Beautiful! 1st one I've seen that I like as much as mine. Only difference is mine is flat black and the airfilter. Even have the same handle bars. Beautiful bike man.
I will do a follow up video as soon as I put the new sidebag on. Thanks for the compliments. No, you only have to rejet it when you put new pipes and upgrade the air intake. One of these days ill get around to it. I have a couple other videos with modifying bikes, check em out...
I used some stuff around the house lol. But I ended up using garage door rubber seal for the bottom of garage's. So i cut off a couple pieces, folded them in half, and wedged them in there. When I mounted the custom blinkers, the bolts secured them in place. Then I just sprayed them real quick with universal black to clean and match everything up.
Did you have to get longer cables to run those bars? Got a link to them. I’m looking for a set for my other shadow but would like to use stock cable length.
I have the same exact bike just black. Bobbed out. New to the bike scene. It's my 1st bike. Was wondering why would I have oil on my fuel filter housing and a hose under carb but no where else is there oil.
You either have a hairline crack in one of your heads, or the person you bought it from spilt oil on it or something. Clean it real good to see if it persists or to see where its coming from exactly. So clean, ride, observe right after you get off bike...
Yes they are also Ebay Bars. I did not need to switch out the cables and wires, because they are only 8in. Tall. They are very well made, very durable, solid bars. If they were cheap I wouldn't recommend them because I wouldn't want anyone getting hurt. Everyone who has seen them in person was really drawn to those bars. I think they were $50-60 bucks then i had to drill a couple holes so that I could mount the hand controls properly. Thanks for the compliment
Thanks. Its not done yet. Eventually I will chop them off. I left them on to see if I change my mind and add a rear fender for a passenger seat. Not sure yet...
EBay, But ai took it off. Ordered a better one from La Rosa side bags. They custom stuch them to order. Cost a bit more but its worth it the other one already started to fall apart.
Lol thank you. Check out the update videos, new chain,guard off, new seat, new bag, I did get a jet kit and air intake. Just haven't installed it yet. Part 3 is the chain and seat swap
Seat- Ebay just search universal bobber seat. Make sure to make sure it will fit your bike. It usually gives you that check to make sure it fits option. You may need to Modify your seat pan a little. Or it may just slap right on. The springs are a Bitch to put on. I used a telescopic magnet to get the first few turns. Then the rest was easy. I had to figure it out the hard way, but I figured it out...
I'm sorry for such a late response. You probably already got tires already. But the name of the tired are SHINKO. They have.been around for a long time. They are nice and sticky tires. They ride smooth as well...
Dig it!!! Currently in the process of bobbing an 88 VLX.
Thank you! That's sick. I hope you get down on it.
Bad ass bike, about to get a 97 vlx600 and bob it out, the black pipes are sick looking
Pipes and whitewall tires looking badass👍
Thanks, i put a different bag and wrapped the exhaust recently
Just beautiful work. 😎😎
Thank you!
Albert King and SRV Class Act. Kudos on a job well done. \m/
Thank you, it still has a few touches Id like to do...
That's a clean bike. Nice job.
Thank you, its not finnished yet but will be doing a part 3 video soon.
Savage bike. Looks cool. 👌💪
Thanks much! I'll be doing an updated video soon...
great bike build and your gym isn't bad either :)
Thank you!!
looks amazing!!! ❤
I just saw your message, Thank You!! When you get your M1 license you can ride it!
Badass man great job
Thank you!!
Beautiful! 1st one I've seen that I like as much as mine. Only difference is mine is flat black and the airfilter. Even have the same handle bars. Beautiful bike man.
Thats awesome! Thank you very much!
Your welcome!
I didn't skip to the end, specifically because of the song choice.
RIP SRV
Thank you lol!!
I want to put a heritage softail on the rear of mines.Chulo it out. I did this build 5 years ago .
That would be sick!
Love the bike it looks amazing please post more of it and did you need to rejet the carb for the new exhaust?
I will do a follow up video as soon as I put the new sidebag on. Thanks for the compliments. No, you only have to rejet it when you put new pipes and upgrade the air intake. One of these days ill get around to it. I have a couple other videos with modifying bikes, check em out...
You are the best❤
Thank you🥊🥊
Hell yeah badass build man! 🤘 can you show how you secured the seat pan to the frame?
Thank you! I drilled some holes and popped some screws in there
Lol. Some people weld it on...
New updated Video is up on the Shadow Bobber
Nice
Thank you
Great tunes🎶 Sexy ass bike, ok Vato, all you need is the ☀️ on your shoulders n the 🌬 on your back 👍🍻
Hahaaa, yes sir..... Thank you!
Great. I'm on the solo seat mount step. That your modify was doing good? Seat was still in place? I'm thinking to do it your way
It's really not that hard...
where you get the Z bars from?! i like it!
I love the build! What kind/ name of handle bar is that? Would love to purchase one in the future.
Thank you! Z Bars
What a beauty!!! What did you use to plug the post cut opening of the rear fender frame @ 1:09?
I used some stuff around the house lol. But I ended up using garage door rubber seal for the bottom of garage's. So i cut off a couple pieces, folded them in half, and wedged them in there. When I mounted the custom blinkers, the bolts secured them in place. Then I just sprayed them real quick with universal black to clean and match everything up.
