Video

I have done some of these things myself

Muy buen trabajo. Muy bien explicado y mostrado a cámara. Excelente proyecto para construir!!!

This is the most reasonable approach I have found. Other videos are like “go spend $500 on plastic organizers so everything is “prefect”

Gosh, I’ve been trying to figure out the same thing on my 78 gmc pickup and guess what, I checked the fluid all the time, said it was full. But my dipstick is completely missing that cap, so the dipstick is not even sitting in the right position at all. Gosh, really unfortunate you have basically confirmed that my transmission is burnt up. Thanks! Side note, I very much appreciate the video, if I rebuilt it, I would have never even realized the dipstick issue haha thanks!

Those primers are almost $10 at Home Depot now 😁

Greatly Appreciate Your Honest Review!

Could you turn a40 inch circle

Excellent discovery work. Sometimes as simple as that.

or maybe its the fan

I love wind

I noticed the cap on the dipstick was loose and repaired it but the seals are all shot. 😢

Hey! I think I spotted a HAMMER in your shop! You! de KG6JE

I like and believe in the common sense approach rather than the Instagram worthy approach. Well done.

you did not show us your product at work ? How can we trust your product might work

Great video. This has been my life's goal this year to get better organized with my tool boxes. I bought some cheap multi size interlocking toolbox organizer trays and it has helped me tremendously.

man they have increased in value 549 without tax now

Thanks for the video! Bottle label suggestion: placing a piece of clear packing tape over the writing will help protect it from the alcohol.

Half quart low won’t hurt a thing

Good Stuff!

I built these and I absolutely love them. Thank you

I enjoyed your video. I may build something similar. I think it important to eliminate any side load on the jack's piston, it was not engineered for that. I think you said that you might add a metal strap , to prevent outward movement of the slide, this is the way to go as it would eliminate side load on the jack's piston. I would also elongate the jack positioning hole, to ensure that all side load is not against the jack's piston. Thanks for sharing.

0.019" runout? Such is precision machinery from China. China can't even produce steel that can hold up under machine precision tolerances. I've got one question: Why does China have 17,000 miles of bullet trains, and America has none?

Ive been looking for ideas to better organise my box and something just dawned on me. All the videos about this are from Americans (or perhaps Canadians). It took me ages to realise why but now its so obvious. You guys have to buy twice or three times as many tools as the rest of the world as you have to have various imperial units. It must suck for my mechanic/engineering colleges across the ocean. Still enjoyed the video, interesting to see a 'good enough is enough' approach

I need that exact handle where can I find one or name of jack

I've had the chance to use this table a couple of times now. It's fun to whip out in front of people:) I can see what people are talking about when they say the legs are delicate, but they're design to support a "mostly" vertical load, not be torqued from the side or pushed back into place. If you just let the table open or close on it's own and don't force anything, it works great czcams.com/users/postUgkxyFZUPFEey-PuqsPMxqaykBhgA1LWxFHh Once it's set up, it's pretty solid. My only gripe would probably be related to the clamps provided. They're not the highest quality. They do the job, so no big deal, but they could be better. All in all, pretty cool gadget.

really like the design. Simple, but covers all of the bases. Found this as I was thinking about wheel cribs, and I'm looking to use up a bunch of scrap wood as well. Thanks for the video!

did you take the cut list down?

I have well over 10,000 miles on my trailer. Last summer a bearing seized and made the tire blow which then ground the rim down. I always way over load the trailer so all that heat sent the rim sparking across two lanes of traffic on rte76 into the divider and straight up in the air with a tail of sparks. Ti make a long story short I was able to get it home by taking another axle from a welding trailer I was building and replacing the 1,500 pound axle on the trailer. Later I replaced the axle with a 4,500 pound axle and it was the best thing I ever did for it. I wil be closing the c channel off with welded steel to strengthen the tongue and front frame of the trailer.

Can you do this to every drawer? Same amount of magnets?

Good job. Thanks to show

Smoked em 🥺

I gotta say every time I see someone use a dial caliper in a HF Tool I just laugh

I can't believe this is a 6yo video. I bought one of these a few days ago and its as if he is talking about mine! The slope on mine is so bad that the bar stock trying to slide out has enough force to pop the C-clip off trying to keep the roller in place 🤦‍♂️ zero progress.

Ok mine want go in reverse but I do have forward what should I do?

Pay attention to chuck speed. the Slick Stick lubricant that Hougen suggests to use is in a solid form like wax. I just pack the interior of the cutter and some on the outside and boy do they cut.

Typical horror freight tool.

Great review. I was wondering how it would last. Thank you.

My first one burned up on dixie fire. Have a new one now. Old one went over 25000 miles and still like new.

That’s a topic well covered

I’ve been searching “how to organize tool chest” videos and this is one of the best ive seen. Of course everyones most used tools are different but this gave me some a good ways to structure my tool chest. Thanks for sharing!

Of all of the designs that I've seen on CZcams, I like yours the best. I do have two questions though, first, how did you fasten the angled wedges? I'm guessing from underneath. Second, it seems to me that all of the car's weight is on the 1/2-inch plywood. Shouldn't there be an upright two by 4 or 6 under the center of the plywood for safety's sake?

Nice presetntation! How dod you attach the angled wheel stoppers? Thanks

Is it available in india / Amezon

Hello R.J. you can buy replacement cutters from M & R machine tool for your Hougen annular set. There very reasonable in price. Enjoyed the video. Good luck, Bill

@R.J.'s workshop Love the video, but is there a ring roller that you do recommend?

Excellent video Great presentation An organized box is necessary. The pretty boy toolbox organization is nice when you're showing off. Being in the trade so long, I would run out of garage space to organize the tools that percisly. Retirement has been a curse. I want everything to be neat, but I don't need all the extra tools. Thanks again

In my road box its hard to organize pliers

Great video R. J., thanks for sharing your build! I'm the same way, I can buy all the tools I need, but I'd rather utilize my tools and build it myself, plus, I know it'll be engineered and made much better. I'll be moving my metal lathe, so... I did subscribe as well. Tight lines always!

Sir ,Is Aluminium paint is resistance with water.That is it will bear the water resistant. ~

Can you put a 2000 lb car on it