Video

Thanks for sharing the knowledge! Also great comedy at the beginning there. Despite this video being very informative, I think it is best if I send mine in for yall to do the work.

I care about that hair! Brother, do we need an intervention?

I installed this exact mag release…did not like it so I put the original back on. I went to a conceal carry class and we did drills all day. My fingers kept hitting the release and the mag would begin to slip out…many, many times. To clarify, I’ve been shooting handguns for over 40 years so I kinda’ know how to shoot. The original release is too close to the frame so the mag will not freely release (like a Glock). Unfortunately, this mag release is too big, at least for me. Good luck to all!

A few weeks ago I bought a Ruger American Gen 2 in 223 and on impulse I saw a matching 22 long rifle so I bought them both. Thought they would make a nice pair. Anyway, I bought a couple of the trigger spring kits and OMG... Simple and easy install and amazing difference. Almost feels like a different trigger to be honest. I put the factory reset screw in about halfway with a little bit of removable loctite and I'm getting right at 2 lb with a better feel overall. Made a huge difference in my target shooting. Thanks Mcarbo!

Do you sell just the trigger return spring on your website?

Just finished this, the video is all you need. I ended up learning so much more about my gun and how everything came together. Trigger felt like a dream, even my wife feels more comfortable with the SA trigger. A+ product and instructions!!

I’m a cnc machinist that also runs a 5th axis and once I came across this trigger I was SOLD! Better than anything else I’ve found and WAYYYY better than the stupid injection molded trigger.

Hey. I was having the same problem...5 shots...3 touching, and 2 fliers on most brands of .22LR ammo...then I tried some 38 grain Aquelia hollow points in the red box from academy...I got 5 touching consistent from 4 different . 22 rifles...just my experience...check out your rifles with this ammo...their 40 grainers were no good also...but the 38 grain were consistent for me.

Then, why make a Titanium Striker and put it in a Steel Channel in the first place? The channel is steel. The striker spring and striker housing is steel. All of it is wrapped around a Titanium Striker. So, the cups being Titanium also would not make a difference as far as galvanic corrosion. Titanium and Steel have been used together in many applications for a very long time. Galvanic corrosion would be caused by a softer metal with metallurgical properties farther away from each other, such as copper and certain high carbon steels.

What recoil???

I WOULD LIKE TO SEE THIS DONE ON A MAVERICK 88 WITH THE CROSS BOLT SAFETY. THANKS FOR THE VIDEO

🫵🏾😎

tip, the presenter tells you to put your finger over the trigger spring AFTER he pushed out the trigger pin. You need to do it BEFORE, or you will lose that spring...ask me how I know...oops on my part!

That was a great video you guys really know what you're doing I purchased from you before I can't wait to buy some more stuff from you guys

Sweet and to the point unlike Lenny Mcgill. Saved me a lot of money AND time. My local gunsmith was 5 weeks out.

Genial

Can you guys make this trigger again please 🙏

Dude's never heard of lotion or coconut oil

When you going to make video's on the new gen 3? Sure would like to see them,, just got the new gen 3 haven't been to the range but plan to today. By the way I love the adjustable trigger for my m18, that thing is awesome!!

Polishing does remove metal, how else would the surface become smooth. Material is removed, as seen by the blackening on your tool....... Material has to be removed,else it wouldnt become smooth, the paste you used is an abrasive, which removes material. Very light material removal yes, but ya cany say polishing doesnt remove material.... thats a bit silly tbh.

I put the trigger in x macro and I noticed there’s a delay after pull the trigger, it’s like half a second. Does anyone know why this would happen? The only thing I changed was the trigger.

Ok ok....the mods are very necessary

Does anyone know if the kydex cheek pad fit on the KSG-NR?

Just finished the kit and followed the detailed video. My P-07 went from 5 3/4 lbs to 3. Lbs in single action.. and from 12.5 to 7 3/4 lbs dbl action… best 30 bucks Iv ever spent on a trigger job! Smooth Crisp pull .. thank you ..

I'm surprised I'm the only one commenting asking 'why' on the the big goofy lever.

How the hell do i take the commie fin grip off

I have a question about pin down I just I perched the pin heavy duty from Mcarbo so whene I go to the range I noticed the pin star come out do you have any idea because I just contact them they said send me the pin back but I ask you that question do you notice that the pin from Mcarbo has the same issue with the pin like from ruger factory why the pin come out when the star shooting

These guy have the worst customer service. I have sent 3 emails, and not one response. I purchased the takedown pin for my LCP & LCP Max. The pic still walks out after one magazine. These scammers have not answered one email. Avoid them. I have seen other posts addressing the same problem, but no response otherthan the compter generated one that says they will get back to you. At the range my wife was fireing her LCP 2 and she looks at me and says the pin is coming out. I told her to put the gun down after she cleared it until I could look at it. The pin had walked halfway out. These guys have no idea what they are doing.

