing King Ranch seats in my OBS! Good safety tip on the airbag as well and hope that hand heals up good brother!
Ha 😄. I'm glad that it helped. The hand is perfectly healed. Thanks for watching and commenting.
@@shooshinejonnie Hey man I ran into a problem and I was wondering if you can help me, the King Ranch seats I have are out of a 09, I have everything working but the recline, I have the same problem on both seats !
@@obsfordsandclassiccars8578 do you have the pinout for the 09 seats? Shoot me an email at shooshinejonnie@gmail.com.
LOL!!!!! I just had an explosion in my living room trying figure out what each wire did... Luckily the fabric didn't blowout. But I was like 'WTF'.... I got the motions but I was looking for lumbar and heat. But I think motion is good enough.
Whew! Glad nothing major happened. Good luck.
@@shooshinejonnie Thanks... Same to you.. Those airbags are dangerous as 'you know what' .... and costly. I paid $150 for this Mercedes seat.
Thumbs up Shooo!!!!. Thanks for the info and sharing. Best Wishes & Blessings. Keith Noneya
My pleasure. Thank you for the kind words.
You are a lifesaver. Thank you so much.
I don't know about lifesaver but I'm glad it solved a problem for you. It was my pleasure and thanks for watching.
Hey so I got power and heated 06 lariat seats for my basemodel 02. What do I need to wire them up?? Thanks
Send me an email and I'll send you what I have. I have 2000-02 and 12-13 wiring diagrams.
shooshinejonnie@gmail.com
With the carpet under the seat where it mounts takes most vibrations out when sitting in the seat
I haven't noticed any difference. The cutouts are in a stock carpet from a 2012.
Here is what I did, the memory module has a 2 pin plug leave it plugged in and on the back side put power to green and negative to black then go to the switch wires and put positive to orange and green and the negative is black and blue and on mine they were on opposing ends of the plug and leave it plugged in and i did not cut a single wire and they work fine and the memory module is powered up, just use a car or motorcycle battery to test, every other video I have shows butchering wires, sorry bout the air bag!
Thanks Bob for the tip. I do know that you don't have to hack it up this way but it was the only way I knew at the time. Thanks for watching and commenting.
Super, very informative: thank you Anthony!
Question, on the 2015 seats to 2003 truck swap, does the seat belt buzzer need wiring? Any warning sound or light on dash?
I'm not sure on that part. You can leave it off and see what it does. The 2000 had no issues. If it does, you'll have to figure out how to wire to "close" the loop if you want it off. Or you could leave it so it buzzes.
Great video 👍🏻👍🏻
Thanks for watching.
Thank you for the video
I have 2000 f350, manual seats, and I want to update with manual 2017-2020 combo seats, any idea if I have to do any modifications?
My understanding is that there would need to be modifications made. How much I don't know. I do know that the cabs were redesigned and they will not be bolt-in like 2016 and previous.
Great Job
Thank you John.
I did this with my 2003 F150 I put 2002 king ranch seats but my truck didn’t have power seats the Harness is different so now idk what to do any ideas
Yes. So what you'll need to do, since I don't have the pin outs for an F-150, is find the electrical diagrams for a 2002 and 2003. You can get by with only the electrical diagrams for the 2003 since you can find the power and ground from your truck's harness with a multimeter. You'll need to know the power and ground of your seats so you can connect those two wires together. Or you can bypass everything that's there now and run new wires and put a new fuse block in as I did with my passenger seat. If you have any more questions you can reach out to me at shooshinejonnie@gmail.com.
I hate the 2019 superduty lariet seats I have. I miss my 2016 2011 types so much. Wish i could put those in my 2019.
The 11-16 are super comfortable. Going from 2000 worn out, so crooked it made your back ache, was a huge difference.
Can you please provide the written sheet with all wires going where. I didn’t see it at the end of the video
Sure. Shoot me an email at shooshinejonnie@gmail.com and let me know what years you are looking for.
I got a 1997 ford XLT 350 dually, shes in mint shape ,I just bought er off a older gentleman n she's NEVER saw a winter, either she was in storage in winter or she sat in Flordia. CAN ANYONE TELL ME WHAT INTERIOR I COULD USE TO PUT IN HER??..🤔✌
Sounds like you have a jewel.
You can put anything in you want with enough time and money. I have seen OBS with complete super duty interior. It's definitely not bolt-in though.
@@shooshinejonnie hey young brother ,what interiors would u think would work best for me to look for in my case on my 1997 350? I had a brand new 19 RAM n I sold it as soon as I got my hands on this old girl , I waited soon to find this time capsule IN FANTASTIC CONDITION N ORGINAL SHINNY PAINT!🥳💞
@@vtwinpower1897 I'm not sure which way to send you on what to look for. I would guess they're all going to take quite a bit of modification. If you're just looking for seats I would start with F-150 or super duty seats. Find which ones the cheapest and grab a set and do some experimenting. Or maybe go to the junkyard and pick up a cheap set of busted up ones so that you can use the mounting brackets to figure out what you need. The f250s are just a little bit wider than the F-150 as far as seats go. I know there's some videos of other guys doing the super duty interiors into an OBS. I don't have any links.
