These SPEAKERS are going to CHANGE the Industry - Everything we know about the SVS Evolution
Vložit
- čas přidán 16. 05. 2024
- #hometheater #hifi #audiophile #ces #ces2024
SVS Evolution are going to change the industry forever. The amount of innovation that is in these is unheard of for speakers in this price range. Join me, as I, along with Nick from SVS exhaustively go through the SVS Evolution speakers, so that you could get the most information about these.
Buy SVS: bit.ly/SVSSpeakers or amzn.to/47L1Bzu
SVS Cables and Isolation Pads: bit.ly/SVSAccys
🔊🔊🔊Buy Speaker Crossover parts: US and Canada: parts-express.sjv.io/jW7oZb get 5% off with code TOID 🔊🔊🔊
UK and Abroad: bit.ly/3skOGRJ
Worldwide: Amazon: amzn.to/3aPh
📄Speaker Plans: toidsdiyaudio.com/shop
🔥 Where to Buy Speaker Crossover Parts and Kits:
US and Canada: parts-express.sjv.io/jW7oZb get 5% off with code TOID
UK and Abroad: bit.ly/3skOGRJ
Worldwide: Amazon: amzn.to/3aPhKYD
Car Speakers/ Home Audio and electronics: howl.me/cg5oP9UKd1Z
🏠Get Whole House Audio:
Arylic: bit.ly/2wFUUQ4
🍿Theater Seating
Valencia Theater Seating: bit.ly/3Jbagjm
📄Speaker Plans: toidsdiyaudio.com/shop
🎙️Sound Advice Podcast: anchor.fm/sound-advice8
🎧Buy Audiophile Headphones: howl.me/cg6GDjmAHzS
🆓Get it with Prime - Free for your first 30 days: amzn.to/326cZqe
FREE Audio Books for 30 days from Audible: amzn.to/3a7lBS9
👋Connect with Me:
www.toidsdiyaudio.com/forums
🤝 Support:
Patreon: / 123toid
Disclosure: This channel is viewer-supported. When you buy through links on my site, I may earn an affiliate commission. I only recommend products I would use myself and all opinions expressed here are my own.
Game Changers 0:00
Physical Time Alignment 0:19
Force Balance Array 4:20
Not your typical Tweeter 6:26
Woofer Material matters: 8:11
Tweeter Diffuser has Technology? 10:19
Always a 3-way Center 10:19
Atmos Speakers 13:00
Evolution Bookshelf Speakers 14:07
SVS sells Speaker wire? 15:32 - Věda a technologie
Nicolas- I watched every CES SVS video and by far, you had the best overview, asked great questions & explained key concepts! Love that you mentioned waterfall graphs related to quick start/stop. For those unaware, can you explain/expand on this and/or link a video?
Thank you Dave. I don’t have a video explaining waterfall graphs currently. It might be something in can do in the future. Explaining speaker measurements in general.
Hi there I want to know what size plastic box you would recommend for putting 6.5 1/2 150watt marine speaker both fit on the front of the box please get back to me thanks
Time will tell, but I don't think these gonna change anything. Some people just want cheap speakers, others want high-end... There's a market for every product, but to say they're gonna change everything is a pure overstatement.
Yeah it's just youtube hyperbole.
I agree, time will tell. But in this price range they are really innovating and providing a design that would typically cost significantly more. Hopefully this will help push other manufacturers to do the same. If so, everyone wins.
@@Toid Let's hope for the best then.
It is SVS's big infinite lie! If technology like that, which is at least 20 years old as long as a human life, is said to be revolutionary or a new product design that will change the world, then huh huh liars!
So what does the genelec 8381 flagship speaker dsp/full digital and also an analog speaker do for this with 12kw power? Maybe the quality of the sound is worse? The certain price is bigger, of course, but it was about exposing the lie with which these SVS: fraud-happy market-minded swindlers are now happily poisoning people. Of course, they may be good in their opinion, but they are far, far from the cutting edge of current technology. At least 20 years.
Americans lie all the time and very often things are exaggerated on almost every you tube channel these days. They are absolutely outrageous!
Thumbs down!
Very cool stuff SVS is doing, but physically aligned designs are hardly anything new. I had a set of Dahlquist DQ-10s that did something similar in the 70s I think, but much less elegant.
Either way, I would love to hear a set of these.
