Slicpartna
Slicpartna
  • 74
  • 428 722
(OBS Chevy) Painting Exterior Parts (Ecstasy Orange Pearl)
Painting Chevy OBS hood, front fascia, side mirrors
Paint Color: UreChem Ecstasy Orange
zhlédnutí: 21

Video

Review of the VEVOR Inflatable Paint Booth (29.5x19.7x13 ft)11:16Review of the VEVOR Inflatable Paint Booth (29.5x19.7x13 ft)
Review of the VEVOR Inflatable Paint Booth (29.5x19.7x13 ft)
zhlédnutí 91Před měsícem
VEVOR Inflatable Paint Booth 29.5x19.7x13 ft Spray Paint Booth, Powerful 1100W 350W Blowers Inflatable Spray Booth with Air Filter System, Car Paint Booth for Car Parking Tent Workstation
(OBS Chevy) wet sanding primer before paint13:21(OBS Chevy) wet sanding primer before paint
(OBS Chevy) wet sanding primer before paint
zhlédnutí 2,2KPřed měsícem
wet sanding the primer before paint music: Ikson Is It Song by TELL YOUR STORY music by ikson™ Link: ikson.com/tell-your-story
How to bodywork and prime a car or truck at the house (OBS Suburban)13:02How to bodywork and prime a car or truck at the house (OBS Suburban)
How to bodywork and prime a car or truck at the house (OBS Suburban)
zhlédnutí 515Před 2 měsíci
How to paint a car or truck at the house
Bodywork OBS Chevy Suburban15:22Bodywork OBS Chevy Suburban
Bodywork OBS Chevy Suburban
zhlédnutí 109Před 7 měsíci
starting body work on LS swap OBS suburban music: ikson escape
LS 383 Build (engine finally broke in and tuned)8:18LS 383 Build (engine finally broke in and tuned)
LS 383 Build (engine finally broke in and tuned)
zhlédnutí 440Před 9 měsíci
Engine is finally broken-in and tuned
LS 383 stroker first startup mild cam25:38LS 383 stroker first startup mild cam
LS 383 stroker first startup mild cam
zhlédnutí 1,7KPřed rokem
filled cooling system primed oiling system Track: Ikson - AM [Official] Music provided by Ikson® Listen: • #108 AM (Official)
LS 383 fuel injectors (benefits of having your fuel injectors cleaned)19:55LS 383 fuel injectors (benefits of having your fuel injectors cleaned)
LS 383 fuel injectors (benefits of having your fuel injectors cleaned)
zhlédnutí 162Před rokem
detailed information about having fuel injectors cleaned especially when the engine will be down for a long period of time music: IKSON (Love)
installing LS 383 in custom OBS suburban15:21installing LS 383 in custom OBS suburban
installing LS 383 in custom OBS suburban
zhlédnutí 473Před rokem
installing LS 383 in custom OBS suburban Music | "It will be ok" by LiQWYD Watch: czcams.com/video/tl_pB2r90bA/video.html License: www.liqwydmusic.com/how-to-use Download/Stream: hypeddit.com/link/4qh2ja Music | "I Need You" by LiQWYD Watch: czcams.com/video/F8ioaRUlh2g/video.html License: www.liqwydmusic.com/how-to-use Download/Stream: hypeddit.com/link/lp88yc Music by czcams.com/users/ikson Love
How to build a LS 383 from a 5.3 (fuel pump upgrade)18:12How to build a LS 383 from a 5.3 (fuel pump upgrade)
How to build a LS 383 from a 5.3 (fuel pump upgrade)
zhlédnutí 149Před rokem
upgrading to a quantum fuel pump QFS 340LPH INTANK FUEL Music | "Still Love You" by LiQWYD Watch: czcams.com/video/UemtIQh_wS0/video.html License: www.liqwydmusic.com/how-to-use Download/Stream: hypeddit.com/liqwyd/still-love-you
How to build a LS 383 from a 5.3 part 9 (final assembly)7:00How to build a LS 383 from a 5.3 part 9 (final assembly)
How to build a LS 383 from a 5.3 part 9 (final assembly)
zhlédnutí 1,3KPřed rokem
final assembly of the 5.3 stroker
Sanden 508 compressor head repair7:16Sanden 508 compressor head repair
Sanden 508 compressor head repair
zhlédnutí 2,1KPřed rokem
how to repair the head on sanden compressor
How to build a LS 383 from a 5.3 part 8 (installing A/C bracket and alternator bracket)6:27How to build a LS 383 from a 5.3 part 8 (installing A/C bracket and alternator bracket)
How to build a LS 383 from a 5.3 part 8 (installing A/C bracket and alternator bracket)
zhlédnutí 379Před rokem
installing ebay a/c bracket and factory alternator accessory bracket
How to build a LS 383 from a 5.3 part 7 (measuring for pushrod length)17:28How to build a LS 383 from a 5.3 part 7 (measuring for pushrod length)
How to build a LS 383 from a 5.3 part 7 (measuring for pushrod length)
zhlédnutí 899Před rokem
how to correctly measure for pushrod length using a pushrod length checker
How to build a LS 383 from a 5.3 part 6 installing (ARP head studs and Heads)17:16How to build a LS 383 from a 5.3 part 6 installing (ARP head studs and Heads)
