Shipping Container Shaping Bay [Part 6 Venting and Exhaust Fan]
Vložit
- čas přidán 22. 08. 2024
- Installing an exhaust fan and 2 vents to my shipping container shaping bay. Vents and fan were provided by Container Modification World - see links below. Be sure to subscribe to see more transformation videos as I turn it into my shaping bay!
Container Modification World Products Featured In This Video:
T10 Air Lift Exhaust Fan with Temperature and Humidity Controller
(Amazon Canada): amzn.to/3BtEeO9
(Amazon USA): amzn.to/3B34v4y
BigAir 45 Louvered Container Vents
(Amazon Canada): amzn.to/3wCAirk
(Amazon USA): amzn.to/3AvmsZ7
Shipping Container Videos:
1. Delivery and Relocation: • Shipping Container Sha...
2. Insulation: • Shipping Container Sha...
3. Sliding Door Entrance: • Shipping Container Sha...
4. Hanging Drywall: • Shipping Container Sha...
5. Mudding & Sanding Drywall: • Shipping Container Sha...
6. Exhaust Fan & Vents: • Shipping Container Sha...
7. Painting, Shaping Racks & Shelves • Shipping Container Sha...
8. Electrical & Lighting: • Shipping Container Sha...
9. Vacuum System & Final Touches: • Shipping Container Sha...
Website Merch: www.bendheimbo...
CZcams: / bendheimboards
Instagram: / bendheimboards
TikTok: / bendheim.boards
Facebook: / bendheimboards
All accounts: braid.network/...
🔥Ho Stevie! 10% OFF surf gear, wetsuits, fins, leashes and more! Use code: SHAPER10
hostevie.com
🔥Foam E-Z 10% OFF Surfboard Building Materials, tools and supplies! Use code: FEZTANNER10 (online store only, some exclusions apply)
foamez.com
🔥Eveon Containers $50 OFF Shipping Containers! Use code BENDHEIM50
www.eveonconta...
I love surfing, building with my hands and making videos. Bendheim Boards is my outlet to fuel these passions. I'm self-taught and am not an expert, but these videos show the process that works for me. Follow along for new videos every month!
![Shipping Container Shaping Bay [Part 7 Painting, Shaping Racks & Shelves]](http://i.ytimg.com/vi/3yNCHhcg92I/mqdefault.jpg)
![Shipping Container Shaping Bay [Part 7 Painting, Shaping Racks & Shelves]](/img/tr.png)
Something about the accomplishment and completion of physical labor in these videos is very calming to me. Great work! It's looking amazing.
Tip for the future. Next time that you want to cut into metal to install something like the fans, install butyl tape inbetween them. It last longer than caulk and is a lot better.
Other than that this is an amazing job!
TY for that tip!
Seen this container from the beginning have to say I'm impressed with your finish though I'm not surprised when your craftsmanship is so good on your boards, been a treat to seen the shop take shape and to see someone not cutting corners for once on here.
Love the production quality. Very engaging. Thanks for showcasing our products!
You bet, thanks for the great products!
@@BendheimBoards Ask for a question, it's very interesting how much did it cost to insulate this container
That's so insane, for some reason I'm so comfortable watching it, i can't wait to see how it will turn out, greetings from Indonesia
This container will last longer than 90% of the USA houses
No, it won't.
Ofc it will, because it‘s not made out of paper.
@@zackmorgan4500American home owner located
@@zackmorgan4500yes,yes it will.
Lol so would a cave! But I’d rather not live in a cave.
It'd be a sweet addition if you added an exterior dust collection system that's routed through the exterior shell of the container. Just sweep the foam beads into a corner where the collection would be located. Kinda like a built in vac system for a house.
It’s coming 👍
Throughout your level of perfection and attention to detail was something to behold. Much respect to you sir, I commend you 🙏🏽
Was getting soooo scared about the lack of ventilation, thank you!
This guy is his tough!🔥🔥🔥🔥I’m impressed
How come no "rain cover" or something like that at the top the air vents ?
You did seal it. Is that enough ?
Thinking that over time, the sun and rain/snow would destroy the sealing agent and then water would get inside.
I'm a gamer... what am I doing spending hours watching a man build his own personal man cave. I love this shit
Nice job overall, but you should consider opening that vent and paining the exposed metal you created while cutting. It will rust fairly quickly if you don’t
There's always one.... how do you know it's not stainless or aluminium?
Waiting for part 7
Ray, who are you? How talented you are
Saya senang liatnya...saya mengikuti proses pengerjaannya dari awal,good job brother 😎
Nice idea 💡
Ventilation done superb.