Hey man! Awesome video. I laughed a lot at your airbag humor. Did you ever get the heat and cool figured out? I'm thinking of trying this with 2010 f150 seats onto my 1995 f250. Wish me luck lol!
Thanks for watching. 😁😆 I've found several ways to hook up the heat and cool but I haven't done it yet.
Good luck on the seat swap. Anything can be done with patience and a "can do" attitude.
Are you an Ameri"can" or Ameri"cant"? 🤘😁
@@shooshinejonnie I'm a canadi'cant' 🤣
@@liambassingthwaighte8636 ha ha😄
@@shooshinejonnie Great vid! i am currently doing the same swap. Can you please tell me what method/wiring you used to get the heat and cool functions working? I have a couple of double pole double throw relays to start. Thank you
@@fullthrottlez06 thanks for the kind words. I've never connected my heat and AC for my seats. It's still on the "to do" list for the future.
I have an 02 F150 and I want to upgrade the seats what years are compatible how new can I go and still have auto seats and everything fit also can you upgrade the dash and stuff?
Thanks for watching and commenting. As far as F-150 swaps, I have no idea. You may be able to find a forum or Facebook group dealing with the F-150 and ask questions there.
What is the wire diagram for power and ground??
Shoot me an email with the years that you are swapping. I have 00-02 and 12-13 if those help. shooshinejonnie@gmail.com
So if your putting 08 seats in a 12 do the frames come off with all the wiring or are the seats too different
The frame should be the same. Maybe I'm not quite understanding your question. The seats are almost identical and the wiring is almost identical.
So you just put power to your passenger seat without reworking the wires and it worked? Trying to figure out my 2016 6 way seats that I'm throwing in my 2002 f250.
Yes. You can do both seats like this fortunately. The driver's side has multiple power and negative points. Read through the comments of this video and of the original video of the same name. You don't have to hack up the seat wiring. I am not an electrical guru so I just did what I knew was supposed to work. If you have any further questions you can ask here or shoot me an email at shooshinejonnie@gmail.com.
@@shooshinejonnie thank you sir for the video and reply.
@@austinb.2029 👍
Hello I have 2016 seat I would like to put in my 01 do u have the wire schematics or which wire goes we’re.
I have the 01 writing diagram and I have 12-13. Shoot me an email at shooshinejonnie@gmail.com and I'll get you what I have.
@shooshinejonnie, did your 2012-2016 center console install level? I installed the same console in my ‘03 but it’s slanted downwards towards the driver side.
As far as I'm concerned it did, I don't see anything that seems off kilter or askew.
👀🔎📐
Did you use any of the under/center brackets or the front bracket? I did not use any of those. 🤷♂️
@@shooshinejonnie just the rear brackets next to the seats. I noticed the factory console when placed on the ground also leans towards the driver’s side. Maybe the factory trans tunnel on the 2000-2007 is unveven from the factory and the 2012-2016 is not
I have a 2000. Should be the same. 🤷♂️
I have a 2006 f350 king ranch and I want to install one from 2016, does the same apply to what you show in this video?
I know it bolts in the same and you should be able to wire it up. I would recommend not doing my driver seat the way I did. Find the pinouts for the wiring harness and connect all the power and all the ground and you should be good to go. Unfortunately, I don't have the pinouts for either of the years that you have.
@@shooshinejonnie you are the best thanks for the help I will follow the steps recommended by you .best regards from Miami
Thank you for posting this video. Will F150 king ranch bolt on to a 2004 250/350 super duty?
From my understanding F-150 will not bolt directly into a super duty. You will have to do some modifications. I believe there have been some that have moved the seats over to the seat bracket of a super duty or have modified the F-150 brackets.
@@shooshinejonnie Thank you 👍
thanks...
My pleasure Christal.
I’m looking at buying 2008 seats for my 2004. Will they bolt right up. No issues?
My 2012 bolted right into my 2000. I believe they bolt right in with no issues.
Want your opinion, do you think 2012 f250 seats will directly bolt onto a 2008 f250?
Bebo from what I understand 1999 through 2016 all have the same bolt pattern. Because I used the console and the seats from 2012 everything went in like a glove. I believe if the consoles and the seats are not the same year you may run into some bolting together issues. Slight modifications and you should be good to go.
Okay, thanks. Just purchased some 2012 black leather seats. Thank you!
@@bebo653 cool. I'm not sure what the difference was between 2008 and 2012, but the difference between 2000 and 2012 was drastic.
Thanks again. Seats bolted right on without issues. Now the wiring part. Thanks for your guidance.
@@bebo653 fantastic! 👍 Glad that worked for you. Do you have the wiring diagrams for both sides? I have 2012 but not the 08. Shoot me an email at shooshinejonnie@gmail.com and I'll share what I have.
