Great work! Tbh, the bike was already looking really nice. I like people restoring/customization bikes that look like they have been neglected or abused. Such transformations are much more inspiring to me.
superb work and very nice line on this bike! with a splendid rear, bravo for the exhaust pipes! giving a second life to a shadow always remains a dream...there! it is done in a beautiful way
Beautiful bike! I’m in the market for one so I’ve been looking around lately. It’s either this or a Yamaha vstar. The bobber builds are just beautiful bikes all around.
Great improvement! I have to say that the VT is up there with the Virago for having the ugliest frames on bikes that you would normally want to be on show.
Very nice build, would you be okay with sharing your design for your seat, length of cut on frame and design for your fabricated seat bung mounts, appreciate your help. 11:56
I am in the process of building a bobber now out of a 2000 shadow. If you do t mind me asking what did you use to cover the frame under the seat were you made the cuts
@@Arthur-osama i have a Kawasaki Vulcan 800 Well my VN is at mechanic for like a month now, should be done next week FINALLY Till i get it back a friend borrowed me his Sym Husky 125 😂 so slow,a scooter basically 🛵💨 but better than nothing :P
Ahahaha been 2 months and I'm still a pedestrian İt was the starter clutch the problem after all İ HOPE Had to order it from Japan... could not find it here in Romania Ordered it 2 weeks ago should arrive this week and hopefully next week i get on my bike İ rly need it in June for a couple bike fests
Nice but only cut down rear fender added a springer seat, new pipes, probably rejet carb and paint. If you do a complete teardown make it a Lil more "custom". But I don't know your budget.
Vraiment belle !! Petite question, je compte faire des modifications sur une virago, avez vous souvent a faire a des contrôles/amendes concernent la plaque d'immatriculation noir et les rétroviseurs embouts de guidon qui sont pas homologué je suppose ? Merci beaucoup
Pour la plaque en noir j'ai pris un petit risque les effecitvement se n'est pas homologuer je me suis deja fait arreter une fois j'ai juste pris un avertissement pour me dire de changer la plaque....sinon c'est 90€ d'amande donc si vous ne voulez pas etre embeter rester sur une plaque standart....pour les retroviseur par contre pas de soucis j'ai posée directement la question au gendarme quand il m'on arreter et pas de soucis de se coter il m'on affirmer que j'avais le droit de les mettres
I didn't like the end result, a vehicle in which I can't ride with my wife is something inconceivable to me. The fenders were very close to the wheels, but the color was beautiful and the exhaust pipes were also beautiful, certainly. Anyway, congratulations on the work. ✌
@@Arthur-osama yes I wouldn't mind doing that to get the look! I've got a buddy here in Texas that's gonna do it so I'm referencing your video to him ! Great context! Is there a specific carb kit you used ?
![BOBBER BUILD - Yamaha Virago 1100 [HD]](http://i.ytimg.com/vi/pAhhyGae9oA/mqdefault.jpg)
![BOBBER BUILD - Yamaha Virago 1100 [HD]](/img/tr.png)
That sound is awesome.
Bike looks beautiful. Great work!
Great work! Tbh, the bike was already looking really nice. I like people restoring/customization bikes that look like they have been neglected or abused. Such transformations are much more inspiring to me.
superb work and very nice line on this bike! with a splendid rear, bravo for the exhaust pipes! giving a second life to a shadow always remains a dream...there! it is done in a beautiful way
Thank you so much for yout comment ! I'm glad you like this restoration 🙏🙏😁😁😁😁
Killer work! The exhaust sounds as good as it looks!😎👍
Thank you my friend 🙏🙏😁😁
love the color, it looks incredible
Superp bro i like it
Keep strong bro ❤❤❤
Beautiful bike! I’m in the market for one so I’ve been looking around lately. It’s either this or a Yamaha vstar. The bobber builds are just beautiful bikes all around.
She's a beauty. Good work.