@@coachrubenluna2729 haha, resourceful solution! I dig it!
Small changes , big difference.
Thank you!
Did you have to get longer cables to run those bars? Got a link to them. I’m looking for a set for my other shadow but would like to use stock cable length.
No I used the original cables with the new bars
Sweet build. I have an 07 vlx600
Where did you get your seat kit? I’m trying to modify mine
Ebay, just type up your year and make. You'll have some cool options. You might have to modify your pan a little bit, maybe...
Stock exhaust sound, proceeds to blast music over it. Lol. That made me laugh
Stock exhaust sound sucks... lol thats my opinion anyway
I have the same exact bike just black. Bobbed out. New to the bike scene. It's my 1st bike. Was wondering why would I have oil on my fuel filter housing and a hose under carb but no where else is there oil.
As far as that issue I have no idea. I have the same bike but I never had that issue before
You either have a hairline crack in one of your heads, or the person you bought it from spilt oil on it or something. Clean it real good to see if it persists or to see where its coming from exactly. So clean, ride, observe right after you get off bike...
Are those white walls with tubes inside or did you seal up the spoke holes in the wheels for tubless tires?
White walls with the thick tubes...
What LED relays did you purchase for those turn signals
It was on ebay for like 7 or 10 bucks. Its just called a led blinker relay for this year and model of bike...
I start one project too ❤️👏🏻
Postva video, I'd lovevto check it out...
Are those the eBay handle bars?? What do you think of them thinking of putting some on my 07 buy I haven't seen any vids on them. Buy sick bike man!
Yes they are also Ebay Bars. I did not need to switch out the cables and wires, because they are only 8in. Tall. They are very well made, very durable, solid bars. If they were cheap I wouldn't recommend them because I wouldn't want anyone getting hurt. Everyone who has seen them in person was really drawn to those bars. I think they were $50-60 bucks then i had to drill a couple holes so that I could mount the hand controls properly. Thanks for the compliment
I like it it came out bad ass .But what's up with the passenger foot peggs
Thanks. Its not done yet. Eventually I will chop them off. I left them on to see if I change my mind and add a rear fender for a passenger seat. Not sure yet...
Do you have a link to the handle bars? Love your bike!!!
Ebay
Looking good man! Where’d you get the bag?
EBay, But ai took it off. Ordered a better one from La Rosa side bags. They custom stuch them to order. Cost a bit more but its worth it the other one already started to fall apart.
I need a parts list🤣🤣
Preciosa❤️
Thank you
where can i get the side fairings and fenders?
Might have to go custom made. Some people take there front fender, chop it. Then turn it into the rear fender...
Looks good. Jealous.. lol
Did ya re-jet the carbs? Ya keepin the chain guard? ⛓
Lol thank you. Check out the update videos, new chain,guard off, new seat, new bag, I did get a jet kit and air intake. Just haven't installed it yet. Part 3 is the chain and seat swap
Looks great! Where did you get the seat from?
Seat- Ebay just search universal bobber seat. Make sure to make sure it will fit your bike. It usually gives you that check to make sure it fits option. You may need to Modify your seat pan a little. Or it may just slap right on. The springs are a Bitch to put on. I used a telescopic magnet to get the first few turns. Then the rest was easy. I had to figure it out the hard way, but I figured it out...
@@coachrubenluna2729 awesome thank you!
What type of tire is this? rear tire? Thaks for answer:)
I'm sorry for such a late response. You probably already got tires already. But the name of the tired are SHINKO. They have.been around for a long time. They are nice and sticky tires. They ride smooth as well...
did you rejet the carb
Not yet. I got a stage 3 jet kit, also a new high flow air cleaner. I want to reset when u get the air cleaner in 1st
How to build one for e
Nice job 👌 where did you get the new exhaust from?
Ebay
Thanks
@@coachrubenluna2729 do you perhaps have a link to the seller? 😊
Just type up shortshots staggered exhaust pipe for your year, make, model. It should come right up...
Why did you leave the rear pegs?
I'm debating on adding a small rear fender for a passenger
Beautiful bike! How many miles on it when you bought it? $900 for that bike is crazy!
Looking for shadows to buy right now, but I’m concerned on the mileage aspect. How many miles can these engines usually take?
35,000
Thank you!
Insa ?
Siick!!!!!
Thank you, I'll post a update video soon
I order all parts i need for bobber i am ready 2005 vlx 600
at the end there were some horses gallopping?!
LOL I'm not sure
On Brasil 50k bike and 70k in parts and 100k order
Total 300 k impost includ
Is that a good price for over there? Ive done a few other mods. Gonna drop another video soon
without Fender !?
Yup I like the look. But may add one on later...
Tire specifications?
When I get a chance Ill check. But the tires are OEM in size
@@coachrubenluna2729 hey anything on those tire and rim specifications? Are those the stock rims?
I bought these same white walls from amazon and my front tire they sent was not white wall so mad.
Please post the link to the seat pan or give the dimensions!
Ebay
How much for the exhaust pipes?
I believe they werec$180 more or less, just type your year and model
@@coachrubenluna2729 thanks Honda shadow spirit 1100
Nice
Thank you!
Where did you get the exhaust and handle bars from?
Ebay