Superduty Door Panel Swap
Vložit
- čas přidán 24. 09. 2018
- Follow along as I swap out my door panels in my Ford F250. I have a 2000 and I replaced my door panels with a set from a 2012 superduty. I go through the details of how I modified my stock door to get the new door panel to fit properly and with good alignment. I go through the wiring but not the "how to wire" There are simply to many combinations. If you have 2000-02 truck and are switching to 2012-13 I have the schematics and pinouts for those years. You can buy them from ebay if needed or I'm sure if you would like to buy me a beer I could get you what you need.
- Jak na to + styl
Thanks again Anthony for the videos and all your help! New door panels installed and all wirings complete and all switches work.
Fantastic! 👍👍👍 Thanks for reaching out and supporting the channel.
I bought the same door panels last week, just waiting for them to arrive. I just came across your video and wanted to say thank you very much for doing the hard work for me and everyone else. Much appreciated 👍
Thank you Scott. If you need the wiring diagrams shoot me an email. shooshinejonnie@gmail.com.
@@shooshinejonnie can you send to Eleazer.mills@gmail.com
@@EleazerMills shoot me an email at shooshinejonnie@gmail.com and let me know what years you are swapping. I'll share what I have.
@@shooshinejonnie thanks
Great video, now I will definitely be doing an interior upgrade on my 07 6.0 l.
Be careful. It's addictive. 😁
Thank you for watching and commenting.
Did you already see my other video on the seat swap?
czcams.com/video/i_sdbPMmjeU/video.html
TENKS FOR THE VIDEO
Well done video!
Thanks Richard for the kind words. It's something I strive for. Thanks for watching.
Great video !!!!!🔥🔥🔥🔥🔥
Thank you.
Just did my door panels (00 with 08 panels). One thing I recommend is to swap out the inner window gasket. The newer ones will let the door panel set down and fit tightly to the door.
That's a great tip. Thanks Dan for watching, commenting, and sharing knowledge.
You have a part number for those window gasket?
Nice work! I would love to see a video of the actual mounting of the seats and that center console! Looks like the fitment from the center console to dash isn't as bad as I would have thought.
Thank you.
The seats mounted in the exact same spot as the old ones did. The console also mounted in the stock jump seat location. If you have a bench seat you may need to drill holes but the nuts should all be in the underside of the floor. If I remember correctly I went over this with my back seat going from bench to 60/40.
Thanks again for watching.
You can check my seat swap video here.
czcams.com/video/i_sdbPMmjeU/video.html
@@shooshinejonnie Thanks for the explanation. I should have done a little more looking before I asked. I've been looking at putting one of those center consoles in with my factory chairs from my 2000 40/20/40 bench with the jump seat. I've heard some say it'd work some say it wouldn't. Do you think the mounting brackets would work with the older seat brackets? Thanks again for some nice informative videos.
@@LivingOnWheels I've asked in my group and someone said it can be done and has done it. Not sure on any modifications but I'm assuming it would be minimal. Now we all know what assuming can do. Hopefully this helps.
Thanks for sharing.
My pleasure.
nice video. I have a 2000 that I am currently doing a dash swap (2008 dash) using McNasty Customz conversion kit. Ill eventually be installing some King Ranch seats in it as well.
Thank you.
@@shooshinejonnie If you send me the pinout on the 2012 door panel (wireing diagram) I have a 01 I'm swapping to 2012 door panels. I'll buy you a 12 pack via PayPal
@@bricemassey8028 shoot me an email at shooshinejonnie@gmail.com and I'll get it to you.
@@shooshinejonnie I tried that email it says it's invalid. If you could shoot me an email. bricemassey985@gmail.com
@@shooshinejonnie Are you still interested I really need that pinout wireing diagram
Great video and result! We're the doors able to close and not interfere with dash?
Thank you Mychael. The doors close fine. It does rub slightly. I haven't noticed anything wearing yet but haven't really looked that closely.
Good video and good information. I have a 1996 Ford F250 but has manual locks and manual windows. I would like to have newer door panels that have pockets in the panels to hold things, no power windows or locks in this truck.
How can I find out if I can put newer door panels on these old doors and if so, what years will work? Is there a reference book or site out there somewhere so I can get this information?
Thank you.
Thanks for the kind words. As far as the OBS goes, I'm not aware of any simple swaps but I'm sure something has been done. I've heard of doing full interior swaps from superduty to OBS, but I don't know any details. I would check on the Facebook page "powerswap nation." It's mostly geared for 99-16, but you may be able to find more info there.
How did you install the center console? There are 3 brackets front (dash mount), middle bracket (goes to the floor of body), then the rear bracket (uses the studs coming up from floor of truck body). I just did this install, seats and console from 2013 into my 2005 6.0. Curious if you drilled the center bracket into your truck body floor. I will also be doing the dash upgrade but waiting on the swaphelper modules to be released before I do the swap. Looks good! Your installs are very familiar to me right now! lol. I used your seat wiring. Thanks!
Thanks for watching and commenting. On the center console, I didn't install the front or the middle brackets. I couldn't figure out how to mark them to drill them out. I haven't had any issues with it so far. One time I leaned heavily on the very back part and the front flipped up a bit, but it's never happened again.