You’re right. Physically, time aligned drivers are definitely not new. But when you add everything that they’re doing together at this price point, it’s pretty unheard of. It’s more impressive that they’re doing all of this in a price range that is accessible. That’s where things get very interesting for me.
Time alignment is a marketing gimmick! Scientifically it doesn't make any sense... don't believe me? Read floyd toole's book.😮
@@Toidyeah, as I was watching I said it better be the price. Of course non-diy almost always sounds expensive to me but if someone is not a diyer yes it can be looked at as a good deal, guess it depends on if one likes their sound or not.
Anyway good job covering it!
I thought the phase delay of a passive crossover minimizes the benefit of this curved baffle.
No need for both.
Depends on the crossover design , several company's been building speakers this way for decades with very good results. So I feel it's a step forward in there design
@@carlosoliveira-rc2xt I have heard some steped baffle speakers that sound amazing. Ya I did not try testing them with and with out the step baffle thats impossible for me I don't have that kind money or equipment. But useless and next to useless is not the same thing. When you get to higher end speakers it's the sum of many many small things that make the speaker just that little bit better or worse. And if it was so useless why have so many amazing speakers and speaker designers all made there endgame speaker designs using this feature ?
@@carlosoliveira-rc2xtYou're right. You would need to do quite a bit more to this speaker just to equal what was done over 40 years ago. And at a reasonable price. Just to be clear, though, I'm not saying that its a bad speaker. To be honest, the tittle of the video got my interest. The nicest thing I can say here is that he needs to learn a bit more before he tells other people what to do. Seems like a nice guy, but definitely new to audio.
Flat baffles are easier to build but usually means more elements in the crossover.
Time aligned .. only if your main listening height is direct on axis with that tweeter height off the floor.
.. Personally.. I think they could also include a kit for tilting the towers back to align for different heights / Isolation feet package.
It's the Focal Kanta / Sopra looking baffle. / Wilson Audio style ( as well as a ton of other brands have done this )
REALLY cool .. and we'll see how they measure up in due time. =)
Yep and you have to sit on the ground for that to happen
I like your anthousiasm ;) . The alignment is more relative to the emissive parts of the speakers than the position of their magnet in my opinion. This type of configuration already exists at Focal for example. The Utopia series, which takes into account horizontal and vertical alignment, but also a box for each speaker.
Separate boxes don't mean anything it's about time alignment of speakers in a box basically they are copying focals design in one box.
Has anyone told you that you look like Patrick Stump's twin that decided to go into audio: speaker making instead of audio: music making?
Thank you for the informative video. Did enjoy.
Glass fibre has been used for a long time. I remember Focal using this material over 20+ years ago.
Agreed. I love glass fiber. I used one many years ago in a a DIY design. I just found it interesting that SVS was very cognizant of why they were using glass fiber versus just any material that they could use.
@@Toid@Toid Do you have any experience with woofers made from the multi-ply carbon diaphragms (I think they call it TexTreme)?
@@navinadv I haven’t used the woofers, but I have had experience with Textreme used in compression drivers, such as the N314x-8. In fact, I did a video with Eminence where they go over why they like it so much for their compression drivers. But in general, it appears to be a very nice material for drivers. there’s already been quite a few companies that have started using it with success. I’m looking forward to seeing more of it.
Was about to pull the trigger on some Klipsch RP8000 to go with my loved SVS sub, but now I may have to wait to see what SVS has came up with for HT sound. Always love what SVS does and their customer service is A+ just felt the SVS are great they fell a step behind on Klipsch for sound stage for HT
Love my RP8000's I picked up for dirt cheap recently new...
Looking good ! 😂 Cannot wait to hear them in person
Thanks for going over these new speakers!! I’m excited to see the reviews!! I’m glad they are making a “middle road” size tower also!!! The tower with 4 -6.5” woofers fits my space perfectly (plus cost is less).
Just curious, do those guys in the background not realize you’re trying to make a video that 1,000s of people are going to see??!! Umm… 🎉
I’m glad you enjoyed the video. And I agree I’m glad that they’re making a couple different sizes.
I’ll be honest, I sure did laugh out loud when you put that last comment up . That was pretty golden.
How low will the frequency response go abd what is the power rating? Are these 8ohm speakers?
