- 270
- 1 382 681
The More You Bear
Canada
Registrace 26. 12. 2013
Hey guys and girls! This is the place for helpful & informative repair videos!
If you like the video please consider liking it.
If you like the content of my channel, please hit the subscribe button. I upload new content sometimes weekly.
If you like the video please consider liking it.
If you like the content of my channel, please hit the subscribe button. I upload new content sometimes weekly.
Cheap & Easy DIY Cat Shelf! Catification (Catify) Budget Ideas! No Damage Renter Friendly Options!
In this video I show you how to build a Cat or kitty Shelf Easy & Cheap! Minimal skill or tools required!
If you have any questions, feel free to leave it in the comments below. I'd be glad to help if possible.
If you like the video or found it informative, please give a thumbs up and consider leaving a comment.
If you like what you saw please hit the Subscribe button. I post new content frequently. It doesn't cost you anything, but can make a big impact for a content creator like myself.
Thanks to all my subscribers. Without you, this video would not be possible. Keep on Bearing!
Thanks for watching and remember: You never know unless you Bear!
czcams.com/channels/juA-EvIiP10J_Jwk8UXhBA.html?sub_confirmation=
00:00 - Intro
00:41 - Meet Atticus!
01:21 - Measure Window Opening
01:52 - Cut & Prep Shelf
06:46 - Window Sill Prep
09:35 - Shelf Brackets
15:16 - Prep & Paint
17:20 - Install Shelf & Brackets
24:18 - Finishing Touches
29:03 - Will Atticus Demonstrate?
31:08 - Outro
If you have any questions, feel free to leave it in the comments below. I'd be glad to help if possible.
If you like the video or found it informative, please give a thumbs up and consider leaving a comment.
If you like what you saw please hit the Subscribe button. I post new content frequently. It doesn't cost you anything, but can make a big impact for a content creator like myself.
Thanks to all my subscribers. Without you, this video would not be possible. Keep on Bearing!
Thanks for watching and remember: You never know unless you Bear!
czcams.com/channels/juA-EvIiP10J_Jwk8UXhBA.html?sub_confirmation=
00:00 - Intro
00:41 - Meet Atticus!
01:21 - Measure Window Opening
01:52 - Cut & Prep Shelf
06:46 - Window Sill Prep
09:35 - Shelf Brackets
15:16 - Prep & Paint
17:20 - Install Shelf & Brackets
24:18 - Finishing Touches
29:03 - Will Atticus Demonstrate?
31:08 - Outro
zhlédnutí: 13 421
Video
Ford Mustang Mach E High Voltage Battery Junction Box HVBJB Fail - 2 Months to get fixed? WTF Ford?!
zhlédnutí 190Před měsícem
In this video I show you the steps (and time involved) to get my HVBJB replaced. Absolutely no warnings, no recalls, no nothing. Very frustrating. If you have any questions, feel free to leave it in the comments below. I'd be glad to help if possible. If you like the video or found it informative, please give a thumbs up and consider leaving a comment. If you like what you saw please hit the Su...
Bio Bidet FREE repair & replacement parts - How to replace toilet seat & damper fix slow close seat
zhlédnutí 891Před 2 měsíci
In this video I show you how to fix a broken slow close toilet seat on a BB2000 Bio Bidet Toilet Seat. Replacement Parts: biobidet.com/collections/replacement-seat Installation Instructions: biobidet.com/blogs/news/how-to-install-a-bidet-installing-a-bidet If you have any questions, feel free to leave it in the comments below. I'd be glad to help if possible. If you like the video or found it i...
Score A Free Tesla Supercharger Fast Charging Adapter For Your Ford EV - Easy Reservation Guide!
zhlédnutí 122Před 3 měsíci
In this video I show you how to reserve a FREE Tesla Supercharger Fast Charging Adapter in a step by step process. Reservations must be made by June 30, 2024 Canadian Customers: www.ford.ca/support/how-tos/electric-vehicles/public-charging/how-do-i-get-a-fast-charging-adapter-nacs/ American Customers: www.ford.com/support/how-tos/electric-vehicles/public-charging/how-do-i-get-a-fast-charging-ad...
