NEW BigAir Vent Sizes - Prevent Condensation & Heat Issues in Your Shipping Container

Sdílet
Vložit
  • čas přidán 16. 07. 2024
  • Timestamps:
    0:00 Intro
    0:29 Shipping Container Requirements
    1:05 The Biggest Problem
    1:38 The Solution
    3:24 Big Air 45 Install
    7:00 Outro
    BigAir Louvered Container Vents (sizes: 30, 45 & 60), come with a marking guide to make cutting a hole as easy as possible! Rivets and self-tapping screws are also included (we recommend using rivets).
    A minimum of two vents are required per container for temperature & moisture control in temperate climates. Four vents per container are suggested in tropical climates. For HAZMAT ventilation, two vents installed high and two vents installed low is suggested. Customer's responsibility to ensure OSHA compliance when storing hazardous materials.
    Eliminate moisture and excess heat with our state-of-the-art computer-modeled design. Made with highly durable Polypropylene and Aluminum, the BigAir will never rust!
    The variables inside a shipping container are always changing. When the combination of those variables creates an environment prone to humidity, condensation will happen.
    The above-mentioned variables include, but are not limited to the following:
    ► Humidity
    ► Interior temperature
    ► Exterior temperature
    ► Wind direction
    ► Wind speed
    ► Foundation
    ► Adequate airflow under the container
    ► Direct sunlight to roof
    ► Direct sunlight to walls/doors
    ► Type of contents stored
    ► The volume of contents stored inside
    ► Color of container
    ► Specifically the roof
    ► Number of stock vents in the container
    NEW PRODUCTS:
    NEW BIGAIR VENT SIZES:
    (Amazon Canada): amzn.to/3wCAirk
    (Amazon USA): amzn.to/3AvmsZ7
    NEW STEEL STUD FRAMING KIT (2 CORNER CASTING COVERS + STEEL STUD BRACKETS + HARDWARE)
    2 Corner Casting Covers + 10 SS Brackets + Hardware (Amazon Canada): amzn.to/3EooAng
    2 Corner Casting Covers + 20 SS Brackets + Hardware (Amazon Canada): amzn.to/3Ve07rX
    2 Corner Casting Covers + 40 SS Brackets + Hardware (Amazon Canada): amzn.to/3Ve07rX
    2 Corner Casting Covers + 10 SS Brackets + Hardware (Amazon USA): amzn.to/3UHGyIx
    2 Corner Casting Covers + 20 SS Brackets + Hardware (Amazon USA): amzn.to/3Ve07rX
    2 Corner Casting Covers + 40 SS Brackets + Hardware (Amazon USA): amzn.to/3TIDbji
    𝐖𝐡𝐚𝐭 𝐓𝐨 𝐖𝐚𝐭𝐜𝐡 𝐍𝐞𝐱𝐭:
    -- Connecting Two Shipping Containers Together! Double Wide Home, Garage, Warehouse - DIY - NO WELDING: www.youtube.com/watch?v=COcoI...
    FOLLOW US ON OTHER CHANNELS 👇
    ➡️ Facebook: / thecontainer. .
    ➡️ Instagram: / the_contain. .
    ➡️ Merch Store: thecontainerguy.myspreadshop.ca/
    🛒 SHOP ON AMAZON
    || CANADA || USA ||
    Amazon USA: amzn.to/3hyzCiE
    NEW WINDOW FRAMING KITS
    NEW 42" x 30" Side Wall & 48" x 30" End Wall (Amazon Canada):
    amzn.to/3OxeeIm
    NEW 42" x 30" Side Wall & 48" x 30" End Wall (Amazon USA):
    amzn.to/479F54v
    (M S S ) Modular Strut Systems Products:
    **CSM Brackets (Amazon Canada): amzn.to/3TnGxct
    **CSM Brackets (Amazon USA): amzn.to/3TpgAJs
    **CSM Roof Bracket (Amazon Canada): amzn.to/3RgS77o
    **CSM Roof Bracket (Amazon USA): amzn.to/3CJYhJ8
    SECURITY
    Lock Box:
    **Bolt-On Lock Box (Amazon Canada): amzn.to/3AV1V1u
    **Bolt-On Lock Box (Amazon USA): amzn.to/40QCrNm
    Check out CMW's website: www.containermodificationworl...
    Check out TCG's website: www.tcg.ca
    **As an Amazon Associate, we earn from qualifying purchases.
    Hope you learned something :)
    #shippingcontainers #thecontainerguy #securing #transport
  • Jak na to + styl

Komentáře • 26

  • @USM247
    @USM247 Před rokem +4

    I like how you show how (and where) things should be installed. One can always refer back to these videos to be sure. Thanks.

