Repairing a Shipping Container Roof Hole: DIY Guide by On-Site Storage Solutions

Discover how to fix roof holes in shipping containers with On-Site Storage Solutions! Whether you're using a container for storage, a workshop, or a living space, keeping it strong is important. We'll guide you through checking the damage, picking the right materials, and repairing. Don't let a few holes ruin your shipping container.
Stay tuned for expert tips and tricks, and be sure to like and subscribe for more valuable insights on container maintenance and repair!
#ShippingContainerRepair #OnSiteStorageSolutions #DIYGuide
For questions or inquiries, reach out to us at:
Facebook: onsitestoragesolutions
Instagram: onsitestoragesolutions
Website: onsitestorage....

[@davidmahle1221]

Thanks man! ... You are the only one I could find demonstrating the "POP" trick. THX YOU!!! .... FYI, I need a 40' container in Cedar Key Florida if you have any feedback on that. THX!

[@OnsiteStorageSolutions]

Appreciate it! Give us a call at 888-666-0520. We can get one for you. - Gregg

[@ForbiddTV]

I jacked mine in the middle as you show, never got a pop and it settles back down again. Did again with three jacks to about a 3" rise in the middle (still no pop), and when I removed the jacks it settled about flat. Any additional tips on how we can restore the gable?

[@OnsiteStorageSolutions]

The 3" rise is not enough. You will usually need to jack it at least 5" inches because it will snap back and settle at a little over 1". You sometimes have to do it multiple times to get the needed height.
Note: Be careful. The jack will be under a lot of pressure.
Good luck! let me know how it goes. - Gregg

[@ForbiddTV]

@@OnsiteStorageSolutions Yeah, been spending half the day doing this, you are right about the 5" even though it's scary. I also find I have to repeat on adjacent ribs to keep it from coming back down, usually one peak and one valley farther on either side of the low spot.