NEVER do this at EV Public Charging || Do's & Don'ts of EV Level 2 / 3 Etiquette || Bad Tesla Owners
zhlédnutí 445Před 4 měsíci
NEVER do this at EV Public Charging || Do's & Don'ts of EV Level 2 / 3 Etiquette || Bad Tesla Owners
Cuba Beer Selection @ All Inclusive Resorts Gift Shop Airport Cayo Santa Maria Coco Varadero Review
zhlédnutí 429Před 5 měsíci
Cuba Beer Selection @ All Inclusive Resorts Gift Shop Airport Cayo Santa Maria Coco Varadero Review
Level 3 EV Fast Charging Issues? Charge Port Proximity Sensor Pin Bent? Ford Mustang Mach E Problems
zhlédnutí 1,2KPřed 5 měsíci
Level 3 EV Fast Charging Issues? Charge Port Proximity Sensor Pin Bent? Ford Mustang Mach E Problems
EV Home Charger Issues? Try this fix solution! Charging Problems diagnosing & Troubleshooting FAQ
zhlédnutí 798Před 5 měsíci
EV Home Charger Issues? Try this fix solution! Charging Problems diagnosing & Troubleshooting FAQ
Do Mud Flaps Splash Guards really work? Before & After comparison || Ford Mustang Mach E AOSK Result
zhlédnutí 2,1KPřed 5 měsíci
Do Mud Flaps Splash Guards really work? Before & After comparison || Ford Mustang Mach E AOSK Result
Attention EV Owners || Be Kind & Share the charger || Rewind the charging cable || Do's & Don'ts
zhlédnutí 106Před 6 měsíci
Attention EV Owners || Be Kind & Share the charger || Rewind the charging cable || Do's & Don'ts
Mustang Mach E 12v battery is dead AGAIN & vehicle BRICKED || Frustrating || Ford needs fix this NOW
zhlédnutí 1,1KPřed 6 měsíci
Mustang Mach E 12v battery is dead AGAIN & vehicle BRICKED || Frustrating || Ford needs fix this NOW
MUSTANG MACH E EV ROADTRIP 400km 250 mile London to Belleville Ontario Ivy Charge Station OnRoute
zhlédnutí 127Před 7 měsíci
MUSTANG MACH E EV ROADTRIP 400km 250 mile London to Belleville Ontario Ivy Charge Station OnRoute
Quick & Easy Mach E Mud Flaps Splash Guards Install || NO SPECIAL TOOLS REQUIRED || NO HOLES DRILLED
zhlédnutí 141Před 7 měsíci
Quick & Easy Mach E Mud Flaps Splash Guards Install || NO SPECIAL TOOLS REQUIRED || NO HOLES DRILLED
Ikea Utensil Drawer Hack - EXCLUSIVE How to modify Maximera - You never knew this was possible!
zhlédnutí 17KPřed 8 měsíci
Ikea Utensil Drawer Hack - EXCLUSIVE How to modify Maximera - You never knew this was possible!
Ikea Hack || Easy & Cheap Toe Kick Vent || Easy DIY Floor Vent Register Under Cabinets Installation
zhlédnutí 3,3KPřed 8 měsíci
Ikea Hack || Easy & Cheap Toe Kick Vent || Easy DIY Floor Vent Register Under Cabinets Installation
Ikea Garbage Recycle Bin Hack || Hallbar Bin with Lid || Sektion base cabinet with pull out storage
zhlédnutí 6KPřed 8 měsíci
Ikea Garbage Recycle Bin Hack || Hallbar Bin with Lid || Sektion base cabinet with pull out storage
The EASIEST way cover holes Ikea Sektion Pax Cabinets Variera Plugs #ikeahack #ikeakitchen #shorts
zhlédnutí 348Před 8 měsíci
The EASIEST way cover holes Ikea Sektion Pax Cabinets Variera Plugs #ikeahack #ikeakitchen #shorts
The EASIEST way to cover up holes in Ikea Sektion Pax Cabinets Variera Plugs #ikeahack #ikeakitchen
zhlédnutí 1,6KPřed 9 měsíci
The EASIEST way to cover up holes in Ikea Sektion Pax Cabinets Variera Plugs #ikeahack #ikeakitchen
You'll NEVER guess what I found living in FRUNK of Ford Mustang Mach E F150 Lightning BEWARE!
zhlédnutí 49Před 9 měsíci
You'll NEVER guess what I found living in FRUNK of Ford Mustang Mach E F150 Lightning BEWARE!