  • @shawnahubbard4597
    @shawnahubbard4597 Před 7 měsíci

    I like that design with the additional mesh screening on the interior. That is basically what we added to existing vents on our home in Arizona. Our dryer vent for example, scorpions were getting in there, so we added the screen to the back and sealed it really well. The scorpions often follow crickets into areas like this, adding the mesh is really the best we can do from a structural standpoint. Good Job!

  • @robertroberts5218
    @robertroberts5218 Před rokem

    It is always great to have choices.

  • @AusJackal
    @AusJackal Před rokem

    Looks like a great product.. Sir, I wish you'd move your operation to here in Texas...

  • @thenativeamerican
    @thenativeamerican Před rokem

    Love this video. I have a question: Are these necessary if I'm insulating my container? I plan on steel stud framing, spray foaming, and greenboard drywalling my containers. If i do need to install it, do i frame around it?? Hope that question makes sense. Thanks!
    Additionally, do i need this if I'm installing a Big Air 400 CFM Fan??

  • @cyclicm1622
    @cyclicm1622 Před rokem +8

    Just so we are clear, here in the south the bug screen is MANDITORY! We have a huge amounts of small bugs, ants, termites, ect.

    • @TheContainerGuyTV
      @TheContainerGuyTV  Před rokem +4

      I hear that a lot. I didn't really understand until I was down there and paid attention. You are correct

  • @rockcrusher4636
    @rockcrusher4636 Před rokem +3

    I welded rebar up & down, then across to keep human critters out. Cheers.

    • @csehszlovakze
      @csehszlovakze Před rokem +1

      human critters lmao

    • @rockcrusher4636
      @rockcrusher4636 Před rokem +1

      @@csehszlovakze Hungary rocks, your leaders are giving it to the EU. Cheers.

  • @lifeonblossommountain7203

    I just bought 4 of the vents and overall am pleased with just about everything with them. However, the template is off and required modification. It’s too small by about 1/4”. This may have been caused by the duplication process. Often during the copying of an original, the copier reduces the image in order to not lose anything printed close to to an edge on the original. On subsequent runs if a copy is used, the image becomes smaller yet. As a former Xerox tech, this was not uncommon to see. Small issue, great product.

  • @thearmoniaband9189
    @thearmoniaband9189 Před 9 měsíci

    Just purchased some vents. Question, what size drill bit should be used to drill the holes for the rivets? Thanks!

  • @somecomment
    @somecomment Před 21 dnem

    How would you go about ventilating a shipping container being used as a garden room? Is having an AC enough?

  • @bradtomlinson1809
    @bradtomlinson1809 Před 3 dny

    I ordered the big 40s but did not get the bug vents. I ordered them with out by mistake. Are the bugs screens available separately?

  • @familyIdahoadventures
    @familyIdahoadventures Před rokem +1

    What about snow on the bottom Vent ? Would it hurt much to raise it up a bit?

  • @paullandry4031
    @paullandry4031 Před 8 měsíci +1

    If I understand correctly one model 45 on the rear end (top) and the other on the lower side of the 40 ‘ container.

    • @TheContainerGuyTV
      @TheContainerGuyTV  Před 8 měsíci

      Honestly, from what we've found, you can put two (with cross-flow) pretty much anywhere and they'll make a significant improvement.

    • @paullandry4031
      @paullandry4031 Před 8 měsíci

      Thank you !

  • @robvanza
    @robvanza Před rokem

    Never ever any stock on Amazon????

    • @TheContainerGuyTV
      @TheContainerGuyTV  Před rokem

      containermodificationworld.com/en-ca/collections/featured-products/products/container-modification-world-big-air-louvered-gable-vent-2-pack-for-preventing-condensation-and-excessive-heat-in-new-and-used-sea-cans-shipping-container-homes-cabins-and-offices

  • @robertthomas4329
    @robertthomas4329 Před měsícem

    So maybe I should not keep chocolate in the container.

  • @johndough1264
    @johndough1264 Před rokem +4

    To bad your products are so expensive