Some cables for RCA receiver pre-amps to power amp inputs would be nice for the accessory lineup as well.
hi,just found your channel and enjoy your content.i just subscribed as well.
My concern might be the height of the tweeter off the floor Is it ear level?
With a concave face, does this mean there is an optimal distance for them? Given how some people spend ages positioning speakers (me for one) for optimal sound with what we have, this almost seems like adding another thing to need to consider.
DSP and acoustics are the solutions to problems.
What are the frequency responses.
Are the grills made of plastic or metal? Are the cabinets made with High Density Fiber of Medium Density Fiber board?
Should I pull the trigger on some SVS Prime Bookshelves or Towers at their discounted closeout price to replace some Infinity Primus Towers or wait for the SVS Evolution reviews? I've a 5.1 setup with an L shaped couch with multiple listening points.
Honestly, I don’t think you’d go wrong with the SVS that their discounted price. Especially since we haven’t measured the evolution yet. They have some really great design ideas, but we’ll have to see how well they were implemented later.
They look good! But I wish there was driver trim rings to hide the screws for a more modern look
That would be a really nice touch!
Okay they look good, but let us get real here. How do they sound in your room, my room, or with various equipment? Looking pretty does not mean a thing.
You’re right. There’s a lot that we don’t know about yet. And listening to those speakers in that type of environment, will never give you a great idea of exactly how they sound. it won’t be until people get them in for review and can do some testing in various listening areas that will get a good idea of exactly how good they sound. I am intrigued with everything that they’ve done for the price that they’ve done it for. so it will be very interesting to see how they do in the real world.
SVS has done pretty well so I'm sure they put some $$$$ into the R&D. They look and sound good on paper. Time will tell if they chage the game as there are already great performing speakers in the $5k range.
I can't find any spec for what slopes they use in the crossover, do you know? I'm a Dunlavy owner (SC-V, SC-IV & SC-III), so seeing SVS' claims makes my spidey-senses tingle a little bit. John Dunlavy showed that the only way to have accurate time-aligned passive speaker was with 1st-order crossovers, stepped baffles and sealed enclosures. Ports make the Q go way high, and 2nd-order and higher crossover slopes cause the impulse and step response to measure like 💩.
They really nailed the design. Focal has been big on this for a while, but the SVS looks much more understated and simple. They did a really good job modernizing this design, and at a lower price point no less.
I agree. The biggest thing for me is the price point of which they’re able to do this. Making it a lot more accessible for those that don’t/can’t spend the focal money.
And they are still inflated.
What is the retail price
@@pataldorr 3 Towers: Ultra Evolution Pinnacle is $5K/pair; Ultra Evolution Titan is $4K/pair & Ultra Evolution Tower is $3K/pair.
The Ultra Evolution 3-way Center is $700.
2 bookshelves: Ultra Evolution Bookshelf is $1,200/pair & Ultra Evolution Nano is $800/pair. Ultra Elevation height is $800 each.
0:04 What is that triangular wall covering in the back? I have seen it before and want to know if it is a product.
You can get them from my Amazon link: amzn.to/3SboWEX
Reminds me of the Dayton array. Great idea with an assortment of problems, but they (taken from reviewers) sounded great.
They did sound great. However, critically, judging speakers in that type of environment is impossible. Hopefully I can get some in and give better judgement to the sound quality.
These will not change the industry. Of this, I'm sure.
genelec ones, master series, and new 8381 is perfect.
Time alignment will only be possible in one position. Once you move a touch in any direction it won’t. Plus it doesn’t make a difference
We really need to see the measurements first on these speakers before making any assumptions
Time alignment works in this design perfectly in the horizontal axis and then has a gentle roll off in SPL in the vertical axis.
Vapor deposition was used by Yamaha starting in 1975 in their NS-1000 and 1000M series speakers. Old cutting edge tech.
You’re right. Most of the technology used in the speaker isn’t anything new. But it is new in this price range. I’ve always really liked glass fiber mid range. I’m tired of all the aluminum or cheap basic paper woofers. Give me some textreme, glass fiber, bamboo. But make sure you give me a reason why you’re using it. Don’t just use it because you’ve been using it for the past 20 years. I appreciated Nick knowing why they used that particular type of driver.
It is not time-aligned if I stand up.... there should be a sensor updating vertical time alignment in real time, from whether I stand up or sit down.
