Video

My main hard drive was getting full (Again!!) so I picked up a Western Digital 4TB Hard Drive $49.99 at Micro Cener for my Docking bay so I could transfer stuff off onto it. I couldn't remember how to set the new drive up and your video walked me right thru it. Saved me lots of grief. You earned yourself a subscriber. Thanks!

I tried both sata ssd (m+b key) and nvme on that m.2 slot but nothing works. What were you using?

thank you

That m.2 slot got me so confused. Mine is the same laptop except when I flipped it, it doesn't have a pre-installed ssd on that m.2. What makes it worse is it has a label on the board that say "msata 1". So does an m.2 nvme will actually work or is there a different kind that I should buy?

omg so slow just RMB Open with - > navigate and pick Dosbox app the is all!

you are the worst lol

I can't plug my power connector to my hard drive on my new Power supply

Hello I only get my ram rgb on But nothing else Even the psu fans Is it a mobo problem or psu

Mac OS X If you are using Mac OS X, a preferences file will be created for you on the first time you run DOSBox (as of version 0.73). This file contains the same system settings and initialization values as the dosbox.conf file on other systems. It can be found (and modified) at ~/Library/Preferences/DOSBox 0.73 Preferences, where ~/ is your user profile folder (usually /Macintosh HD/Users/username/). The exact folder name in the Finder may vary, depending on the language you use for OS X.

I have the 8 pin connector plugged in but theres an additional 4 pin slot next to it, I get motherboard lights but no fan spin or anything, ive tried the power switch and bridging the power switch pins do you think think those additional 4 pins should be plugged in?

Thanks. Very helpfull, now i can play Blockout again, after 30 years... :)

Outstanding! Thanks for your help on this. I just got a mac mini.

Thanks a lot for making this video! It really helps you to start going with DosBox on a Mac! I have been using DosBox on a PC for a while, but there are always these little differences that can be so pesky))) Have a very nice day out there))

Is it possible to create exe file from C++ code ONLINE?

I have trouble finding the correct service manual, there is another x360 14m with a different layout

I bought this my mistake and is there an easy way to just show current watts continuously. I didn't realize this monitoring type was available and bought the wrong one.

Hello ! how can I do a tilde on MacBook in this software ? I can't found it

Please mention the caution on your video on a 99% possibility of losing your network card - Was a good Video but lost my Network I used a TP link wireless adaptor - after installing the drivers offline it worked like a charm tho

Is it possible for me to upgrade with an ssd 2.5? Seeing the slot with the black squareish thing would fit perfectly.

What surprised me is someone actually still filming vertically.

Seven commercials later ….

Hi i have hp pavilion x360 ba073tx model. I want upgrade to SSD. if i upgrade to ssd , then do i have to use hard drive externally ?

That's an incredible tutorial. Very easy to follow up. One question. How can I add a sata ssd if there's those little black block ( you show it at 10:00) in the place where it is supposed to go? It goes above it ? I was afraid of force it out. And can I connect it with any flat cable or just for hp pavilion x360 ? do you recommend any please ?

12:27 UHD* not UDH

Totally a novice here... did your Orion game come from a CD-Rom or was it a download from elsewhere? I have a CD-Rom game I'm trying to use DosBox to play, but am unsure if its possible to get it into the stages and location you have your Orion game?

After you first run DOSBox, go to the ~/Library/Preferences/ folder and open the newly created file DOSBox 0.74 Preferences. The exact folder name in the Finder may vary, depending on the language you use for OS X. By editing this file, you can set the system settings and initialization values that define your emulated environment. You can also add MOUNT commands to the AUTOEXEC section at the bottom of the configuration files, so that you do not have to type them in every time you start DOSBox.

i need help how do you type ~ on a german keyboard i had to switch to an english keyboard to type it but doing option n doesnt work on dosbox

The kids bought one for ther mam's birthday. The birthday is 09/11, so she did not recieved the present yet. But i am glad to see that your score is so high for a cheap dashcam.

Thank you for this very helpful video. It enabled me to feel confident enough to upgrade the ram on my 15" HP Pavilion laptop. It also showed where the problem was when my WiFi no longer worked after reassembly (The Wifi card had come adrift from the MB), so all in all an excellent video.

At 9:58 in the video, you can see that there is a SATA slot that is currently unused in this model, which is the same model I own. I'm curious if it's possible to install a 2.5" SSD in the empty disk bay and connect it to the unused SATA slot using the purple SATA cable that you began to disconnect at 10:46. Interestingly, this purple SATA cable appears to have the same serial number as the one mentioned in the manual for adding a second disk. The only issue I've encountered is that the cable that came with the laptop lacks the SATA connector required to connect it to the SSD, as it only has the part that connects it to the motherboard. I know that there are easier ways to do this, but I already have an SSD and I wanted to upgrade my 14m-b and I can't afford a new M.2. or an official sata cable for this specific laptop model thanks for your time! amazing video

I do wish the modular power supply makers would stop putting three SATA plugs on each cable - it makes it hard to connect up. I'd like to see three cables supplied with only one SATA plug on ecah one. Short, Medium and Long in length. That way we could keep our computers nice and tidy.

How can anyone put these cables in the wrong way?

Thank you for uploading this video, This helped me a lot when I upgraded my RAM, just want to add, when removing the main board make sure that there is no micro sd inserted in its slot.

Hello, both memories can be changed?

hola pregunta ambas memorias se pueden cambiar?

I didn't know HP had such well documented service manuals!!!

How to make it the boot drive?

Excellent video. It covers everything step by step, clearly. I followed the instructions and it worked great.

Very good demo, love all the little details explained...Thanks.

thanks for showing this video most people who are not computer based like myself need to do research before attempting computer stuff . my 2 questions are if you have 3 hardrives connected how do you know which order they are plugged in the sata ports from computer screen? and which drive boots up the computer at start up? cheers

I have the same laptop. Is this ssd working with Nvme ssd drives? Or just m.2 only?

Thank you!

I like your teaching video clips very much. The speed of the explanation is suitable for my non-native English speaker. The technical explanation is very detailed and the examples are also meaningful. This is one of the best introductory C++ instructional videos I've seen. Looking forward to your next one.

This is a very good tutorial, recommender 🎉

I didn't read all of the comments left but I a have a question. Does anybody know if HP's batteries can be (upgraded) from the factory size to a larger capacity?

Thank you!!!😊

awesome video. i have a new dash cam . but mine turns off after a few min. and the screen turns black. is there a easy fix so my cam stays on. please and thank you

Thank you for this comprehensive walkthrough video. I just added an extra 8 GB of RAM and your video was so detailed that it allowed me to look out for some easy overlooks. I inadvertently disconnected my network card from the motherboard and it was a pain to reconnect the antenna connections but I got it done. Also, the connection to the display monitor was kind of tricky in order for the screen to function. Lastly, those three ribbon connections for the keyboard doesn't allow for much space to work with so patience is key. I know I'll be opening up the computer again to upgrade to an SSD drive (currently it has an SAS) but in my case, it will not call for me to remove the motherboard so it won't be as involved next time around. Thanks again!

So if I buy one that says its compatible with my LGA 1151 it will still work, even though it doesn't have those white click things? Will it just screw into the holes on the mobo?

can cpuz be trusted to spot a fake gpu ?.i have a 1650 and it says the ram on the gpu says ddr6 well ddr6 wasnt available till 2020 my card release date was 2019