How to build a LS 383 from a 5.3 part 6 installing (ARP head studs and Heads)
zhlédnutí 4,2KPřed rokem
installing plug to replace the oil level sensor installed ICT billet oil cooler block off cover installed ARP head studs
How to build a LS 383 from a 5.3 part 5 installing (camshaft, timing set and oil pump)20:54How to build a LS 383 from a 5.3 part 5 installing (camshaft, timing set and oil pump)
How to build a LS 383 from a 5.3 part 5 installing (camshaft, timing set and oil pump)
zhlédnutí 1,3KPřed rokem
How to build a LS 383 from a 5.3 part 5 installing (camshaft, timing set and oil pump)
How to build a LS 383 from a 5.3 part 4 (RODS, PISTONS AND RINGS)19:21How to build a LS 383 from a 5.3 part 4 (RODS, PISTONS AND RINGS)
How to build a LS 383 from a 5.3 part 4 (RODS, PISTONS AND RINGS)
zhlédnutí 963Před rokem
How to build a LS 383 from a 5.3 part 4 (RODS, PISTONS AND RINGS)
How to build a LS 383 stroker from a 5.3 part 3 (clean block and install crank)40:41How to build a LS 383 stroker from a 5.3 part 3 (clean block and install crank)
How to build a LS 383 stroker from a 5.3 part 3 (clean block and install crank)
zhlédnutí 6KPřed 2 lety
How to build a LS 383 stroker from a 5.3 part 3 (clean block and install crank)
how to build a 383 from a LS 5.3 (rotating assembly) part 210:42how to build a 383 from a LS 5.3 (rotating assembly) part 2
how to build a 383 from a LS 5.3 (rotating assembly) part 2
zhlédnutí 6KPřed 2 lety
how to build a 383 from a LS 5.3 (rotating assembly) part 2
How to Build a 383 from a LS 5.3 - Part 1: Disassembly11:30How to Build a 383 from a LS 5.3 - Part 1: Disassembly
How to Build a 383 from a LS 5.3 - Part 1: Disassembly
zhlédnutí 5KPřed 2 lety
How to Build a 383 from a LS 5.3 - Part 1: Disassembly
OBS suburban with custom upholstered leather seats7:23OBS suburban with custom upholstered leather seats
OBS suburban with custom upholstered leather seats
zhlédnutí 444Před 2 lety
OBS suburban with custom upholstered leather seats
LS swapped OBS suburban show truck build (interior part 4)11:32LS swapped OBS suburban show truck build (interior part 4)
LS swapped OBS suburban show truck build (interior part 4)
zhlédnutí 1,1KPřed 2 lety
LS swapped OBS suburban show truck build (interior part 4)
92-99 OBS blower motor replacement/cleaning the evaporator core16:5392-99 OBS blower motor replacement/cleaning the evaporator core
92-99 OBS blower motor replacement/cleaning the evaporator core
zhlédnutí 48KPřed 2 lety
92-99 OBS blower motor replacement/cleaning the evaporator core
custom center console for a OBS SUV15:10custom center console for a OBS SUV
custom center console for a OBS SUV
zhlédnutí 6KPřed 3 lety
custom center console for a OBS SUV
92-99 OBS rear brake and wheel upgrade/update3:2892-99 OBS rear brake and wheel upgrade/update
92-99 OBS rear brake and wheel upgrade/update
zhlédnutí 1,2KPřed 3 lety
92-99 OBS rear brake and wheel upgrade/update
92-99 OBS Chevy rear disk brake conversion21:3392-99 OBS Chevy rear disk brake conversion
92-99 OBS Chevy rear disk brake conversion
zhlédnutí 59KPřed 3 lety
92-99 OBS Chevy rear disk brake conversion
LS swapped OBS suburban show truck build (interior part 3)12:43LS swapped OBS suburban show truck build (interior part 3)
LS swapped OBS suburban show truck build (interior part 3)
zhlédnutí 650Před 3 lety
LS swapped OBS suburban show truck build (interior part 3)
OBS suburban show truck build (interior part 2)5:32OBS suburban show truck build (interior part 2)
OBS suburban show truck build (interior part 2)
zhlédnutí 266Před 3 lety
OBS suburban show truck build (interior part 2)
How to find a coolant leak on a LS 4.8, 5.3, 6.0 (cooling system)13:03How to find a coolant leak on a LS 4.8, 5.3, 6.0 (cooling system)
How to find a coolant leak on a LS 4.8, 5.3, 6.0 (cooling system)
zhlédnutí 91KPřed 3 lety
How to find a coolant leak on a LS 4.8, 5.3, 6.0 (cooling system)
suburban show truck build "building a custom sealed subwoofer box for 4-10" Infinity kappa's14:02suburban show truck build "building a custom sealed subwoofer box for 4-10" Infinity kappa's
suburban show truck build "building a custom sealed subwoofer box for 4-10" Infinity kappa's
zhlédnutí 2,7KPřed 3 lety
suburban show truck build "building a custom sealed subwoofer box for 4-10" Infinity kappa's