Why would you be purposefully listening off-axis in the vertical axis?? Your argument is simply that. An argument for arguments sake.
Waaww what a "game changer", what a "revolutionary" approach :)) OMG !! Great advert "chat". If you got some bonuses for this, I understand doing this.
I am singing off.
That's actually impressive! (Coming from an engineering background)
But Toid, who wants the game to end? 😮😂 I play to play.
So true 😂🤣😂. What was I thinking 🤔
Looks awesome. Aluminum dome tweeters give me headaches though😢
A lot of them have very strong, breakup modes that I don’t appreciate either. Supposedly this diamond coating helps prevent that. Unfortunately, critical listening in an environment like that is very hard to do. Hopefully I can get some in when they come out, that way we can see if that helps.
@@Toid I had a pair of Cantons that had a ceramic coating on the aluminum dome, it didn't help. Had to return them. Hopefully svs figured it out with the diamond. At least they make returns very easy, so you can try out and see. Those things seem like a pain to pack back up and return though. If they had a different tweeter I'd be much more likely to buy then. I really like the concept of them.
@@Pete.across.the.street I agree. I definitely would not want to return them.
Can someone tell me why comb filtering wouldn't be a problem with two mid drivers? Am I missing something?
Comb filtering is not as big of an issue when your drivers are stacked vertically. It becomes more of a problem when drivers are aligned horizontally, like a center channel.
@@chrishernandez2490 Got it. Thank you.
They are mounted close and only allowed to play in a certain band of frequencies so that they're combined output is summed. There is no comb filtering.
Yeah sure???! Make believe a synthetic reality???@@MyFatherLoves
Wonder what crossover guy will say?
I really like SVS. I don't think their subs are a great deal anymore, but I have a pair of pinnacles and they are fantastic. I do think this new naming convention is silly.
The addition of the output of all the drivers works great if your ears are opposite the tweeters. If your ears are higher or lower than the tweeters, there will be more peaks and dips in the response because of the multiple drivers.
Passive crossovers create inherent phase shift. While the drivers can be in phase with each other at the crossover frequencies, there is nevertheless a lack of timing coherency across the audio spectrum. It is simple physics and math. Only DSP FIR type crossover filters can fix or prevent that.
Other than those issues, these might be quite good speakers
Thanks Canelo for updating us. By the way when did Canelo become a speaker salesman
Listened to the Duntech Crown Princess loudspeakers at the Winter CES of '87. Similar meme employing the Dynaudio line of transducers, when they'd sell their drivers to individuals. Maybe best sound of the Show, although the Lazarus Tube electronics driving the Apogee Planars were also very good. Nothing new under the sun.
Awesome Video!
1. Do you think that the SVS Ultra Evolution Pinnacle Speakers sounds better than some of the open baffle speaker you have heard?
2. What is the most expensive box speakers can the SVS Ultra Evolution Pinnacle Speakers can equal or beat in sound?
Those are good questions that I honestly can’t answer at this time. I would want to hear those in my environment that I’ve heard other speakers. Listening to them in the environment that they were in is very hard to judge critically.
I understand it's clickbait and I like cheaper speakers who look cool but this is not groundbreaking...
I’m not sure of any other speakers that push the innovation in this price range. But I definitely don’t know every speaker. If you know of any, let me know because I’m very interested.
@@ToidVandersteen Model 2. Its more advanced that the SVS. Not only are the drivers time aligned, the speaker is phase correct, as well. The drivers on the SVS don't all move the same way, at the same time. One driver may move out while a different driver may move in the opposite direction. On a phase correct speaker, all of the drivers move in and out at the same time. The cabinets are more advanced as well. The mid and high frequency drivers each get their own enclosure, and are not part of a bigger cabinet. Doing it this way all but eliminates box colorations. Setup and positioning is also way more advanced. You can dial the speaker in to your exact listening position. They give you a formula where you input certain distance measurements and adjust the back tilt of the speaker. The back tilt adjustment allows you to keep the signal time and phase correct at your listening position. The SVS can't do that. You get one optimal distance, You can't fully compensate when you move your listening chair to a different position.
I'm kind of surprised you haven't heard of these speakers before. The Model 2's are the biggest selling high end speakers ever made. They've been in production since 1977.
I agree these will change the industry! They took advantage with the finish and general design to get something that doesn't give you audiophile bull shit, but would in fact be hard to achieve in the look if you were building DIY speakers!
what is the revolution?