Anyone seen anything about wiring harnesses? Like “plug and play”?
I just put all my ‘14 lariat seats in my 06 but I can’t move them I figured it’s been 10 years
I haven't seen anything about plug and play harnesses. There are so many variations. You can find the pinouts for both of those years. Unfortunately I have neither of those years. You can shoot me an email at shooshinejonnie@gmail.com if you have more questions.
shooshinejonnie thanks! If I find any I’ll link it back here. By the way mine is an 06 f150*
Thanks for the video..... I have a set of seats out of a 2003 Nissan Altima. The drivers seat is a 10 way with a memory moodule that needs bypassed. My question is where would I find a wiring diagram like you have? One that shows each wire from the switch harness side. And what wire it needs to be connected to on the motor side.. Thanks
I eventually found my diagrams on eBay. I bought the wiring diagram manual (usb) for both vehicles. I'm my case it was 2000 and 2012 Ford super duty.
You could also check forums or Facebook for vehicle specific pages and info.
@@shooshinejonnie thanks
What size star bolt is that seat mount using? It’s a big un.
I think it's t55 plus. You can use a regular t55 but you need to keep pressure on it so it doesn't slip out and strips. I used a t55.
shooshinejonnie - Thank you sir! My set goes up to T50 so I knew it was bigger than that.
How was installing the console how did it bolt right in how does it look up against the dash
Yes it bolted right in. I only bolted it down in the back. I had the other two brackets for it but I had no way of making the holes and knowing where they go. Here's a link to the video on how it looks.
czcams.com/video/MNO8reR-qtA/video.html
Whats the best place to find clean black seats?
My '10 doesn't have headrests and I'd like to upgrade to some heated/cooled jobbies.
I found mine in a Facebook group. You could check Craigslist via searchtempest.com or you could also check carparts.com. Check your local junkyards. Some get lucky and find them there.
Brad also just started a Facebook page "OEM Seats Stephenville" showing a handful of the seats he offers. He's constantly receiving and shipping seats weekly so he doesn't maintain an active website or much photos due to the volume he sells.
So has anyone swapped a 40/20/40 seat out of a 2011 in an 04 with a manual transmission. Will my lever hit the the consol part
Absolutely. You can swap the seats but you would have to go with an 08-10 console. Those consoles don't go all the way to the dash.
@@shooshinejonnie yea i bought the set that has the center flip up to a seat or down to a consol. The 04 consol is back from the bottom of the seat about 5 " and the 11 come out flush with the bottom of the seat. I mesured but its nice to hear from someone who knows for sure.. thanks
@@n1uk214 as far as I know the center fold down seats are interchangeable so I'd be very surprised if it didn't work. You'll have to test it for yourself or you could check on the Facebook group "powerswap nation".
I guess ill be checking it monday evening. I appreciate the reply abyhow. Ill let you know one way or the other.
@@n1uk214 yes, please confirm.
Will 2015 seats fit into a 2005? Thanks guys!
Yes they will. 99-16 are interchangeable without a lot of modifications other than wiring.
@@shooshinejonnie Thanks man!
@@jpdst29 my pleasure.
Will a 2017 f250 super cab seat set (front/rear) fit in a 2008 f250 supercab
I don't believe it's a direct bolt in. They changed everything. I'm sure something could be fabricated to make it work.
Did you ever determine if the seats were compatible? I am trying to upgrade my 2009 F250 with a 15 F250 interior.
I want to do a similar seat upgrade. What if my 2000 super duty does not have power seats?
You could check under the flooring to see if you have power. If you don't you could do the driver's seat like I did my passenger seat and wire it up yourself.
Did your old seats where powered ?
My original driver's seat was powered. If you do not have any power you could wire both seats like I did my passenger seat.
Will 13 platinum seats bolt up to my 2003 dually im having trouble
I put them in and they do not bolt up
@@Nicaelmusicinc1 are you missing bolts? Or are the holes not lining up?
The don't line up at all the front brackets on the seat are 2 inches short from reaching the front
@@Nicaelmusicinc1 🤔 my understanding is 99-16 bolt right in. They are out of a super duty? And you're putting them into a super duty?
Just realized the dude sold me f150 seats -_-
beware of airbag
☝️☝️ you are correct. Thanks for watching and commenting.
Nothing you are showing does any good if you don't also show how to remove the seat.
Unbolt the bolts and disconnect the wires. Should be 4 bolts per seat. 🤷♂️
If there are then they are hidden under the carpet or plastic trim somewhere and I don't want to rip, break or tear anything trying to get to them.
Not knowing where they are
@@mlcollins7481 if you're still lucky enough to have your plugs they should be under those. Round plugs in the plastic trim probably about 1.5" in diameter. It's been so long that I don't remember. I don't even remember if I have the plugs on my newer seats.
This might shed some light on the subject.
czcams.com/video/Zuds3aliRAw/video.html