Komentáře

  • @Obs_sergeallday
    @Obs_sergeallday Před 11 dny

    Pretty good video; very helpful hopefully I can get the ac blower to come on without jumping it off to come on… Do you have any videos with ground problems ?

    • @Slicpartna
      @Slicpartna Před 11 dny

      @@Obs_sergeallday Unfortunately I dont have any content on ground issues What problem do you have with the blower motor?

    • @Obs_sergeallday
      @Obs_sergeallday Před 11 dny

      @@Slicpartna thanks I can’t get the windshield wiper to come on, radio and the ac is out.. I would have to hit a bump for them to pop on… good Mechanic are in short supply in New Orleans 🤦🏽‍♀️

    • @Slicpartna
      @Slicpartna Před 11 dny

      @@Obs_sergealldayoh wow that isnt good!! You might have checked this already but you can check the ground from the battery to the engine block and to the body Make sure the bolts are tight

    • @Obs_sergeallday
      @Obs_sergeallday Před 11 dny

      @@Slicpartna Will be checking it in the AM. Thanks

  • @tdb0ne1
    @tdb0ne1 Před 21 dnem

    excellent video but have a question. i have a 09 2500hd quad cab 4x4. to my understanding the electrical connector that plugs into my abs module (looks like yours) also sends signals to turn off and on the fuel pump. did you run into this problem when removing the abs module and if so what did you do to fix it? thanks one more thing i dont have a brake power booster i have hydraboost.