Please tell me they are gonna have outrigger feet
the tweeter is located very low
They didn't say directly that the speakers are indeed made for dwarf men and women.
@@oliivioljy9700 It's just my experience that tweeters should be in ear height for the best sound stage
It looks like a d'Appolito, did you at least offer Joseph a token amount?
Focal has been doing this for 30 years
I’m assuming you mean the physical time alignment which, yes there have been. Along with others. What we have not seen is all this technology in one tower at this price point. That’s the difference
DIY skeptics, there are no insurmountable problems to reproducing a similar design. DIYERS have been using this configuration since the early Audio Amateur mag days.
I’m not talking about exact duplication, certainly not voicing either. What’s the problem? Exotic tools, lack of courage?
It’s an interesting challenge for which SVS has chosen a very appealing scale, as opposed to Focal or Wilson Audio. Fear of producing the proper curvature, take Calculus 1.
The best speakers I’ve ever heard in my life were the danley sound labs synergy horn, all the teeters mids and woofers were horn loaded into one giant horn mouth. Insane sound, they all merged together perfectly
Danley makes some killer speakers. I heard their “EDM Stack”, which was basically 2 sets of subwoofers with a SH96 on top of each set of subs. Just amazing g
@@broosky333 yeah I wish I had the skills to design just 2 of those horns for my home theatre L and R. I have an acoustic engineer friend who designed a pair for his vehicle doors and gave me the design for free ( he reverse engineered it) but I don’t have the time patience or woodworking skills to recreate that. Maybe one day
@@modernbassheads5051 same here. I have seen some designs people have made online, but I lack the necessary skills to actually build them. I don’t think I could cut a set of 2X4s the same length first try. Lol
@@broosky333 yeah the angled cuts are not easy
That’s awesome
I don't want to be a party crusher but Focal has this design fro decades...
Doesn't the curvature of the speaker limit the dispersion? I would have to imagine these are targeted towards 1 person 2-channel listening. Also, this kind of setup isn't new, which makes this video seem like an advertisement more than anything else, tbh.
Physical time alignment, which is the only thing that you’re focusing on, is not new. What is new is the additional physical time alignment plus everything else that they’re doing at this price point. What I am referring to is that typical speakers in this price range have always been built the same way. If someone can be successful with these types of designs at this price range, other manufactures will have to adapt to that. Which should mean better speakers at lower prices. If I had to do it over again, though, I would’ve said, has the potential to change the industry. Which really is what I meant.
Lol, physical time alignment has been used for decades as has d'Appolito driver arraignment and tweeters that have gone up 30K. Nothing "game changing" here.
They look like the Focal Kanta speakers
At a much more affordable price.
Cool
Keep my Legacy Focus SE
Are you working for SVS now? Serious question. Seems like it here. I'm a new subber but have watched you for a while off and on. Maybe sponsored by SVS?
Nope. This was just at CES and I wanted people to see the new technology coming out. These do have me very intrigued at their price point. They have put a lot of time, effort and research in making the speaker different/better? than what you’d normally expect or get in this price range. It’s exciting….if it ends up being as good as it is on paper. Luckily we should find that out soon enough. Coming from a DIY background you just see so many companies making so many compromises that affect the overall sound quality. It’s refreshing to see a company that appears to be doing it the right way.
Arendal 1723 is hard to beat.
Absolutely great speakers.
Got your back Toids. Time for a clone, non-profit for the MASSIVE DIY population.
I’ll be honest, I think it would be very hard to duplicate something like this in the price range that they’re doing it. But it really would be awesome.
@@millenniumrun9995 haha! There’s a speaker for everyone. And not everyone wants to DIY. But it is nice to be able to look at it from the perspective of someone who does design speakers. I do appreciate that SVS is bringing a lot of the things that we DIYers already know makes things sound good. Good bracing, reducing cabinet resonance, paying attention to materials they use, and how that affects the overall performance of the. I find it refreshing manufactures are doing the things that we know are important. Let’s be honest, many manufacturers do not do this.
@@millenniumrun9995 Point?
Amazing to have that attitude on a video filmed at a trade show, the Consumer Electronics Show, THE premier trade show of the year. My guess is you really don't follow Nick. Otherwise, you'd have known that a number of videos coming up were/are based on the event. Just grab a drink and chill for a few until the normal programming resumes.
diy, yeah sure. that’s like saying. oh i can just build my own better ferrari than buying one. umm no, u can’t.