MUSTANG MACH E EV ROADTRIP 2205km 1370 mile Pennsylvania New York Tesla Magic Dock Electrify America
zhlédnutí 325Před 9 měsíci
MUSTANG MACH E EV ROADTRIP 2205km 1370 mile Pennsylvania New York Tesla Magic Dock Electrify America
Build Your Own Stylish Ikea Sektion Wine & Liquor Rack In Minutes! Quick DIY Guide
zhlédnutí 20KPřed 10 měsíci
Build Your Own Stylish Ikea Sektion Wine & Liquor Rack In Minutes! Quick DIY Guide
How to strip Copper Wire quick & easy to make top MONEY! Wire Stripping Jig Device Machine tool free
zhlédnutí 290Před 10 měsíci
How to strip Copper Wire quick & easy to make top MONEY! Wire Stripping Jig Device Machine tool free
Dead Ford Mustang Mach E 12 volt battery? BCM replacement Electrical System Drain Service Required
zhlédnutí 2,3KPřed 10 měsíci
Dead Ford Mustang Mach E 12 volt battery? BCM replacement Electrical System Drain Service Required
How to install AOSK Window Louvers (Louvres) Scoops Grilles Gills Covers Ford Mustang Mach-E
zhlédnutí 497Před 11 měsíci
How to install AOSK Window Louvers (Louvres) Scoops Grilles Gills Covers Ford Mustang Mach-E
How to install Ikea Enkoping Deco Strip quick easy professional results! What Ikea doesn't tell you
zhlédnutí 11KPřed 11 měsíci
How to install Ikea Enkoping Deco Strip quick easy professional results! What Ikea doesn't tell you
Ikea Sektion Kitchen Cabinet Tips and Tricks for easy & professional installation
zhlédnutí 214Před 11 měsíci
Ikea Sektion Kitchen Cabinet Tips and Tricks for easy & professional installation
Ikea Sektion Corner Sink Cabinet Hack Modification Quick and Easy!
zhlédnutí 22KPřed rokem
Ikea Sektion Corner Sink Cabinet Hack Modification Quick and Easy!
Ford Mustang Mach E F150 Lightning Dead 12v Battery Diagnosis - Electrical Drain Security Alarm Code
zhlédnutí 1,1KPřed rokem
Ford Mustang Mach E F150 Lightning Dead 12v Battery Diagnosis - Electrical Drain Security Alarm Code
American Villa Porcelain 6"-in x 12"-in Herringbone Black Veined Floor Wall Tile Review
zhlédnutí 260Před rokem
American Villa Porcelain 6"-in x 12"-in Herringbone Black Veined Floor Wall Tile Review
Great vid! I did the same but with 1 1/2” x 3/4” wood strips, painted white and screwed in at the bottom of the side slopes. Even painted over the screws and you can barely even tell its been modded 🤘🏼
The 'SHOW-BOAT'! LOL. OR 'S-HO'...great video.
Bless you for caring about Atticus enough to give him window time without hurting himself to get there. Hope you all have many more years together. Nice job.
Thank you so much for the kind words. I hope he is around for many years too. Please like and subscribe as it really helps me as a creator. Thanks for watching!
Hello good morning this is Darryl Patton from Grand prairie Texas I have a 2012 Ford Taurus the cross-traffic system fault turns the air conditioning off and turn the heater on is there a way that I can get rid of the cross traffic sensors I'm in my 60s so I'm used to looking in my mirrors to back out so I don't need that
Hey Darryl. Unfortunately I am not familiar with your concern. I do know that disconnecting components and devices does not make the PCM (or brains of the vehicle) happy. The only suggestion I could make was disconnecting the 12v battery and letting it sit for an hour or so and reconnecting. This will reset all the computers and may help. Hopefully someone here could answer the question? Thanks for the question and for watching.
Taking up 2 chargers ? WTF
No. I was on the end, so only taking 1 spot. Thanks for the comment and for watching!