    • @Slicpartna
      @Slicpartna Před 21 dnem

      I didn't have any issues with the fuel pump. Everything should should work the same with the hydraboost Let me know if you have any other questions Thanks for watching

  • @MysteryKmt
    @MysteryKmt Před 26 dny

    Just came across a 99 suburban. Figured why not? Your videos are helping me find direction on this build bro thank you 🙏🏽

    • @Slicpartna
      @Slicpartna Před 26 dny

      Let me know if you have any questions Thanks for watching

  • @MikeSanders-oo1oz
    @MikeSanders-oo1oz Před 27 dny

    Thank you very much! I have cleaned mine out with a garden hose before but I am definitely going to use the foam spray asap I need all the air I can get mine not cutting it.

    • @Slicpartna
      @Slicpartna Před 27 dny

      Let me know if you have any questions Thanks for watching

  • @treysberta
    @treysberta Před 27 dny

    Sir... this is by far the best video

    • @Slicpartna
      @Slicpartna Před 27 dny

      Thanks for the compliment Let me know if you have any questions Thanks for watching

  • @187omg
    @187omg Před 28 dny

    An absolute legend. Thank you. 🙏

    • @Slicpartna
      @Slicpartna Před 28 dny

      Let me know if you have any questions Thanks for watching

  • @jamesm568
    @jamesm568 Před měsícem

    If the brakes are hard when the truck is not running and then spongy when the truck is running it's usually the hydraulic valves in the ABS.

  • @Thewordaround.
    @Thewordaround. Před měsícem

    I believe I have that issue too thank you.

    • @Slicpartna
      @Slicpartna Před měsícem

      Let me know if you have any questions Thanks for watching

  • @CCRIDER-wq4hm
    @CCRIDER-wq4hm Před měsícem

    Nice work bro. I had this video on my watch later list. I have my Elco completely primed with high build. I just need to get down on some blocking. Your video got me inspired to start working again. Thank you bro. Stay up✊

    • @Slicpartna
      @Slicpartna Před měsícem

      I suggest breaking the block sanding down into micro tasks, just do a little at a time You will eventually get it completed and ready for the next step Thanks for watching

  • @JamesTheRealSpeaker3.0_
    @JamesTheRealSpeaker3.0_ Před měsícem

    Good job bro. I also prefer wetsanding my guide coat with 400 grit. I find dry sanding too scratchy and I burn through much more easily.

    • @Slicpartna
      @Slicpartna Před měsícem

      going forward i will only wet sand, when i dry sanded the hood, I burned through. i re-sprayed primer on the hood, wet sanded, this time it was a different outcome I'm sold on wet sanding thanks for watching

  • @user-ny2iz9qo5r
    @user-ny2iz9qo5r Před měsícem

    How many remote vehicle buttons can be wired up?

    • @Slicpartna
      @Slicpartna Před měsícem

      You can have as many remote buttons as you want Let me know if you have any other questions Thanks for watching

  • @wyattoneable
    @wyattoneable Před měsícem

    I like wet sanding as well. It makes the sand paper last longer. I have a black GMC Yukon and want to paint it at home. I agree with your idea of painting a section at a time. These are big SUV's and without a paint booth I think it's smart to break it down.

    • @Slicpartna
      @Slicpartna Před měsícem

      I favor wet sanding over dry sanding. I can deal with the water more than the dust. Thanks for watching

  • @rongamble9884
    @rongamble9884 Před měsícem

    Not trying to be rude here but 21 first century man no one wet sands anyone I dry sand every thing

    • @Slicpartna
      @Slicpartna Před měsícem

      Hey doc no offense taken, Like I said dry sanding create too much dust for me. Thanks for watching

  • @SnakeyD8468
    @SnakeyD8468 Před měsícem

    DC's chop shop! 😂😂😂

  • @TheRealEmTown
    @TheRealEmTown Před měsícem

    Where'd you go for your drilled/slotted rotors

    • @Slicpartna
      @Slicpartna Před měsícem

      I got the rotors from summit racing Let me know if you have any other questions Thanks for watching

  • @josecfish5297
    @josecfish5297 Před 2 měsíci

    What about that annoying ABS light how do you get that to come off after the final assembly??

