Wet Sounds WS-MC-1 review installed in my 2014 Moomba Mojo 2.5
Vložit
- čas přidán 27. 08. 2024
- Quick little review of my Wet Sounds WS-MC-1 4 zone Bluetooth Marine media center. Installed in 2014 moomba mojo 2.5.
I also purchased the MC-TR-Mini transom remote to replace my old Sony. This required me to also purchase the MC-TR-MINI-ADP.
I also needed the MC-MD EXT cable to run the Helm controller around my bow.
Wet Sounds MC1 Radio - amzn.to/3uBr9Ss
My subwoofer- amzn.to/49rfLHW
Single DIN block off plate for the glove box to fill the hole of old radio - amzn.to/3xHdUAS
Thank you for the fast reply and the video, I’m kinda stupid when it comes to stereos amps, receivers etc. it looks like this is going to be fairly simple and cost effective. I’m gonna order one. Thanks again
Right on! Exactly what I needed to hear. Will be my next upgrade
You will love this radio!
I’m looking for a stereo upgrade on my 2012 moomba mojo. It looks like this might be the best option, but two questions.
1) does it completely eliminate the receiver in the glove box?
2)do you connect the black box to the original equipment easily or does all that need to be redone also?
Thanks in advance
The only difference in this setup is that instead of a traditional receiver, you now have a black box.. same connections as any receiver. I then bought a single din plate to block off the hole in the glove box- amzn.to/3xHdUAS
do you HAVE to add the black box to in order to have installed?
Yes the black box IS the radio. The screen/controller is basically just a "wired remote"
All the stereo connections are made to the black box.
did you install yourself. if so do you offer install service locally
Yes I installed myself. What boat do you have and what area are you in?
@@TheJimmysGarage 2014 moomba mondo
@@TheJimmysGarage sorry Brighton
@@hkycoach9616it's a pretty easy install on that boat. I'm in Royal oak, but if you have the factory Sony radio it's an easy install. Club Royale in Waterford could install it mentioned my name or show them this video.
How did you attach the controller to your boat?