This is one of those things where there are a lot of right answers, and it's all a matter of taste. In my kitchen, I put them on "backwards" so the visible parts are square and that beveled edge is hidden. The face of the deco strip is even with the face of the doors, no reveal as here, with the end panels to the top and bottom of the deco strip. That goes better with my Tistorp slab front doors. Easier too! Though I might do it the way you are for shaker-style doors. Another tip - in a section like this, it will look better if you put a cover panel on BOTH ends, rather than having the cabinet right against the wall. You don't need to use a full panel, just a strip that you cut off one of the ones that shows to fit it to the wall, as long as it has a factory edge. Looks MUCH better with the symmetry.
Those are some great tips and insight. Please like and subscribe as it really helps me as a creator. Thanks for sharing and for watching!
It’s really hard to get it mixed up properly.
It can be tricky to properly mix and incorporate the sulphur on larger doses. Be persistent. You could even mix it u and let sit for an hour or so then mix again. Please like and subscribe as it really helps me as a creator. Thanks for the comment and for watching.
hi, for the filler pieces for the 18" door. in order to center the door i would use 4 filler pieces in total correct (2 pieces on each side)? how thick are the filler pieces and would having 4 filler pieces impact the usability of the door or the hinge? thanks
Yes, that is correct. The filler pieces are 5/8" thick each. Using 2 filler pieces would not impact the hinge (hinges are designed to work down to 0 clearance). Please like and subscribe as it really helps me as a content creator. Thanks for the question and for watching!
So having 2 filler pieces on the hinge side and 2 filler pieces on the opposite side would not impair the hinge or door closing right? Also which hinge did you use? Thank you!
Well done. I’ll be doing the same to my sun faded breaker box soon
Let me know how it goes! Please like and subscribe as it really helps me as a content creator. Thanks for the question and for watching!
Dang! My old E150 just remove 4 bolts. No more than 5 minutes. Progress! I thought this was candidate for camping in. Nope!
I think its still possible, just need to account for the time it takes to remove. The seats do fold flat, so you could always sleep on top of that. Please like and subscribe as it really helps me as a creator. Thanks for watching and the comment!
Thanks for this video. I couldn't get a socket on there, but I was able to use PB blaster and an adjustable wrench to get one off. Didn't have luck with the other. Its looking like I need to replace the caliper bracket at this point. Thank you for sharing this video and being detailed with what you did as it did give me something else to try along with cleaning out where the caliper pin goes.
That pin should come out. Lots of penetrating oil, maybe some heat and some muscle, that thing is coming out. Glad the video helped. Please like and subscribe as it really helps me as a creator. Thanks for the comment and for watching!
Well its been 2years, how are they doing? & How many miles have you had on these? Really thinking about getting some here soon for my SUV 😁 let me know please
The car is gone now, but I had them on for a year and half. Little bit of brake dust. Very pleased with them although I think the ATE rotors were better. Please like and subscribe as it helps me as a creator. Thanks for the comment and for watching!
I took out the 2nd row of seats and 200 pounds if not more is indeed facts. Im trying to take out the 3rd row now to build a speaker box that goes from the tailgate to the back of the front seats with 8 18" Sundown Audio Zv6 subwoofers.
That sounds amazing. Keep me posted. Please like and subscribe as it helps me as a creator. Thanks for the comment and for watching!
That’s what I’m here for, looking to take out the seats for a subwoofer box. I’m just using 2 18s tho possibly a band pass box
@@StrawHatLuffyYoHoHoHo I have a video on my subwoofer and amp install. czcams.com/video/f52t_mbrKrw/video.html I'd be glad to share any info or answer any questions. Let me know how it goes. Please like and subscribe as it really helps me as a creator. Thanks for the comment and for watching!
I’m worried there isn’t some kind of flare on the end, how is it holding brother
The remaining steel lines are fastened in place (oem body mounts, clips etc). They are very rigid, and cannot move or spread apart more than a few inches. As a note, more then half of the OEM line is rubber. All I can say that it lasted 2 years with no issues. Please like and subscribe as it helps me as a creator. Thanks for watching and the comments!
sits way to high on my head and I can't stand it.
There is adjustment in the headband (higher and lower setting) which is explained in the video. Please like and subscribe as it helps me as a creator. Thanks for the comment and for watching!