I came to watch and like. So. 👍
manners ! 6.37
That’s a lot of words and not a lot of data. Show us the crossovers to see the parts qualty and provide official measurements.
AH finally the poor man's WAAM Chronosonic...
Compared to the WAAM, very poor man 😂🤣😂.
Great interview and showcase of a SVS new product line up the best review of this product on CZcams so far, keep up the good work.
Americans often lie on CZcams. Even now, they did this very brazenly.
Thank you! I appreciate it!
The speakers are nice and all but I'm not impressed till I see the crossover design.
Absolutely we need to see measurements before we can make any final judgments on any speaker. I’m just happy to see that a mainstream companies starting to really think about these things. Most of the time these are relegated to much more expensive speakers.
Price$$$$$
Not cheap i think the cheapest towers are 2000
The all new World's first GRANITE Open Baffle Speakers from MACO Acoustic are REVELATORY ! Wait until you hear these speakers....40% off right now $8K a pair
That sounds pretty awesome! I would definitely be interested in that
How could you say change the industry when we dont even get to hear them?????
Typical American liars. There are plenty of these people on various CZcams channels in America these days. They don't even want to notice poisoning people in themselves.
Nothing new, lots of speakers with aligned drivers, a good messurement is that the voice coil of all drivers are aligned.
Go listen to a multi entry horn and tell me about “changing the industry”
Only intended for music in a very, very narrow field.
I wonder how efficient they are
Motor structure is more important than cone material.
We need to see harmonic distortion charts.
This channel now is now nothing more than paid advertising flat-form.
First 😂
Dang you were fast!
How are these speakers going to change the industry? They made half of a time and phase correct speaker. They time aligned the drivers but didn't use first order xovers. Time aligning the drivers is a good idea, but if you don't use a first order xover, the drivers don't start and stop at the same time. One driver move in and the other moves out. They should have finished the job.
This is also false. We actually have no idea what order of crossover they're using. You're most likely correct that they are not first order but you are very wrong in the sense that if they are anything other than 1st order crossovers that somehow the voltage from an amplifier reaches each driver at different times. "one driver moves in and the other moves out" this can be corrected with a simple reversal on polarity of how a driver is wired from the crossover. The baffle being curved lines up the woofers in the same vertical plane. This time aligns them acoustically.
UNFORTUNATELY SVS DOES NOT GIVE THEIR SPRAKERS TO REVIEWERS THAT DONT GIVE POSITIVE REVIEWS!!!!!!
Never heard that before. This is my first interaction with them, as I literally just met them the day before the interview. They were very nice and knowledgeable. I really enjoyed my time with them. And I appreciated their passion for audio. I know they did send Erin’s Audio Corner some speakers, which he took klippel measurements and did an in-depth review of them.
@Toid thats why Andrew wont ever review SVS speakers!!!!!
audioholics already reviewed their speakers. so yeah
@rushgush so what does that say???
@rushgush unless they bought out right.
i'm so done with the big bloated american marketing schemes on this channel. i liked the DIY videos from before. this channel has grown a very different direction from what i look for in youtube videos. unsubbed though i hope you are well, and i hope the channel is providing some nice income for you 😊
Bye Karen! 😘
Chill out dude... I'm a DIYer and all I'm getting is inspiration for my next build. Keep in mind, many just want to buy as well.
well happy to hear you get inspiration of course, that said loudspeakers have been solved many decades ago. no new tech partaining to dynamic loudspeakers will change the game, and the features of this new product will not translate to your future design. it is hype-branded with 'advancements in science' even though it's a regurgitation of tech from the 70s and 80s. nothing in this video (except for the motivation to start DIYing, of course) will improve your DIYing skills or your DIY builds, but it will distract you from finding out what it is that will help to improve. that said if you can hear past the inflated marketing jabber, and you want to buy, sure thing, and if you feel inspired from watching this video then fair enough as well. but apart from that videos like these offer nothing more than a '100k rolex watch show-and-tell' video
@@raoulselten9480 sure you may be right that it's technically nothing "new" except marketing jargin, but what is new is the accessibility of high end design like time alignment etc in lower and mid range speakers. I would also argue some technology is new and better, such as DSP, increased voicoil size and small boxes subs etc. The majority of consumer grade speakers from decades ago were extremely basic and weren't great.