I do have a center console install and wiring video.
@ 17:25 after you clean or detail your truck, just spray the area with Silicone. It'll keep the abrasion to a minimum.
Good tip. I haven't noticed anything yet. Thanks for sharing, commenting and watching.
are those factory mirrors? looked to see if you had a video on them but couldnt find it. ive got ford mirrors and was hoping to find a wiring video for them
They are factory style for 08-16. They are not oem. They are Dedc brand purchased on Amazon.
www.amazon.com/dp/B00VT02ZEE/ref=cm_sw_r_cp_apa_fabc_GCEQCR48V22MPYA9YEFJ?_encoding=UTF8&psc=1
I wired them in with the help of this video:
czcams.com/video/i0FWmuFgq5I/video.html
Where did you buy the whole kit from? My local junk yards never have any newer f250’s
I bought it from someone in one of the Facebook groups. I did have to drive about 7 hours one way to pick it up. Check out different Facebook groups such as Power Swap Nation. Check Craigslist. You can use searchtempest.com for Craigslist to search by regions or states to give you a broader search area in a short amount of time.
What is that console out of?? I’ve never seen a flow through style console in any 08-16 SD…I’ve seen the expedition ones swapped in which look good, but that one looks really good…
2012 f250.
for the rear doors, did you use the newer door handle cups or the existing ones and trim them?
I used the newer style cups.
The you have a part number for door cups or year/model used when ordering? Ford has already sent me two different kinds and both were wrong (one protrude too much and the other was short in length).
damn great video. i want to do the same thing to my 04 excursion n=but was wondering about the wires matching. do you have any pin outs for the 04's?
Hey thanks for watching. I don't have the pinouts for an 04.
@@shooshinejonnie thanks boss.
@@mrmotita510 I have 02 which is completely different than my 00. Can send you those to see if it's close. Shoot me an email at shooshinejonnie@gmail.com.
I just did the swap, and finish the door panels, the dash and im working on the gauge cluster. Almost done with the gauge cluster and everything works flawlessly. If you need help i can give you my number to send you picture and walk you through what i did.
Thanks Gunnar. If in the future I decide to still do the dash swap I may take you up on your offer. Keep the pictures handy because if I do the swap it may be awhile.
shooshinejonnie 👍 i can build the gauge cluster for you and walk you through the hvac box conversion when you decide to 🤘
@@6.blowpowerjoke791 👍👍
Can you make a video of the finished product?
Gunnar Easley I’m doing 2000 to 08 only problem I’m having is getting the lights in the door switch to come on is there a wire that I need to hook the led+ wire and led- wires too
im doing this swap to my 2001 f350 do you have the schematics for the rear doors?
I do. Shoot me an email at shooshinejonnie@gmail.com.
hello all , great video my friend thank you for sharing it , i m in costa Rica 🇨🇷 and ready to do my door panels swap from an 06 f-250 to 2016 panels and i wanted to ask if your diagram will work for my 06 truck and if so will you be willing to share it with me than you in advance.
I have the diagrams for 2000-02 and 2012-13. I'd be happy to share them with you but I'm not sure they are going to help you much. Connect with me at shooshinejonnie@gmail.com.
Nice work it's good to see people like you have the passion to do these kind of upgrades my question I have a 2001 F350 I bought a set of 2013 door panel you think the wiring would be the same as a 2012
Thanks for the kind words Bo. The wiring would be real close. The good news is I have both of those schematics. Shoot me an email at shooshinejonnie@gmail.com and I'll share those with you.
I’m converting 2012 Ford F-250 panels to my 1999 Ford F-250 I bought a light up volt tester I found window up and window down wire but I also found one wire constant and two wires with nothing. I’m might be in over my head not really sure. Any advise ?
Sorry Jacob. Did you find what you were looking for? shooshinejonnie@gmail.com
Any pictures of the front end swap yet?
Nope. I never did the front end swap. I sold all my parts. Maybe I'll eventually get the newer front end (on a newer truck). 😁
so what do you like about the 2012 door panels? what would make me want to swap?
Functionality? Nothing. They are basically the same. They have the same function. It's mostly about the look or the continuation of the look for me since I had purchased them in a package deal.
Also, is that new carpet on the floor? Did you order it online?
It came with my package deal. I bought nearly a complete interior and it was included in that. It works fairly well. My original door sills aren't quite as wide as the newer ones so I have a few threads sticking out.
@@shooshinejonnie Where did you buy your package deal?
@@jfubele I found it through a Facebook group.
Do you have a copy of the pinout you made?
I do Hunter. You can contact me at shooshinejonnie@gmail.com.
Where did you get your speaker kick panels.
They were in the truck when I bought the truck so I have no idea where they come from. I've never seen a brand name or anything on them.
Where can I get those pin outs? Doing a swap from a 99 to ‘12. Cant seem to find the info I need without paying someone $50.
You can connect with me at shooshinejonnie@gmail.com.