Came here to say the same thing
@@krispykream6649 There is 2 height settings. Thanks for the comment and for watching.
Mine is being worked on right now at my local dealership, they had to bring in a welder to modify their hoist to be able to drop the battery out. I should have it back tomorrow. Been there 5 days now.
I wasn't having issues, just got the notice that parts were available to get the job done, finally lol
Glad to hear it's working out ok for you. Keep me updated! Please like and subscribe as it helps me as a creator. Thanks for the comment and for watching!
Mine is a 23 which is supposed to have the updated junction box. Not sure how much it’s updated as my 23 is at the dealer with 1750 miles on it and a month old with a bad junction box. Been there for 4 days so far and was told it’ll be another 3-5 days till they get the parts. Kinda scared to drive the car when I get it back as if it only lasts a month from new doesn’t say much about its longevity. Bought to save gas money too as I drive 100-150 miles daily and am now driving a 5 year old edge loaner that gets bad fuel mileage 😞
@@jimhimesjr I share your pain, frustrations and skepticism. I will say that my Red Mach (Darth Maul) is 2 years old now. With everything being said, I'd do it all again. Let me know how it goes. Please like and subscribe as it helps me as a creator. Thanks for the comment and for watching.!
@@MoreBear will do for sure. The dealer gave me a 24 select awd big battery to use while my car is in the shop so that helped brighten my mood. Interesting comparing it to my gt performance. I asked if they had a lightning to try and they were gonna give me one to drive but they sold it the day before so I ended up with the 24 mach e. Really happy with how the dealer has treated me. I really like the Mach e. Hoping it works out
Mine isn’t clicking into place , even seems like the pieces don’t fit. PLEASE HELP!
They may not make a "click" sound, but as long as they cannot me pulled out, they have been installed properly. Please like and subscribe as it helps me as a creator. Thanks for the comment and for watching!
Hello! My contractor is installing this exact tile. He’s running into an issue where soft edge on the top/bottom meets the hard edge of the sides causes inconsistent thickness in grout lines?
Honestly, I didn't experience that on any tile. I did have a few with chipped corners, and 1 that wasn't fired properly (glazing was defective). I would suggest taking them back if the contractor is having issues laying them with consistent grout spacing. Might be a bad batch/lot. Let me know how it goes. Please like and subscribe as it helps me as a content creator. Thanks for the question and for watching.
Ok thank you!! It was an issue with the size of the tile making it difficult/impossible to lay a perfect herringbone pattern. Can I ask what size spacers you used?
@@jjvr.-. I used 3/16" spacers. Not too small, not too big (IMHO). Please like and subscribe as it helps me as a creator. Thanks for the comment and for watching!
Thanks for this video. Exactly what i was looking for
No worries. Hope it helped. Please like and subscribe as it really helps me. Thanks for watching and the comment!
Shows nothing
Is there something that I could do to improve? No worries. Please like and subscribe as it really helps me. Thanks for watching and the comment!
Would have been good to show set and instructions for this!
@@chrysn2196 I will keep that in mind for the future videos. Please like and subscribe as it helps me as a creator. Thanks for the comment and for watching!
Really helpful. I’ll tackle mine this summer.
A little time, patience and some materials and you got this! Hope it helped. Please like and subscribe as it really helps me. Thanks for watching and the comment!
Do you know how to do this for a 2007 Lexus is250
The process will be the same for any vehicle. Let me know how it goes. Please like and subscribe as it helps me a lot. Thanks for the question and for watching!
Awesome.
Hope it helps or inspires you. Please like and subscribe as it helps me a lot. Thanks for the comment and for watching!
Hi are the drawers to the right functional? And if so how did you install them?
Great question! yes, they are functional. That is where my garbage and recycling bins live. I have a video here: czcams.com/video/9I-htXQ2CW8/video.html Please like and subscribe as it really helps me . Thanks for the question and for watching!
How do you do this if the Cabernet is already there
Great question! Without knowing the layout of your house, I would start with removing the toe kick to see what is under there and how much access is provided. I would then go below this area and see if there is access. Let me know how it goes. Please like and subscribe as it really helps me . Thanks for the question and for watching!
First, you drink the Cabernet. Mmmm. Problem solved?