This project is awesome. There's a small mistake IMHO made around the 2:00 and 3:35 mark. When sealing vents for water penetration, I was always taught to leave the bottom edge unsealed. Water often will eventually get in regardless of sealing the top and sides, and best practice is to leave the bottom open so that the water can drain out / evaporate. By sealing all sides, the water is now trapped and you have water pooling / puddling / molding. I guess this may vary by product so if the install directions said to apply sealant around all four sides, then my bad.
As long as the caulk is in good condition no water should get in in the first place. Saying you should leave the bottom edge unsealed makes less sense than just re-caulking any leaking areas.
@@khalil7011 Water doesn’t generally flow up hill. And inspecting sealant / caulk frequently enough to catch a bad seal before any rain at all can get in is not going to happen, let’s be realistic.
Saya suka dengan creativitasnya mengurangi bajet membangun minimalis
Saran saya buat ide aupaya pantulan matahi tidak membuat udara di dalam panas
Amazing work dude simply incredible
Next time when using silicone, prepare some water mixed with liquid soap.
Dip your finger in the mixture and smooth the freshly applied silicone, silicone shouldn't stick to your finger.
at 2:11, what were those metal pieces that you used to cover the inside of the hole you cut, and also make the border around the outside?
Cool job man, got me hooked !
Bellissimo lavoro!! Ma.. come mai non hai messo una bella finestra, al posto degli aeratori?😅 Comunque bravissimo.. 🌹
Mate awesome work, if there were a need to heat it would you use a caravan diesel heater. Love your work we are learning from your experiences.
Continue making these awesome videos😊😊
Been following these container videos, great work! One question, are you not worried about bugs and spiders etc getting in? I would put some sort of mesh or screen in the vents somehow
nice work, can't wait to see the update 🤟🤟🤟
“If you're interested in 'balancing' work and pleasure, stop trying to balance them. Instead make your work more pleasurable.”
It will be good for a gaming setup😂
Fantastic bro 👍👍👍
Amazing
Hallo I'm from Indonesia
muy buenas ventilaciones
3:14 red eyes 👀💀
I was hoping someone else saw that
Waiting for the other parts
super intetresting projekt.
All in all would you begin again with a shipping container or do it somehow diferet?
Where did you buy the vents from? Can you send a link to me please
They are big air 40 vents from Container Modification world. Sold on Amazon.
WOW
Good idea. Jbu
Looks 👏
I'm confused...insulation up the ying yang...then you punched holes in the sides? Is it me or is there an issue? Wouldn't an exchanger be a better choice?
I wish I could afford just a fan for my container no insulation no air no electricity. I don’t even know where to start. Living in it has been a nightmare.
Hey do a Minecraft wood finishing for exterior
Bom dia! 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷❤❤❤
pq vc escreve bom dia em um vídeo que ta todo mundo falando em inglês?
Atualmente, Eu falo Portuguese
I’m currently working on a project that uses a shipping container as a housing for our air compressor unit. Currently with no exhaust fans the container gets up to 120F inside. Did this exhaust help a lot?
Why were the windows installed without foam, but the ventilation holes were sealed with foam?
Plss,. Next part..
Part 7 pleace😊😊
WOW😲$500 usd for fan ? Too costly for this poor fella ..
😊😊😊
The camera fell down cause it was all tuckered out after a long day xP
Why do electrical work after the drywall??
Should’ve cut before insulation
spooky pi 3:14
Very nice video. Want work with you 😊
You dont wanna use some Airfilters?
Part 7 brother
That's a $1,000.00 fan?!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Me puedes etiquetar en el video donde pintas el contenedor por favor.
Is it a Secret Gaming Room ?? 🤨
❤❤
How much did the whole project cost?
Next video part 7
Can somebody please tell me what kind of tool that is, starting around 1:28? Thanks!
What is the guitar riff? It's driving me mad
Heads up: PART 7 isn't in the playlist. 😉
👍👋👋👋👋
Drug lab - no doubt 🤭
💯👍🏼
So what r u turning it into?
A shaping bay… it’s in the title
But what's that?
@@scwfan08 yea idk either
Google exists my brother.
A shaping bay is a room dedicated for shaping surfboards
Looking for vents to do the same. Ridiculously overpriced
3:14 the f*ck is that? inside ?😮
Did anyone spot the red eyes or was i just trippin
В цинке жить нельзя!!!😮
We all paid for this guy to do this. Sad