Lamonster Approved Phone Mount.. Holder.. for the CanAm Spyder. Is it a Bust or is it the Bomb!!!
Vložit
- čas přidán 21. 07. 2020
- I have been asked by several subscribers as to how I feel about the Lamonster Approved Phone Mount/holder. Today I will be having an in depth look and discussion about it. Grab a cup of coffee and see if this is the phone mount for you.
www.lamonstergarage.com/lamons...
The following description is from the Lamonster Web Site:
Lamonster Approved Phone Holder with 1" Ram Ball Mount
As od this posting MSRP $33.95
This is a very solid mount compared to others on the market. It comes with a 1" ram ball on it so it will directly replace an X-Grip.
This is perfect setup for those of you that already have one of our setups with X-Grip and are looking for a more solid mount for your phone.
Material: Aluminum alloy
Width: 55mm (2 3/16") can be adjusted 100mm (3 1/2")
Phone holder has six claws to hold your phone securely in mount.
Included in this kit: 1 Lamonster Approved Phone Holder with a 1"Ram Ball on it.
Instagram CoachBob3
/ coachbob3
Facebook Coachbob3
/ 325314891475399
Twitter CoachBob3 @Bob3Coach
/ bob3coach
Coach Bob’s Current Motorcycles
2015 Triumph Speed Triple
www.triumphmotorcycles.com/
2019 CanAm Spyder RT
can-am.brp.com/on-road/us/en/
Coach Bob’s Gear
Shoei GT-Air Helmet
www.revzilla.com/shoei-gt-air...
Shoei J-Cruise Helmet
www.revzilla.com/motorcycle/s...
Cardo Pack Talk Bold
www.revzilla.com/motorcycle/c...
Joe Rocket Phoenix Ion Jacket
www.revzilla.com/motorcycle/j...
Icon Overlord Glove
www.revzilla.com/motorcycle/i...
Cortech Scarab 2.0 Gloves
www.revzilla.com/motorcycle/c...
Alpinestars SMX-2 Air Carbon V2 Gloves
www.revzilla.com/motorcycle/a...
Bilt Grid Mesh Jacket
www.cyclegear.com/gear/bilt-g...
Street and Steel Riding Jeans
www.cyclegear.com/gear/street...
Alpinestars SMX-1R Vented Boot
www.revzilla.com/motorcycle/a...
Seat Cushion
www.buttbuffer.com/product/pe...
CoachBob3 Audio/Video Equipment
GoPro Hero7 Black
gopro.com/en/us/shop/cameras/...
MXL 990-HE Condenser Microphone
www.mxlmics.com/microphones/st...
#cb3 #coachbob #coachvic - Zábava
We LOVE our LaMonster phone holder with USB charger. It's awesome!
Two problems with these mounts for pixel3 xl at least
1. The back plate can block the the touch plate used to open the phone on the back of the phone
2. The buttons are on the right side, both power and volumes.
I use the quadlock mount on a ramball. It's clean, rock solid and I have access to the touch plate and the buttons. Much better for me.
I have the same mount on my Spyder and it has never failed me. I used to but now, I don't even use a lanyard to secure it. That is how confident I am about this mount.
It really is a solid piece...I find myself traveling around town and forgetting the lanyard as well. so far..so good.
You could also use one of there rubber tether like the RAM Mounts Tether for X-Grip Holders instead of a lace to secure the phone to the stand. It cost only a few box and it works great. There sure is a variety of these on Internet but the RAM would certainly fit your stand.
Hello coach Bob great video! A great drink holder solution will be go on Amazon and get one like coach Vic without the clamp buy a longer screw and screw it in the back directly into your spyder cuff on the backside of your phone holder works like a charm.
Hay Coach Bob, Great job on the Spyder accessories. Being an old Triumph rider (TR6),would you do a video on the company today as well as the past?
I recently had a code that indicated that my spyder was unable to read my key …hence it would not start. I had to do a google search that stated numerous descriptions of how I needed to replace the unit in which the key is inverted. After Wading through all sorts of suggestions I finally came across one post that said my GPS or phone might have been sending a signal that was confusing bike computer . I removed my phone from its’ perch and wala … it started right up.
Great video, Coach Bob. What do you do when it rains on your phone? I have seen a mountable, waterproof case on Revzilla. I have a 2018 RT and use Sygic Navigation through the electronic dash. Rain is not an issue with it.
I hook the phone to the BRP app in the frunk. Very inconvenient...but, it has worked so far.
Coach great video. What is the base mount around the Handlebar? I just bought a 2020 rt and that looks perfect.
Paul Meola it is the spider cuff by Lamonster. It’s a nice piece. Beautifully machined. Here is my install of the piece.
czcams.com/video/wwe7BLwfWG4/video.html
New to a spider ,, looking for a cup holder ,any suggestions , thank yu ..
Coach Bob 3.................................."Super Genius" Great hack on making a Safety Lanyard.
What year is your bike and where do you mount the cell phone holder ?
Where did you get the bracket that is holding the cup and Ram holder?
I bought it trough Lamonster.. Here is a link to his website.
www.lamonstergarage.com
They're great to do business with.
@@CoachBob3 thank you!
Sorry to have to say this. My 2020 Spyder F3-T Limited with 1300 miles on it has a problem. I've been taking it easy to break it in. I got out on a highway getting up to 70 mph and got a bad vibration. Looked it up on the internet and found out it's a common problem. They say it's because the belt is so long. Can-Am even makes a idler for it. I'm very unhappy they know it's a problem and charge for the fix. Your thoughts?
Greg Ferris Sorry to hear this... I would take it to the dealer and ask them to make it right. I’d also call corporate and make sure they were in in the loop.
If that doesn’t work... I’d install the tension idler.
If they refuse to make this right ...I think it’s totally BULLCRAP 💩
Please keep me updated. I’d love to share your findings with the world. Good or bad. People need to know. I am truly sorry to hear about this.
CB3
@@CoachBob3 Well I just got off the phone with Buck's Motorsports in Akron New York where I purchased my Spyder. They actually carry the belt tensioner and know it's a problem and don't cover the cost of it or the labor to put it on. I told them if BRP knows it's a problem it should be covered under warranty. I was pretty much told that doesn't happen to all of them so it's not covered even though they know it's a problem and make a part that fixes it. So I'm going to have him do it when I take it in for my service I'll bite the bullet to make sure that it's right. Buy the way I rarely go above 60 mph.
Greg Ferris I will be making a video about this in the near future. I am also going to reach out
to BRP and ask for an official statement to share with subscribers. BRP should send the part for free and the dealership install it for free. The machine simply does not do what it’s designed to do. They are wrong!
@gregferris please send an email with your phone number.
bob3coach@gmail.com
I’ll call you. I just got off the phone with BRP Corporate
@@CoachBob3 Greg here. I removed my email and phone number from this conversation because you have my Gmail and phone number.