@@Josh_OfAllTrades No, that's this video I made for a wine cabinet! czcams.com/video/kxJHLAWlgLg/video.html Please like and subscribe as it really helps me as a creator. Thanks for watching and the comment!
@@MoreBear I liked... I'll trade you subscribes lol I need more too
@@Josh_OfAllTrades I subscribed. I like your content. Juts post videos at least every month. Be patient: some videos take years to start getting consistent views. Took me 3 years to get monetized. A promotion would help too and this video helped me: czcams.com/video/IPBDU52ca80/video.html
Not helpful.
Maybe I can assist you. Could you tell me why? Thanks for watching!
And this is why we get gas cars with phsyical handles kids
Thanks for the monetized view!
How come? Do you have any accessories that drain the 12v battery?
@@zap1486 I used to, but not for some time. It's because the 12v battery is about 1/3 the size of an average car battery. It has not capacity or reserve. Hope it helped. Please like and subscribe as it really helps me. Thanks for watching and the comment!
both piece of shit cars
great instructions, a much needed video for what seems like the simplest task but wasn't lol - thanks!
I know, right? Glad to assist. That's what my channel is about! Please like and subscribe. Thanks for watching and the comment!
I just had the same thing happen to me thank you
No worries. Let me know how it goes. Please like and subscribe. Thanks for watching and the comment!
Thank you!!!
No worries! Please like and subscribe. Thanks for watching and the comment!
My transmission lines want come off and I’m changing transmission so is it ok if I cut mine and piece it back together with rubber fuel line
It is, but if you are going through the effort to replace the tranny, I'd buy new factory lines and replace IMHO. Please like and subscribe. Thanks for watching and the comment!
Thanks for the great video! We're currently renovating using this same approach with the Sektion Ikea corner cabinets, and I'd like to know if you think we can squeeze in a 32" sink in vs. a 31". I saw the note on your overall sink size being 31" x 18" x 9" deep, but the fireclay one we're looking at is 31-7/8 x 18-7/8" x 10" deep. Thanks again!
Honestly, probably will. Just make a template of your sink and play around with it in the corner cabinet. You will need to trim some space on the cabinet sides, but I think it will work. Please like and subscribe. Thanks for watching and the question!
@@MoreBear Thanks so much for the reply. We made a template as you suggested, and yep, the only way it would fit is if we cut into the sides. However, it would have created too much of a distance from the front of the countertop to the inside edge of the sink, requiring us to bend over, and our backs would have paid the price, so we returned the 32" for a 27". Though it's not as large of a sink as we wanted, it will be more ergonomic once installed. Thanks again. You're a wizard at what you do. Cheers!
The relief line that’s usually on pads is to help the pad actually flex so it doesn’t crack right?
I thought it was for heat expansion and dust relief. Please like and subscribe. Thanks for watching and the comment!
Thank you!!! Saved us a bunch of time and headache. We had a more simple set up, but this was a super helpful!! Our kitchen set up is super basic compared. We put the deco strips on the top of the cabinets before actually hanging them as we did not have any corner cabinets and just straight edges. Worked ok, as our ceiling is super wonky, in an old house, and not at all straight so we had to hang about 5/8 gap below the ceiling. Looks decent enough. Cheers!
Thanks for sharing. Please like and subscribe. Thanks for watching and the comment!
I replaced all my original rotors and pads with Brembo UV rotors and ceramic pads. Dead quiet and performance is solid.
That's great to know. Thanks for sharing. Please like and subscribe.
Next time try a battery booster to boost start on the jump starter post, open the door and start the car within 10 seconds, once dc dc is on, at least you can drive until car is off. Learnt in a hard way with f150 lightning, but the f150 12v has bms issue, battery itself was fine
I have some other videos demonstrating the battery booster method. Thanks for the comment and for watching!
My cat is 20 years old , still acts like a kitty , he jumps on and off the bed with ease , I’ll try these suggestions
It helped my cat a bit. Sometimes he still uses the conventional box. I will have a Cat Window Shelf video coming soon, so please like and subscribe. Thanks for the comment and for watching!