    • @Slicpartna
      @Slicpartna Před 2 měsíci

      I removed the bulb for the abs in the instrument cluster Let me know if you have any other questions

  • @georgiabigfoot
    @georgiabigfoot Před 2 měsíci

    I appreciate you for making this detailed vid. Just got my 96 burb blower motor out and I’m stunned how clogged my cooling fins are. When you are rinsing with water is there any danger of the crud getting stuck in the other side of those aluminum fins ? Or does it drain on the other side too ? Going to depot tomorrow to get the foaming cleaner. Thank you , just subbed Also what brand blower did you buy ?

    • @Slicpartna
      @Slicpartna Před 2 měsíci

      Use a tooth brush to dislodge the crud, remove the debris as best as you can. I ordered the blower motor from rockauto I cant recall the brand. Let me know if you have any other questions Thanks for watching

    • @georgiabigfoot
      @georgiabigfoot Před 2 měsíci

      @@Slicpartna​​⁠many thanks , I found it on rockauto, it’s a four seasons. Appears some Autozone’s carry it too. Blessings

    • @danieldriscol4484
      @danieldriscol4484 Před měsícem

      Howdy there, great video What do u think would be my issue would be if I smell ac refrigeration on inside of my 97 k1500, ac freon doesn't stay in overnite even

    • @Slicpartna
      @Slicpartna Před měsícem

      @@danieldriscol4484 If you smell refrigerant inside the passenger area, then you might have something going on with the evaporator. I would suggest doing a leak search. You can add dye to the system or use refrigerant that has dye in it. To confirm if is the evaporator you will see the dye leak out of the condensate drain tube with the condensation. You will need a light that will pick up the UV Dye Do this at night, you will see the dye better Good luck Thanks for watching

  • @donoberloh
    @donoberloh Před 2 měsíci

    Ive always just Poured ground pepper and it even seals larger cracks

    • @Slicpartna
      @Slicpartna Před 2 měsíci

      Interesting idea, I will have to keep that in mind Thanks for watching

  • @samwellfoden
    @samwellfoden Před 2 měsíci

    Wish I had more friends like you. Can’t wait to see how this turns out

    • @Slicpartna
      @Slicpartna Před 2 měsíci

      I'm anxious to see the this finished I will be starting a new project LS swapping an Ole skool caddy

    • @samwellfoden
      @samwellfoden Před 2 měsíci

      @@Slicpartna can’t wait to see how it goes 👌

  • @jasolhe
    @jasolhe Před 2 měsíci

    Crap i swapped my blower motor one screw suuuucked but i left it out haha. Pissed i missed the opportunity to do this cleaning when it was right There!! Its on my list now the low vents blow hard air but top vents are weak...hasnt been cleaned in 27 years i guarantee

    • @Slicpartna
      @Slicpartna Před 2 měsíci

      Wow 27 years! I'm sure there is all kinds of debris in there blocking the air flow. Let me know if you have any questions Thanks for watching

  • @sst9364
    @sst9364 Před 2 měsíci

    Loved the 383 build that I need to rewatch but now paint nice loving your content. Stay Real!! Thanks again

    • @Slicpartna
      @Slicpartna Před 2 měsíci

      Thanks for the compliment and thanks for watching Let me know if you have any questions about this build

  • @victorthecarguy3126
    @victorthecarguy3126 Před 2 měsíci

    That's one smooth looking Suburban, I've never seen anyone shave the door handles and tail lights. Maybe do the jams ahead of time. Having it all closed when you do the outside should make it easier to get the same finish on the doors and fenders.

    • @Slicpartna
      @Slicpartna Před 2 měsíci

      Thanks for the compliment I plan to paint the door jambs and the roof at that same time. Stay tuned in, Thanks for watching.

  • @r.e.krealestate23
    @r.e.krealestate23 Před 2 měsíci

    Nice bro keep pushing

    • @Slicpartna
      @Slicpartna Před 2 měsíci

      Thanks for the encouragement Thanks for watching

  • @SosaDiesel92
    @SosaDiesel92 Před 2 měsíci

    What is that tapping noise when you have your A/C on ? My truck is making the same noise just trying to figure out what it is .

