You made the classical mistake made by many....You tightened up (captured) the lower control arm bushings at full droop instead of normal ride height..I see guys doing this all the time when installing rear leafs also.. Nice video and agree with the "'use a quality spring compressor"....Thanks :)
Raptors are designed for off road use. It becomes leveled when you add your rack, spare tires, heavy duty Jack, tools, etc. after adding a couple hundred pounds to the back, it becomes leveled-magic! If you add a leveling kit, it becomes dangerous when going at high speeds over whoops.
2018 Raptor. I installed my 1.5" perch kit and greased the top so the blue collar pops over it like in the video and silicone greased it then even did a bit of hard terrain off roading BUT THE BLUE COLLAR WILL NOT FULLY SIT ONTO THE PERCH KIT. About a quarter inch left for it to be compressed onto??.. both sides all the way around a about a quarter inch. Stopped by a suspension shop they think it’s a defective product because why else would both sides sit the exact same way after being fully mounted on the strut same as the video? Two guys, 3 hours of hard work wasted. Will be contacting website again for refund.
And the 3rd reason is so when you tow or haul stuff in the bed, the weight makes it level out rather than squatting, which is bad for handling, braking and head light projection.
Is there an advantage to compressing the spring and adding the collar below the spring? Versus not having to compress the spring by adding a shim to the top of the strut?
Seems like the shock tower shim is much simpler to install. Too bad the new Raptor doesn't have the built-in 3 adjustment heights that the old one did.
You made the classical mistake made by many....You tightened up (captured) the lower control arm bushings at full droop instead of normal ride height..I see guys doing this all the time when installing rear leafs also..
Nice video and agree with the "'use a quality spring compressor"....Thanks :)
Thanks for watching!
Raptors are designed for off road use. It becomes leveled when you add your rack, spare tires, heavy duty Jack, tools, etc. after adding a couple hundred pounds to the back, it becomes leveled-magic! If you add a leveling kit, it becomes dangerous when going at high speeds over whoops.
do u have something for Kia Carnival, looking for a 1 or 2" lift?
2018 Raptor. I installed my 1.5" perch kit and greased the top so the blue collar pops over it like in the video and silicone greased it then even did a bit of hard terrain off roading BUT THE BLUE COLLAR WILL NOT FULLY SIT ONTO THE PERCH KIT. About a quarter inch left for it to be compressed onto??.. both sides all the way around a about a quarter inch. Stopped by a suspension shop they think it’s a defective product because why else would both sides sit the exact same way after being fully mounted on the strut same as the video? Two guys, 3 hours of hard work wasted. Will be contacting website again for refund.
Looks good
Thank you!
Why is any truck not level to begin with.
And the 3rd reason is so when you tow or haul stuff in the bed, the weight makes it level out rather than squatting, which is bad for handling, braking and head light projection.
Can you do a video of the bump stop kit..
How much does this effect ride quality? Coil spring spacers and mods like this have turned some previous vehicles from a good ride into a tractor.
It still rides great!
What lift is on the raptor from the factory?
It comes from the factory with Fox Suspension, but it isnt really "lifted" from the factory.
Is there an advantage to compressing the spring and adding the collar below the spring? Versus not having to compress the spring by adding a shim to the top of the strut?
Theyre both going to achieve the same result. The collar is the less expensive option.
Seems like the shock tower shim is much simpler to install. Too bad the new Raptor doesn't have the built-in 3 adjustment heights that the old one did.
Do you have any issues with steering rattle over bumps after installing this leveling kit?
Nope, you not have tightened something properly if you are experience rattling.
What brand is that strut compressor?
This is the exact one we have amzn.to/2r15nob
Freddy CJPP thanks!