Extra Power Recoil Spring Upgrade for Ruger LCP, LCP II & LCP MAX!
Vložit
- čas přidán 9. 08. 2023
- Ruger LCP & LCP II - www.mcarbo.com/Ruger-LCP-LCPI...
Ruger LCP MAX - www.mcarbo.com/Ruger-LCP-MAX-...
Discover the optimal upgrade to your Ruger LCP, Ruger LCP II or Ruger LCP MAX with the Extra Power Recoil Spring by M*CARBO. This performance recoil spring offers a 15% strength increase over the factory recoil spring, ensuring your LCP cycles more efficiently and improves feeding reliability.
Our Extra Power Recoil Spring allows for tighter shot groupings, dramatically improving your accuracy and consistency in every shooting scenario. It's the ultimate enhancement for professional shooters and hobbyists alike who demand precision and reliability from their Ruger LCP.
#rugerlcp #rugerlcpii #rugerlcpmax - Sport
It's MCARBO. They make guns better
Thanks guys! Just ordered the pin spring and steel rod!!!
From Mcarbo when I asked how many pounds this new spring was. Their reply:
Good morning
I have spoken with our engineers, It is sitting at 12lbs. From the OEM ones we have seen in house, they are sitting roughly 10lbs. Since springs have a tolerance, im sure some people are getting them just below or just above that.
Kenneth Noble
M*CARBO
Thank you mcarbo for the awesome video.
Will be getting a hold of you to purchase that kit. Looks fantastic
Purchased! Thanks 👍
Only upgrade that's missing now is spare firing pins for Ruger products.
Hmmm...looks like I'll be ordering me one of those for my LCP II
Great video
Do you guys have any Keltec P3AT trigger upgrades sitting around by chance?
LCP1 380 FTF common? So many claim 0 malf's yet my 1st 50 rds almost all FTF. Better after polished F Ramp. Extractor is stiff. FTRB rarely. Worried about FTE with new spring.
So the install is on the max but on the lcp 2 .22 is the recoil spring similar with an internal spring?
@@Vlad_MCarbo 🙏 LCP1 380 FTF common? So many claim 0 malf's yet my 1st 50 rds almost all FTF. Better after polished F Ramp. Extractor is stiff. FTRB rarely. Worried about FTE with new spring.
Nothing new for the lc9/lc380?
I tried the 12 lb spring on my lpc max and was getting a few light primer strikes per mag so I had to remove the kit unfortunately
Galloway has a 13lb spring.
The 13lb. spring is only for the .380 variants, though.
So +P should be alright???
Yes!
The owners manual says do not use +p. Barrel is too thin for higher pressures
I wouldn't feed it a regular diet of +P but for concealed carry it's fine, I ran 5 boxes of Underwood Xtreme Defender +P through my LCP2 to check for reliability first & it ran flawless.
I have thousands of rounds through my lcp2. No issues so far. Don't start replacing parts if you don't have a problem. If you do have a problem it could be a limp wrist
It’s the 13 pounds??