Hi, thank you for the great video, it has helped me a lot with planning the install of the kitchen cabinets, my question is, how far down from the ceiling did you mount the hanging rails, in order to leave enough room for the moulding on top of the cabinets?, it looks like you left a small gap between the the top of the moulding and the ceiling, how much gap did you leave?, please let me know when you can,, thank you,,,
Great question. I have 8' (96") ceilings, so the bottom of the hanging rail was mounted at 92&3/16". Please refer to your Ikea cabinet installation instructions. I also have a video on how to install the Ekoping deco strip at the top. Please like and subscribe. Thanks for the question and for watching!
holy rust batman
I know, right? That's 10+ years, 300,000km and a crap ton of salt and brine from these Canadian roads. Please like and subscribe. Thanks for the comment and for watching!
Please like and subscribe. Thanks for the question and for watching!
Thanks for the professionally prepared video. You are fortunate that you were replacing the seat damper. My damper was fine but the seat had its finish worn off and it was a horribly brown stained mess. The 3 screw damper you removed holds the seat in place. I scratched my head and said bad words, then I removed the damper and got the seat off. Dunno if you want to re-edit your video. Hopefully folks in my situation will read my comment. Thanks again. (Mine was not as cooperative as yours)
Thanks for the clarification. Unfortunately at this point I can only remove sections of video, not add. People will see the comments here for sure. Please like and subscribe. Thanks for the question and for watching!
exhaust set up if you remember
It was a Borla cat back system that sounded AMAZING! It was designed specifically for this vehicle by Borla, not just a muffler that you strap on. I have some more info in this video: czcams.com/video/HhHgLVlCH90/video.html Please like and subscribe. Thanks for the question and for watching!
@@MoreBear appreciate you so you had straight pipe from cats with borla mufflers what size tips did you have ik you said it came with you
@@jaytv3236 They were 4" tips!
I have a lease, but I really want these. Having trouble finding out how hard it is to remove it. How difficult do you think it would be to remove at the end of the lease?
I honestly don't think it would be that hard. I have a video here that would assist you: czcams.com/video/dDlNlSV4jrw/video.html The louvres are mounted on the glass so a razor blade would remove the remaining tape. Please like and subscribe. Thanks for the question and for watching!
dont watch this video, no help.
I'm sorry to hear that. What can I do to improve the video? Thank you.
@@MoreBear because, Ford service dudes found and solved your error. How will one know , that the charge pin is bent and this is the reason that the charging is not starting. I came to this video , to be able to see the probable causes , one as a driver can look for in their mach e, on their own.
thank you for not dethatching your lawn on video
Thanks so much for watching!
You seem very nice but this is a useless video. It’s just watching you roll on paint… like, we all know how to do that.
Honestly, some people don't know how to roll paint. Some don't know that paint can be rolled onto a steel garage door. The point of my channel is to give confidence and information to the common home owner. People are more capable then they know! Thanks for the comment though and for watching!
My 2010 says check rear park aid. It popped up on the dash not long after the speaker stopped working. I havent replaced it yet. Right now my 2010 has a parasitic draw thats running down the battery.
This video will assist you in fixing the parking aid error message. Good luck with the other issue. Let me know how things go. Please like and subscribe. Thanks for the comment and for watching!
What I find irritating is that the hvac auto button doesn't turn off the climate control. You would expect press for level 1, another for level 2 and another for level 3 then a final press to turn off... Nope to turn off you have to tap the icon that gets you to the hvac settings and then tap off. The other annoyance which is software is that ford hasn't implemented like a camping mode as tesla, which would be useful when waiting in the car.
I much prefer the original software and controls. It's so much harder to change the temperature or fan speed now. Please like and subscribe. Thanks for the comment and for watching!
What I find irritating is that the hvac auto button doesn't turn off the climate control. You would expect press for level 1, another for level 2 and another for level 3 then a final press to turn off... Nope to turn off you have to tap the icon that gets you to the hvac settings and then tap off. The other annoyance which is software is that ford hasn't implemented like a camping mode as tesla, which would be useful when waiting in the car.
I much prefer the original software and controls. It's so much harder to change the temperature or fan speed now. Please like and subscribe. Thanks for the comment and for watching!
Is there some clever way to take them out?
Not that I'm aware of. Me personally I would use a utility knife (very carefully) or a small fine tip flat (slotted) screwdriver. Please like and subscribe. Thanks for the comment and for watching!