I got the new buffer pad and the when trying to put it back in the gun the buffer clip came off

I'd pay the 12 dollars for the spring. I would not pay 1.20 for whatever camera this was shot with. Good god, focus!!!

Will this extended mag release button work on a Wilson Combat grip module?

Do you have an updated link for the video with the manual safety? The previous link is not working.

My P938 started out at 7.5 lbs. I installed the new firing pin spring and the hammer spring. After putting about 75 rounds through the gun I'm at a consistent 5.5 lbs. I expect that after another 100 rounds or so I'll end up at 4.5-5.0 pounds. This is OK for me. But I won't see 3 pounds.

Thank you for the detailed video. This is the only one that shows how the Hammer strut bridge alignment works. Thank you for that alone, but the sequence of reassembly really helped me too.

CAN YOU SHIP TO CANADA?

Do you guys still sell the trigger?

Just did this trigger job right now and now I cannot pull the trigger. what do I do to fix this I cannot take the pistol apart anymore

Have you guys thought about making some 15 rd mags for the p01. Cant find them these days

Can’t find this on your website please tell me you still make it

Why is this no longer available????? Is the another option(s)?

I found this video very helpful for a silly reason. I recently tried cleaning my JXP10 for the first time and after I successfully got the slide off I made the mistake of holding the frame upside down, causing the sear assembly, sear spring, sear cam, and sear block to fall out. I couldn't find any directions in the manual on how to reassemble it, besides a vague warning not to hold the frame upside down with the slide off for this exact reason. Google and every cleaning and disassembly video I found also proved useless until I found this video. By watching the high-quality close-ups of the sear components, I was able to figure out how to put it all back together myself so thanks for that.

I JUST INSTALLED ALL THE EXTERNAL UPGRADES ON THE NEW GEN 3 , I MADE A JIG FOR INSTALLING THE NEW TOOL LESS LOCKING CHARGING HANDLE AND IT MADE THE INSTALL QUICK AND EASY! ( HERE IS HOW TO DO IT -- TAKE A 2X4 ABOUT 1 FOOT LONG , DRILLL A 3/8TH INCH HOLE CENTERED IN THE 2X4 ,S FLAT FACE, THE 3.5'" side,, MAKE SURE THE RECOIL SPRING SLIDES IN EASILY BUT DO NOT EXCESSIVELY OVERBORE THE HOLE. ! NOW YOU NEED TO EITHER SCREW THE 2X4 TO YOUR WORK BENCH , OR MAKE A LARGER BASEPLATE AND ATTACHE TO THE 2X4 TO MAKE IT STABLE TO WORK WITH, DO NOT DRILL THE HOLE THRU THE BASE, AS WE ARE CAPTURING THE SPRING IN THE CENTER HOLE.. THIS NOW ALLOWS YOU TO HAVE A SOLID PLATFORM TO COMPRESS THE SPRING WITHOUT STRUGGLING WITH KEEPING THE ROD FROM SLIPPING AND SLIDING WHILE YOU ARE COMPRESSING THE SPRING. YOU CAN NOW EASILY COMPRESS THE LOWER SPRING , TO AS GREAT A DEPTH AS YOU NEED TO ATTAIN THE NEW LOCKING PIN ON THE SPRING, IN ONE SIMPLE COMPRESSION OF THE SPRING

I watched 15 minutes of this video and thought: What an awesome thing that creative people can solve market product issues. But, then I thought: Why would I buy a piece of crap gun that requires extra purchase of kits and tools, in order for it to function properly.

I just got one but haven't used it yet. I need a few tricks on it. Good gun, good price.

Any updates for the Gen 2?

I find it very odd referring to one single little spring as a "kit". My guess is it's your way of trying to justify $20 CAD for a spring that cost less than a dollar. I think I'll just order a bulk pack for the same price and hand them out to shooting buddies and people at the range.

I made it easy my dude

Thanks so much for this video! Just installed my springs on an A3, which has simplified internals, but I couldn't have done it without ya.

Why does KelTec need an after market company to do what they could or should do?

So much greatness detail of steps was very informative and helped me lots