    • @Slicpartna
      @Slicpartna Před 2 měsíci

      If I remember correctly, I think that sound was coming from the belt tensioner Let me know if you have any other questions

  • @jodywade5617
    @jodywade5617 Před 2 měsíci

    Well done Sir

  • @frederickdean2485
    @frederickdean2485 Před 2 měsíci

    What size crank he’s using???

    • @Slicpartna
      @Slicpartna Před 2 měsíci

      It is 4" stroke crankshaft Let me know if you have any other questions Thanks for watching

  • @treygreen1383
    @treygreen1383 Před 2 měsíci

    Question do you have dual batteries and if so how did you hook them up ?

    • @Slicpartna
      @Slicpartna Před 2 měsíci

      Negative, I dont have dual batteries

    • @treygreen1383
      @treygreen1383 Před 2 měsíci

      Okay thank you so much for replying.

  • @Intensotejanito
    @Intensotejanito Před 2 měsíci

    Thanks for this video sr !!!! This video help me a lot in my truck …gracias amigo 💪🏻💪🏻💪🏻💪🏻🔥🔥🔥👍‼️

    • @Slicpartna
      @Slicpartna Před 2 měsíci

      Let me know if you have any questions Thanks for watching

  • @gbpgbp9992
    @gbpgbp9992 Před 2 měsíci

    Added a dye to my coolant to find my leak but this would be quicker method for-sure

    • @Slicpartna
      @Slicpartna Před 2 měsíci

      yep yep, it doesn't take much time for the leak to reveal itself let me know if you have any future questions thanks for watching

  • @SomeGuyInSandy
    @SomeGuyInSandy Před 3 měsíci

    Nice! I have the same issue. 2004, 5.3, drip drip drip! I've been smelling coolant for a while now. The leak finally got heavy enough for it to drip past the skid plate and onto the driveway. Fun!

    • @Slicpartna
      @Slicpartna Před 3 měsíci

      Let me know if you have any questions Thanks for watching

    • @SomeGuyInSandy
      @SomeGuyInSandy Před 3 měsíci

      @@Slicpartna I ended up replacing the water pump today. Pretty easy really, except for the coolant mess. Whoever it was at GM that made the decision to block off the radiator petcock is a grade-A idiot, lol. I ended up putting two and a half gallons of coolant into it when I was done, and after bringing it up to operating temperature, it doesn't show any signs of leaking! Fingers crossed.

    • @Slicpartna
      @Slicpartna Před 3 měsíci

      @@SomeGuyInSandy hopefully that solved the problem. Let me know if you have any future questions

  • @brianrandle8335
    @brianrandle8335 Před 3 měsíci

    What oil pump did you use ?

    • @Slicpartna
      @Slicpartna Před 3 měsíci

      I used the melling high-volume oil pump Let me know if you have any questions Thanks for watching

  • @user-qe5sd3zf3e
    @user-qe5sd3zf3e Před 3 měsíci

    Hooooooraaleeee.. VATO🤟🫡. I HAVE GT YUKON AND I ALWAYS WANTED TO PUT DISCK BREAK..HORA LE VATO COOL VIDEO 😊

    • @Slicpartna
      @Slicpartna Před 3 měsíci

      thanks for watching let me know if you have any questions

  • @edwardboyer7102
    @edwardboyer7102 Před 3 měsíci

    Bruh hit me back i just need ah truck engine recipe

  • @travisowensby1102
    @travisowensby1102 Před 3 měsíci

    Great video Thanks for sharing

    • @Slicpartna
      @Slicpartna Před 3 měsíci

      Thanks for watching Let me know if you have any questions

  • @Rook814
    @Rook814 Před 3 měsíci

    I have questions my Yukon Denali xl gmc leeking ain't freeze

    • @Slicpartna
      @Slicpartna Před 3 měsíci

      Whatz up doc

    • @Rook814
      @Rook814 Před 3 měsíci

      @@Slicpartna my Yukon Denali XL GMC leaking antifreeze under the car but car not smoking or overheating

    • @Slicpartna
      @Slicpartna Před 3 měsíci

      @@Rook814 I would recommend pressuring the system to Identify where the leak is coming from It could be a hose, the water pump, the radiator etc. Let me know if you have any other questions Let me know

    • @Rook814
      @Rook814 Před 3 měsíci

      @@Slicpartna I will thank you your video help me

    • @Rook814
      @Rook814 Před 3 měsíci

      Another question how would you know if it's the water pump I think it's a bad whose wen you pour it in the line goes down rite away but the antifreeze comes out in seconds but still don't over heat no smoking

  • @Yg55648
    @Yg55648 Před 4 měsíci

    What brand c notch is on your truck?