Thank you 🤩🤩🤩
Gorgeous bike, love the exhaust. Looks like you were able to do it all pretty quickly too
Thank you kris for your comment 🙏,i finished this bike in 4 months 😁👍
Ein Traum, habe mich verliebt in ihr..❤🤪🤪🤪🤪🤪🤪😄
love how you put the rear fenfer great job beatiful bike
Thank you my friend 😁😁🙏🙏
super clean, great work
Hell of a job!!! These hondas make some nice bobbers
Thank you 😊😊yes honda bikes is good for make bobers 😁😁
Superb job. Inspirational.
Thank you 🙏🙏
Looks great. I like everything except the stock air box.
Looks nice and sounds awesome
Thank you 😁😁😁🙏🙏🙏
great job. sounds fantastic!!!👍🤙 thank you for this 15 minutes.
looks good sounds even better
Wicked finish 🔥 quick ride would be nice tho
Great improvement! I have to say that the VT is up there with the Virago for having the ugliest frames on bikes that you would normally want to be on show.
wrap those pipes cus they melt the boots
Awesome job!
Thank you so much 💪💪
Super sweet 😮
Very nice build, would you be okay with sharing your design for your seat, length of cut on frame and design for your fabricated seat bung mounts, appreciate your help. 11:56
superrrrr motor❤
Wow incredible job!
Nice!👍😎
nice work man
Thank you so much 🙏😁
Show 👋👋👋👋👋
I'm a Harley rider I build bobbers out of them but this bike is cool nice job I have seen some cool metric chops and bobbers 👍
Nice bro..👌👌👍
Thank you bro 🙏🙏💥💥
Nice 😎😎
Beautiful, great job!
Félicitation y'a pas a dire c'est vraiment une restauration ULTIMATE ( subaru un jour subaru toujours )
Merci skynet sa fait plaisir 😁😁😁
WOW!
Awsome!
Nice work ,the only thing thats going to spoil it is number plate
I am in the process of building a bobber now out of a 2000 shadow. If you do t mind me asking what did you use to cover the frame under the seat were you made the cuts
It sounds great, but it would look a lot better with a solid chrome exhaust.
Stunning 👍
1 funky bike 🥳
Thank you 😍
Pfouahhhhhhhh magnifique travail !!!!!!
Merci beaucoup ! 😁😁
Nice
Exhaust note sounds great 👍
Thank you 😁😁😁
That sound👌👌
😮 AMAZING 👏🏻 💚
Good job,i don't like bobbers but looks sick 👌🏻
Thank you my friend your comment makes me happy 🙏🙏😁😁
@@Arthur-osama i have a Kawasaki Vulcan 800
Well my VN is at mechanic for like a month now, should be done next week FINALLY
Till i get it back a friend borrowed me his Sym Husky 125 😂 so slow,a scooter basically 🛵💨 but better than nothing :P
Ahahaha been 2 months and I'm still a pedestrian
İt was the starter clutch the problem after all İ HOPE
Had to order it from Japan... could not find it here in Romania
Ordered it 2 weeks ago should arrive this week and hopefully next week i get on my bike
İ rly need it in June for a couple bike fests
Awesome!
In my heart and mind I would love make my Steed rear fender just like this, but unfortunately will not work on our wet road. 😭
beautiful sound
❤️
Kirrály !! (king !)
Super taff, rien à dire une bête maintenant.
Merci beaucoup sa fait super plaisir 😁😁
Great job looking awesome bud, could I ask what risers and bar you used
Very nice build and video! Did you make any changes to the carb? Like jetting it?
Thank you ! Yes little jetting upgrade like 5 points
just no words ahaha👌
Thank you 🙏🙏😁😁
@@Arthur-osama tchau
Nice but only cut down rear fender added a springer seat, new pipes, probably rejet carb and paint. If you do a complete teardown make it a Lil more "custom". But I don't know your budget.
tres bien! very nice, color looks amazing.
Merci beaucoup 😁😁
Trop belle ❤❤❤❤
Merci beaucoup 😁😁😁
🤙🏻🤙🏻🤙🏻🤙🏻
Sounds like a sponge bob bubble maker
I'm getting ready to do a similar build, when you went with open exhaust pipes did you have to reset the carburetors ?
hey first awesome project! but I'm just wondering how much money you've invested because I'm considering doing something like this myself
Thank you so much ! Im think arround 1500 $ 🤔
geil
The iron has become hot!