Where did you find the pin outs for the 2012 switches
I purchased them. If you shoot me an email at shooshinejonnie@gmail.com I will send them to you.
@@shooshinejonnie okay 👍🏻
Did you put the newer seats in to
Paul, I did put 2012 seats into my 2000 superduty. You can find the video here. Thanks for watching.
czcams.com/video/i_sdbPMmjeU/video.html
Do you have video on driving door wires
I don't. I have some wiring diagrams that I used that I will share if you send me an email at shooshinejonnie@gmail.com.
You going to do the interior as well or front clip
As far as interior I have done seats, console, and carpet. I had all the rest of it as well, front clip, bed, dash, etc. I decided against doing all that and sold all of it.
There's kits for the dash. Definitely be a pain though
I'm thinking even with a kit it'll still be more than I want to deal with. It looks cool and all but at the end of the day for me it's not a good investment of time or money.
A wiring diagram would be nice
Shoot me an email at shooshinejonnie@gmail.com and I'll share what I have.
? Where do u find ur interior parts must newer parts are in insurance yards.
I found my parts from a guy that had gotten them for a swap and then decided to go a different route.
I hava1999 f350 but got the hold interior out a 2008 f150 will it work including the dash
I don't think so. Completely different cabs. You can fabricate or mashup seat brackets for seats. Seats are a few inches more narrow than superduty. The dash I can't see working. I'm sure with enough money and time you can make anything work but just because your can doesn't mean you should.
08 will work, check out mcnasty customs, sells a bracket and has a video on how to
Can you send me the wiring diagram. I got a 99.5 and the door panels I got are from a 08
I have 2000-02 and 2012-13. The 2000 should be close and I'm not sure on the other. You can send an email to shooshinejonnie@gmail.com and I'll be happy to send those to you.
Where do I find those schematics
You can connect with me at shooshinejonnie@gmail.com.
Any chance you still have your old door panels? Could a guy buy them from you? Tks
I do have the front panels. Connect with me at shooshinejonnie@gmail.com. I'm located in Western North Carolina.
I also have a grey set of door panels and seats out of a 2003 Super Duty, in excellent shape..... in Dallas TX.
What mirrors did you go with?
Mikeynuts21 I went with these in the link below. I did however swap out the amber lenses for smoked LEDs to match the rest of the truck. Overall they have been very good. No wavy or shaky glass. Nice and solid.
Thanks for watching and commenting.
DEDC Ford Towing Mirrors F250 Ford Tow Mirrors F350 F450 Pair For 1999-2007 Side Mirror Power Heated With Signal Light (Upgrade to 08 Superduty Retrofit) 1999 2000 2001 2002 2003 2004 2005 2006 2007 www.amazon.com/dp/B00VT02ZEE/ref=cm_sw_r_cp_apa_i_GhlcDbBNKR7QG
@@shooshinejonnie thanks buddy. Great video, thank you for sharing the knowledge.
@@Mikeynuts21 my pleasure.
Where is the link for the pin outs
You can shoot me an email shooshinejonnie@gmail.com and I'll share what I have. I have 2000-02 and 2012-13.
Can you send me the wiring fir the drivers door for a 2000 model
I received your email and sent them to you.
@@shooshinejonnie thankyou for the information it was a great help
@@tommybrown7499 my pleasure. Happy to help.
Emailing you about wiring diagram.
Happy to share and help.
Just sent you an email. Would love your knowledge hooking up my 2012 door panels on my 2002 truck.
Do you still have the diagram for the driver side controller ?
What year (s) are you looking for?
My truck is a 03 lariat crew cab. So far I’ve installed the rear and passenger side panels of a 2011. Just need to do the driver side.
@@BrianBeKillinEm I have 00-02 and 12. Shoot me an email at shooshinejonnie@gmail.com and I'll share them.
shooshinejonnie - Hi. I’m interested in this also. Can I shoot you an email. I have a 2000.
I have a 2013 door panels you think the wiring would be the same as a 2012
Where are you located?
North Carolina.
Did you just do your personal truck or will you install for others?
@@blkboy1124 I just did my personal truck. I've thought about following someone else's build and film a video series if they were close by.
Hi there, would you mind sending the digram?
I can do that. Shoot me an email at shooshinejonnie@gmail.com. and let me know which years you're looking for.
@@shooshinejonnie hello i have 07 f350 and a have to do the same condition with the 08 switch can you send me the diagram pls
@@AlexHernandez-nv3mg shoot me an email with what you're looking for. shooshinejonnie@gmail.com
Can u send me the wire diagram im doing same thing i can paypal u some money
Randall, I'm sorry I didn't see this post till today. I usually see comment almost immediately. Did you still need the wire diagrams? Send me an email to shooshinejonnie@gmail.com.
Where did you find the pin out diagrams? Do you have a diagram for the driver door? I’m doing the same and am totally lost on the drivers side
Originally I had someone help me out and find the diagrams for me. I do have them now and for specific years. I have 2,000 to 2002 and also 2012 and 13. If either one of these would be helpful please send me an email to shooshinejonnie@gmail.com And I'll see if we can get you hooked up.
shooshinejonnie awesome! Sent you and email