    • @Slicpartna
      @Slicpartna Před 4 měsíci

      If I remember correctly, the c-notch is from ride tech Let me know if you have any other questions Thanks for watching

  • @scottchissus8364
    @scottchissus8364 Před 4 měsíci

    Exactly what I needed to know. Great visuals. Best video I have seen for this job. Much obliged my friend.

    • @Slicpartna
      @Slicpartna Před 4 měsíci

      Let me know if you have any questions Thanks for watching

  • @nicholas7930
    @nicholas7930 Před 4 měsíci

    Lookin good!! used your video on how to measure for my pushrods. Thank you for your videos!!

    • @Slicpartna
      @Slicpartna Před 4 měsíci

      Yes sir Let me know if you have any questions Thanks for watching

  • @francescocosentini9264
    @francescocosentini9264 Před 4 měsíci

    I'm close to doing this as well .. seen a video to get the ABS thingy to work was by driving the truck fast then slam on the brakes ,to reactivate the abs ,.then bleed the brakes ,.. Thank you for your video God bless

    • @Slicpartna
      @Slicpartna Před 4 měsíci

      Let me know if you have any questions Thanks for watching

    • @francescocosentini9264
      @francescocosentini9264 Před 4 měsíci

      @@Slicpartna I will ,thanks will keep you posted. Blessings

  • @markkiser9329
    @markkiser9329 Před 4 měsíci

    YOU MIGHT HAVE TAKEN AN AFTER CLEANING PICTURE ?

  • @markkiser9329
    @markkiser9329 Před 4 měsíci

    OIL THE BEARINGS. IT WORKS

  • @kendallsprolls6844
    @kendallsprolls6844 Před 4 měsíci

    Hey how's it going? Quick question, what set up did you use for your suspension because I plan on doing the same for my 1995 suburban?

    • @Slicpartna
      @Slicpartna Před 4 měsíci

      I have a 4 way air suspension 4 link in the rear with pan-hard bar Let me know if you have any other questions Thanks for watching

  • @timothyking3201
    @timothyking3201 Před 4 měsíci

    Coming out the weep hole??

    • @Slicpartna
      @Slicpartna Před 4 měsíci

      Na, it was the gasket that failed Let me know if you have any other questions Thanks for watching

  • @larrymelroy5687
    @larrymelroy5687 Před 4 měsíci

    Did the emergency brake line match up What's what they gave you in the kit or was there any mods you had to do?

    • @Slicpartna
      @Slicpartna Před 4 měsíci

      I had to use a longer emergency brake cable, if I remember correctly i use one from 3500 that I picked up from rockauto Let me know if you have any other questions Thanks for watching

  • @Chevro91
    @Chevro91 Před 5 měsíci

    Sik ride 👍🏻 I have a 99 Burn gettin some things done Do you got an IG Page

    • @Slicpartna
      @Slicpartna Před 5 měsíci

      Thanks for the compliment Na no IG page Let me know if you have any questions Thanks for watching

  • @itcomesinwavves
    @itcomesinwavves Před 5 měsíci

    How is it holding up, sir? I'm looking to buy this kit pretty soon here

    • @Slicpartna
      @Slicpartna Před 5 měsíci

      It is holding up fine with no issues, I wish I would have done it sooner! Let me know if you have any questions Thanks for watching

  • @kmnremtp
    @kmnremtp Před 5 měsíci

    It doesn’t cause problems spraying water up in there like that?!

