I used a cut 7/8" wrench to slide in and back up the spun cage nut. Use mirror and light and catch it by spinning 15mm bolt. Pain Ass! Then spray some metal protection film for corrosion.
So did you saw the top bushing, or the bottom? I’m in the middle of changing the right front one now and it’s stuck as hell. I was going to buy a big bit and drill it out, but I’ll try the sawsall first.
Warning to the wise sometimes they don't tell you when you get the bolts off the bushing that lower part might not come off that easy matter of fact had to take a grinder and cut the bottom piece off because I couldn't get it off and my dad did it I had a crowbar he had a crowbar we're actually ridden up a bearing puller and couldn't get it off on the way we did is grind the circle part so we can lift through the top it worked nobody tells you about that they just tell you that the bottom part of that bushing will come off easy wrong
2011-2016 front ones are even more difficult to access those front cage nuts! Great video
Should have went with S&B bushings way better than any other
Great video! I tried taking the front ones out and when the nuts spun, I said not today. I just need to take the time and get it done.
Great job!
Is there any reason you don't show your work? I like to see the wrenching.
I agree should have shown where you put the jack to lift it
I used a cut 7/8" wrench to slide in and back up the spun cage nut. Use mirror and light and catch it by spinning 15mm bolt. Pain Ass! Then spray some metal protection film for corrosion.
What if you weld the nut in?
Thanks
Nice!
So did you saw the top bushing, or the bottom? I’m in the middle of changing the right front one now and it’s stuck as hell. I was going to buy a big bit and drill it out, but I’ll try the sawsall first.
Warning to the wise sometimes they don't tell you when you get the bolts off the bushing that lower part might not come off that easy matter of fact had to take a grinder and cut the bottom piece off because I couldn't get it off and my dad did it I had a crowbar he had a crowbar we're actually ridden up a bearing puller and couldn't get it off on the way we did is grind the circle part so we can lift through the top it worked nobody tells you about that they just tell you that the bottom part of that bushing will come off easy wrong
Leather Albdation how much is it model 2010
induction bolt buster
I’ve been soaking mine for three months. I hit it every week needless to say it didn’t help