Combien coûte la fabrication d’une de ces machines ?
Vraiment belle !! Petite question, je compte faire des modifications sur une virago, avez vous souvent a faire a des contrôles/amendes concernent la plaque d'immatriculation noir et les rétroviseurs embouts de guidon qui sont pas homologué je suppose ? Merci beaucoup
Pour la plaque en noir j'ai pris un petit risque les effecitvement se n'est pas homologuer je me suis deja fait arreter une fois j'ai juste pris un avertissement pour me dire de changer la plaque....sinon c'est 90€ d'amande donc si vous ne voulez pas etre embeter rester sur une plaque standart....pour les retroviseur par contre pas de soucis j'ai posée directement la question au gendarme quand il m'on arreter et pas de soucis de se coter il m'on affirmer que j'avais le droit de les mettres
@@Arthur-osama niquel alors merci pour votre réponse aussi rapide aha 😁
I didn't like the end result, a vehicle in which I can't ride with my wife is something inconceivable to me. The fenders were very close to the wheels, but the color was beautiful and the exhaust pipes were also beautiful, certainly. Anyway, congratulations on the work. ✌
Muy buen trabajo 👍👍
Thank you 🫶🫶
You you cut off the rear fender mount and it seemed as if you put something back them under the seat area what is it?
Taka ładna fajna była ta honda oryginalna to tak to zepsuliście
Wow! Raw Fucking power
Thank you 🙏😍
Ajusta las válvulas 💥💥💥💥
I have bad jetting setup on the video 😅😅
Más hermosa que antes
gostei ficou mais bonita😎
Luv the exhaust! Can you share info about it ?
Tape "ice exhaust" on google ;)
Bacana e o melhor fácil...
Looks amazing!... Have you ever burnt your legs on that exhaust?
Nice Bike Fantastic Color.. Can u please tell the code of color to find it for my bike?
Yes the color is "isle of man green" ans the color code is C4G ;)
@@Arthur-osama thanks a lot my friend!! 🙏
What kind of bracket did you add to the frame where you cut the rear fender support? Excellent job.
I put a reinforcement tube for the frame, and integrated screws to fix the saddle
Thank you 🙏😊
😍
Looks lovely but, Do you not burn your legs on the exhaust?
No probleme with the exhaust and legs 😁😁
Odd question but can u send me a list of all the parts you used I’m in the process of the exact same build
Stock handle bars or aftermarket? If latter, which are they ?
How much cost a rework like this? If i buy an old model at 3500 € how much im gonna spend for a customisation like this?
Mhhhh i think 2000€ to 2500€ for the transformation....for exemple the exhaust cost 700€ de painting job 500€ new tire 300€..... 😅😅
What rear fender is that brother?
kool, whats the length od yr petrol tank
did/does honda make a bigger displacement version of this bike?
They did a 750 and an 1100 if I remember correctly. The VT600 was my first bike back in the 90's.
Como amo me gustan una buena boober lo que quedó fea es el color Verde negro sería más bella
Nice!!! What name the color green please???
Its a bmw color the name is green island ;)
Someone is selling one for 3k with 75k Kms is it worth it.
nice bike but the exhaust sounds liek a bubble machine
era mas bonita en su estado original!!
do you mind putting the link from where you got those exhaust ???
I have write the link on the description video ;)
Where is your shop !!! Got an 88 600 i wanna get done like that !!
Sorry my shop is in france 😅😅 would you cut the rear subframe ?
@@Arthur-osama yes I wouldn't mind doing that to get the look! I've got a buddy here in Texas that's gonna do it so I'm referencing your video to him ! Great context! Is there a specific carb kit you used ?
Hi man where did you get the back fender ?
Hii ! On TJ brutal customs website ;)
Snack bonjour
What’s the year of the bike?
It's a 1996 bike ;)
Where can I get this exhaust setup !!?
The exhaust come from poland go on google and tape "ice exhaust" ;)