Video

No better option!

Luxx is FAR better, but the Pro will suffice with LED bulbs. Luxx is as good or better than alot of OEM LED headlights.

@@TheJimmysGarage also is the white brightness on the daytime running lights the same on both or does that change?

@@Ebk1988 if you use the supplied DRL harness the white is brighter.

@@TheJimmysGarage nice I just meant is the luxx brighter than pro series or are they the same when it comes to the drl white bar

@@Ebk1988 THeyre the same lights. Just one has a OEM quality LED beam and the other is halogen.

The only difference in this setup is that instead of a traditional receiver, you now have a black box.. same connections as any receiver. I then bought a single din plate to block off the hole in the glove box- amzn.to/3xHdUAS

Interesting, I do not know what would cause that. What happens if you dont have oil in the tank and run premix?

It's in the description but here is the link amzn.to/3J54r8A

Thanks!

That's correct, luckily pulling them out is just 3 screws. It took me probably a half hour to get them aimed perfectly.

Tapped the running light wire that goes to the running light bulb in the head light, same for blinkers.

It came on the truck I wish I could find it online but I don't see it anywhere

Mirrors - amzn.to/49rr3Lb

Sweet thanks! How hard was it to install the head lights I have the same truck and I am looking at buying them.

@@7.3power I followed this guide, plug and play if you use the adapters in my description. www.riffraffdiesel.com/content/RESOURCES/Riffraff_Diesel_05-07_Headlight_Instructions.pdf

Sweet thank you!

I got it when the video was posted, August 8, 2023. It was from my Moomba Dealer, Club Royale Boat sales. 248.681.9100. You can even mention that you want the same engine tray that Jimmy got for his 2014 Mojo 2.5. This is the part # 119402 from Moomba.

The upper projector is the Hi and Low beam. The lower projector is just a running light with very low power led bulb.

I used these - amzn.to/48JEDdw and didn't have to do anything with blinkers, was all plug and play.

For the running lights to stay on when the truck is switched on I tapped fuse 8.

@@TheJimmysGarage that's so weird in an 02? I had to splice the newer plug from my harness to fit i got that figured out i was just left with the running lights so thanks dude!! I'll probably come back to this whenever i get around to my roof lights cuz mine don't work rn and seeing yours do the start up flash is sexy 😂😂

@@UnMeDiKaT3d So with the plug and play harness from amazon you still had to splice your headlights in?

@@TheJimmysGarage ya at least the blinker plug i did it was way different than what i got with the headlight assembly i thought that was weird considering both our trucks are 02s lol

Thanks!

There is nothing to tap for that, when you turn your headlights on they the do the startup sequence. The pro series does not do this, it must be Luxx series or Nova Series

Hey, I didn't tap anything but the running light wire to switched 12v.

Interesting thanks, yea I haven't touched the bike other than ecu, so the dealer set it up wrong I guess?

Should join us!

I was there 😂

Always a good time, Baja was awesome!

Yes I installed myself. What boat do you have and what area are you in?

@@TheJimmysGarage 2014 moomba mondo

@@TheJimmysGarage sorry Brighton

@@hkycoach9616it's a pretty easy install on that boat. I'm in Royal oak, but if you have the factory Sony radio it's an easy install. Club Royale in Waterford could install it mentioned my name or show them this video.

How did you attach the controller to your boat?

Cab lights are just smoked lense - amzn.to/3J54r8A and then I am running the brightest bulbts around from deautokey.com/

Mirrors - amzn.to/49rr3Lb and I changed the side markers out for - after some trial and error these last - amzn.to/3J3Zb5i

Haha that's pretty funny, alot of young people own these and chargers around Michigan.

@@TheJimmysGarage man I live in Delaware and it’s mostly old folks with em and they drive em as if the riding beach cruisers

Yes the black box IS the radio. The screen/controller is basically just a "wired remote"

All the stereo connections are made to the black box.

Yea we struggled with it, we had a pillow but it ripped the wing off some of the auto world cars

Hey the truck in the video is a 2002 just have to dremel some of the plastic core support to fit.

They are amazing, no better option for these trucks.

@@TheJimmysGarage I was going to do a nose swap 2015, not anymore. I love the look of the smaller grill and those lights together. you definitely know it’s a Ford front end but it has that little hint of a second GEN look to it.

Thanks!

Right back at you!

Thank, I appreciate it!

I have yet to have anyone bring over a tyco HPX2 yet but I would love to see one. So far the Viper V1 Spec and the Viper V1 alky funny car have been the fastest. We have a few of the Life Like T-Chassis which are some of the faster mass produced cars forsure! Mega G+ seem to just be very normal cars but they have very nice bodies! The Scalextric micros for the money come very close to the Viper V1 Spec cars in this short 13 foot strip.

I haven’t been involved with drag racing HO cars for a while. I got a renewed interest because I have a young son now and it’s easy for him to control the cars then on my road course. I was at the point that I was winding my own pancake motors for Thunder Jets and doing full drag builds. We had a full scale quarter running 24 volts. No timing just lights. It was fun. I feel myself being drawn back in. I will post a link to two cars I built a while back. I will check out the Viper cars. I’m not familiar with those.

czcams.com/video/um7_X2Dtu8I/video.htmlsi=uwY_1mp8vL3-7sKB

czcams.com/video/yzWW12uQad0/video.htmlsi=p5f1emX6kIyAogXe

@@Dyno05 Sounds like a sweet setup! Yes we run 22 or 24 volts on this track, the cars run great. The Viper cars are great, USA made. My Alky Funny car from Viper is a 2.4ohm arm car.

amzn.to/49aUC46 and you just redrill the holes.

Yea here is my power setup! czcams.com/video/99QlMXtLxIE/video.html

For the running light wire tap you need to find a fuse that is 12v switched power only with ignition on. I believe I tapped mine into the radio fuse which I think is fuse 8 but mine is an 02. It sounds like a possible issue with your conversion harness that converts 04 to 05 wiring, you may have to swap a pin or something, the high beams use the same bulb but they open a cut off shield that gives more light on the road, so there isn't a second bulb for High beam rather when you flick your high beam a solenoid is activated to give more light on the road. The solenoid is mechanical so you should hear in in the headlight. As for flickering it could be a bad unit.

Would you be able to send me a link to the 99-04 to 05-08 harness you purchased?

@@1372513725 amzn.to/48JEDdw

Yep! I received the same pigtails you sent me the link to, and everything is working as desined. Thank you for your time and help!

Great news@@1372513725

www.corvetteforum.com/forums/ask-tadge/4131078-answered-zr1-vs-zo6-exhaust-system.html

Hmm you may be on to something about their size! But man what a good cheap drag car haha.

Thanks! It's gettin time for a real track timing system!

They lights are plug and play, they utilize the factory blinker signal to initiate the orange. The white comes on when running lights come on. There is an additional tap for a brighter white running light that is optional but I did connect this to 12v ignition so even in the day time I have the white light on. I would think if you swapped the blinker wire with the running light wire and run orange all the time.

Will do! They are a ton of fun, thanks!

czcams.com/video/cHzLhsUH7Cc/video.html&lc=UgyWszfj9Ez7ggcKcJp4AaABAg

Handkraftd is the brand

Underrated comment for sure. I agree it would top it off

You dont need to light up the whole damn word for God sake. There's such a thing as too many lights