    • @Slicpartna
      @Slicpartna Před 5 měsíci

      Na, Remember the evaporator drips condensation in the air box You dont have to use as much water, the cleaner is a no rinse formula It will wash off as the a/c system is in use. Let me know if you have any other questions Thanks for watching

    • @kmnremtp
      @kmnremtp Před 5 měsíci

      @@Slicpartna thanks for the quick response. I blew mine out with air earlier… I think water would’ve been better. I swear my box was half full of debris!

    • @Slicpartna
      @Slicpartna Před 5 měsíci

      @@kmnremtp yea the air box will collect debris, the cowl cover doesnt do a good job of keeping that jazz out. I have to clean mine out again. Floating leaves, pine needles and such continues to collected in the air box. Thanks for watching Let me know if you have any other questions

  • @jabarimorgan5840
    @jabarimorgan5840 Před 5 měsíci

    Can i get a complete build sheet?

    • @Slicpartna
      @Slicpartna Před 5 měsíci

      LS 383 Parts List Part# MFG Retailer Price AAF-ALL90068 Allstar Performance Oil Galley Plugs Summit Racing $21.99 ARP-134-1101 ARP Chromoly Header Bolt Kits Summit Racing $29.99 ARP-234-5608 ARP Main Stud Kits Summit Racing $229.99 FEL-MS92467 Fel-Pro Exhaust Manifold Gaskets Summit Racing $10.99 MEL-M29517 Melling Oil Strainer Gaskets and Seals Summit Racing $2.99 NAL-12499225 Chevrolet Performance Hydraulic Roller Lifters $376.27 561121916 PAC Racing 1200 Series Valve Springs Speedway motors $175.27 SUM-150106 - Summit Racing™ Camshaft Retainer Plates $14.99 SUM-350119BLK - Summit Racing™ Spark Plug Boot Protectors $49.99 TFS-30675600 - Trick Flow Timing Chain Brackets for GM LS $39.99 CLO-9-5417 - Cloyes Timing Dampers $15.99 CCA-1677-16 - COMP Cams Ultra Pro Magnum Rocker Arms $453.95 45013WT Water pump 2010 Chevrolet Camaro 6.2 RockAuto $144.99 12595365 GM GENUINE Valve Lifter Guide RockAuto $6.38 ea 12589226 GM Genuine head gaskets RockAuto $26.99ea MEL-MPE-900BR-GP EXPANSION PLUG KIT Summit Racing $22.34 ICT Billet 551621 ICT Billet Oil Cooler Port Delete Plates Summit Racing $17.99 MS92438 FEL-PRO INTAKE MANIFOLD GASKET RockAuto $19.60 VS50504R1 FEL-PRO VALVE COVER GASKET RockAuto $18.35 070-234-4317 ARP Head Studs HEAD STUDS Jegs $295.99 K1 LS1 383 STROKER BALANCED ROTATING ASSEMBLY 10.2:1 WISECO PISTONS $2,786.95 CNC motosports Be sure to read through everything carefully some items you might not need for your build let me know if you have any questions thanks for watching

  • @bandoblac_34
    @bandoblac_34 Před 5 měsíci

    I have a 94 suburban I want to put a ls3 in it will it fit and what would I need to make it work

    • @Slicpartna
      @Slicpartna Před 5 měsíci

      Oh yea it will fit with no issues You will need motors mounts, Wiring harness unless you get the wiring harness with engine and a tune to remove vats (vehicle anti-theft system) The swap is simple. Only cut what you know you will not use or need out of the factory harness. Label before cutting anything! Let me know if you have any other questions Thanks for watching

  • @kurrentevent
    @kurrentevent Před 5 měsíci

    I would like to kno what pistons, Rods, and crank you use.

    • @Slicpartna
      @Slicpartna Před 5 měsíci

      K1 4340 forged steel crankshaft 4.000 stroke K1 forged 4340 steel H-Beam rods with 7/16" ARP 2000 rod bolts, 6.125 length Wiseco 2618 forged pistons, ArmorGlide Skirt Coating, .150 wall wrist pins I got the kit from cncmotorsports.com Let me know if you have any other questions Thanks for watching