As for inspiration, there is just so much to know about acoustics and design and preference that I like to take notes from major manufacturers like SVS and see what they do and see if I can implement some of their design in mine. They are currently way more expert than I am.
Not might be ,,, he is right. Do you need a short list of engineers that were doing this in the 70's,80's and 90's. Research it yourself so you can make the discovery.@@frostman9661
One very long commercial. 😩
I really appreciate your journalistic objective approach. NOT
Come on, you can do way better!
The bit about the bass drivers on the back is clear commercial BS. If it’s the way ‘they’ tell us, it would load the room beyond being listenable.
Force cancellation is nothing new and not marketing bs. it’s something that DIY have been doing for years, especially with subwoofers to kill cabinet resonances. That does work. However, I will be the first to admit that anytime you put a driver on the back, it can introduce other issues. So measuring them will be important. As with anything, we’ll have to see exactly how they measure, but everything that they put into it in the price range is pretty amazing. Hopefully this pushes more manufacturer to start incorporating some of this in lower priced speakers
@@Toid Could it be that he was 180 degrees out of fase?😉
@@Toid At the moment I’m doing a lot of research on ‘open baffles’. One of the big advantages is that the front and back waves cancel each other out at 90 degrees from the baffle. That makes the bass more or less directive. That cancels out a lot of room interference. The way it was explained was the opposite: you would get a doubling af the output at 90 degrees. That doesn’t seem logical to me.
Something that you're missing the explanation is that the "force cancelling" woofers both have power going to them. The woofer on the back is not a passive woofer. So, yes, in the super lows FQ band that's being fed to these woofers, there is a summation of signal.@@iwanoutmans3537
Nothing interesting here at all. Just an ad.
This snake oil …
There is absolutely nothing new about this line of speakers. How much were you paid to post these lies.
Nothing new? In this price range? I wasn’t paid. I’m genuinely excited. Of course it’s pretty easy to know someone’s paid. CZcams will Inform you with a big paid promotion banner that goes across the screen. I’m sorry you didn’t find what SVS is doing is exciting as I do.
He saying new to this segment of the market. This price range.
@@paulgood2218 thank you. That’s exactly what I’m saying. Maybe I should’ve been more clear on that.
Typical American liars. There are plenty of these people on various CZcams channels in America these days. They don't even want to notice poisoning people in themselves.
Are you guys really trying to say this alignment makes any sort of measurable difference to the human ear?!? lol
This type of micro measurement in relation to the speed of sound. PLEASE!!!
Forget the gimmicky sales pitch. In other words lose the BS and give us a quality product for a realistic price.
Getting tired of these self qualifying nerds talking about all these innovative technologies to over inflate prices.
True cost to build. Less than $500. Now give us $5000 because we have gloss white! lol
everything is gone up. look at the price of food….. 😂😂😂😂😂
physically aligning the drivers in the baffle actually does time align drivers.... It makes a huge difference as it goes a long way for helping the speaker be completely in-phase. This is objectively measurable and subjectively provides a far cleaner and clearer presentation of audio.
Your capitol words, excessive punctuation, and nonsensical attitude just make you sound like a fool.
@@MyFatherLoves Let’s see who the fool really is, shall we. “These speakers are gonna change the industry!”
The opening remarks from this video. Lmao
Only a fool such as yourself would believe this and actually respond in kind. Take your curved hockey stick speaker and measurable, physically aligned drivers and stick it where the sun don’t shine, Chump!
The only thing in presenting a cleaner and clearer audio as you put it lol is a well engineered crossover and high grade drivers.
SVS is gonna change the industry? Maybe for you!
Lul😂 industry? There nothing man . Not even proper midfi. Borresen x3 is the new midfi standard.
on atmos speakers and wall/sealing speakers! i dont get why, they dont make proper brackets!! its not that hard for them, to sell a bracket with ez mount. so you click/screw it on the speaker, and then you can mount it. to an arm to screw to the wall, and on that arm. you can angle, the speakers ez. so the arm can be ez adjusted, to point it where it needs to play sound at! why has nobody made such mounts
More hype than reality. Time alignment is changed by turning your head slightly.
Verdict: bullshit.