Video

When you first posted the problem my thought was "did you measure the diagonals?" A custom made product should definitely be square.

A great video, nicely done❤

This is super helpful, thank you so much

6:40 I faled to see how could an average youtube viewer could make any use of this comparison that is coming next between the different type of waters.

Phisics

I really sorry but You didn't understand how MEG actually works. You should understand the basics of Philips evolved on this device to realise how it works.

Kitty! 3:50

To all the people saying you need to check them before you leave the store, when you special order them (that means a custom size that is not off the shelf) they come shrink wrapped and encased in foam for protection from the factory and you usually either pick them up from customer service or contractor services or have them delivered to your location. Unwrapping them in the store and transporting them would just be plain stupid as now they wont be protected when transporting them. With that being said, since covid QC at of all big box windows has gone out the door Jeld Wynn and therma tru as well sux. I had it happen to me several times and I finally quite buying windows and doors from the big box stores and now order MI windows from my local lumber yard. I have had much better success and if there is an issue my outside sales rep deals with it rather than me spending countless hours dealing with customer service. I will never buy windows and doors at the big boxes again. (And as a bonus, they are usually cheaper)

Nice work but a bridged connection works well also

THEY PROBABLY HIRED DEMONCRAT COLLEGE GRADUATES.

HD, at times, will buy seconds / blemishes, and play the odds. I've had problems with a tub, and enclosure. Then, I had 12 new thermal pane windows that I bought from them and had one of their contractors install them. The installation was done May-06, and Nov-06 a few fogged up / sweat within, (a leak between the glass) I went to the HD and gave them the numbers needed to replace them, and 9 days later I received 1 of 3, and told they were being made. Feb-07 still no windows and another 4 went bad. Instead of dealing with HD, I called the manufacturer in Ga and was told they filed Chapter 11 and were out of business. Sept- 07, HD did replace the others. I was told a new company opened, and they thanked me for dealing with them. lol, right. Well, I found the company that filed C-11, opened under a new name, same owners, new name. (there is another long story about the widows and the new company, but I'll save you the time) To make it short, HD is not using those companies anymore, All my windows were repaired locally, and paid for by me.

Found what I was looking for. You The man!

No one ever mentions that the output terminals have a current limitation of a few amps. However, if you need to control a bigger load you can use a relay on those terminals to control a bigger load. The size of the light is very small and with this model of controller the output changes based on the voltage of the battery. So it isn't reliable lighting. Not sure what purpose other than what's happening with the charge controller the output is good for.

Nice scooter.. better be good for the price lol FYI your eagle one link is the same link as the "other varla scooters"

Absolutely nothing in my house is square. These windows would be a perfect fit!

You need to check the windows out your self before you take them home.

just returned mine too many glitches and problems, bought a ac300 bluetti for $200 more

Some will think that you are over-reacting, but this is unacceptable. These are produced on frames where it's almost impossible to screw them up, so it shows that some workers simply did not care; they let the window go to shipping likely *knowing* that it wasn't right. I will not buy from this company.

ALWAYS measure your windows for squareness BEFORE you pay. I bought windows in March and waited until the warmth of June to install. One out of six wasn't correct, but it wasn't worth the effort to remove it and drive it back for replacement.

That sucks. Too many people either don't know enough or don't care to do a good job.

It's a different kind of video but also appreciated. I sort of laughed at a guy at HD the last time I was there, he was measuring plywood thickness. I feel silly now. 🤣 I guess I will be bringing my measuring tape with me. 📏

That sucks. 👋 patches 🐈

Patches does not approve of their QC!!

spend decent money on Pelle, Marvin, Anderson even mid tier is junk

As a former Home Depot associate in my apron (others will get that reference) I am surprised at this. I always went out of my way for customers and trained people to do the same.

Have you ever tried just using the slip fitting without cutting out the section? I'm wondering if the slip fitting provides enough overlap to seal a small crack.

I recommend measuring the new window at Home Depot.

Plygem customer service: "Sir, we are required to now employ undocumented immigrants. We all must now lower our expectations."

buy american does not always pay off as usual. And I guess the service will be even worse.

When i bought universal size windows from HD, it took 4 tries before we got a good one.

Thank you so much for the video 🙏🏻 it’s good to know!

Cat says "This sucks!"

Bought a GBA on eBay that had a perfect screen but unmentioned battery corrosion in the holding chamber. Used this video and it worked like a charm. Held it upside down while applying liquids to avoid leakage into the system. Thank you.

Timestamp 11:08 you can still see a hole man you missed it and that is gonna make you good work go bad quickly as water will leak through😅

Hello i have an 8000BTu window ac unit Its general electric when i got home it was 102 degrees in the baack porch with my cats..i'm glad they r ok..the fan is working fine and the filters and coil are all clean..OUTSIDE its blowing cold air OUT and drawing HOT air into room>>ANY ADVICE MUCH APPRECIATED..i shut it off and reset the circuit breaker on cord and it blew cold but the died again an hour os so later **PLEASE ADVIE i dont have dials i have up and down digital settings led

Brother broke every law of physics 💀

Why nkt test for bacteria?

aims inverter test?

NICE VIDEO.

A Florida house, circa 1958. The window was a dead giveaway.

👍 Great explaining. Thank you

Even though the device would be unlikely to work you put a commendable amount of effort into setting up the almost frictionless base plate then then created a stiff upper axle holding the other magnets and spun the table as slowly as possible seemingly to guarantee failure! It would be nice to see the setup working at a faster speed and with a similarly frictionless axle.

My question; I'm working on one of these greenworks 2000 psi for my boss. I fixed the issue with the pressure (bad o-rings) but it still seems to be dripping from the bottom of the pump, it did this before and after replacing the o-rings. It only leaks when pulling the trigger on the wand, but I cannot find any rhyme or reason for it to leak. It doesn't leak "a lot" maybe a quarter cup's worth of water over an hour. I made sure the surfaces of the pump parts were clean and smooth, everything fit snuggly and tighted the bolts correctly. As indicated above, it leaked like this before I repaired it, and doing the very same thing after i repaired it. Is this normal for this brand? Perhaps some kind of pressure regulation (ie builds too much pressure so it leaks a little out to maintain it?) Thanks for any information you can bring to light!

Good evening sir if you apply past you don't need lead please tell me its name hugs from me

Thank you sir. Very valuable and detailed

Hey, so does this mean, if i disconnect oxgen sensor from car and test it with multimeter, even if it shows a response, the oxgen sensor could still be faulty because its not getting tested and required heat temperature ?? Im getting a p0420 code , after fitting brand new approved cat after couple weeks, scratching my head, as checked the 02 sensors disconnected and they show a response, they aint at zero. When i clear the code, it comes back on after along drive. Thanks

Fantastic test. Thank you.

turn off your breaker to your home, wait 1 hour than sweep

FPE panel? It sure looks like a zinsco to me!

Huh! Nem is tudtam, hogy ennyire veszélyes ez a készülék. Már a kondenzátor is veszélyes, de ez a transzformátor különösen. Nagyon köszönöm ezt a bemutatót. Tanulságos.