The Dude Had The Car Running And A Door Chime Going Off. So, The First Minutes Of The Video We Couldn't Understand What The Heck He Was Saying? Maybe Proof Reading Video Before Uploading Is The Answer? Most Of The Time You Guy's Do Great Videos.
2001 S70 DOES NOT HAVE THE ON SWITCH ON THE DASH BELOW THE HEADLIGHT SWITCH, AS SEEN ON THE VIDEO. iS THERE ANOTHER LOCATION TO ACTIVATE A DASH BOARD CODE READOUT? i PLUGGED IN MY OBDII READER AND GOT A "FAULT" AND NO CODES
I saw this somewhere that some cars don't have the fog light button to press. My 2001 V70 XC keeps kicking out Catalytic insufficiency bank #1 code I think p0422 or p0244 (sorry I'm dyslexic) with a code scanner I use that doesn't help me much. Other systems this can be the purge valve, but I don't think it is in Volvo's diagnosis playbook. Is this a simple cause to trace and fix or not? Thanks for sharing this tid bit about Volvo though, it should really help many people even now since so many of these vehicles have remained on the road. It seems like they really had some growing pains but anyone that gets one now might get one with the major problems fixed and just little wear and tear buggers to keep chasing. And these should be chased!
Love your videos here... Always well presented , and very well explained. I have a 2003 S60 manual shift (Ireland ) The brake low level indicator is staying on a lot, but when braking goes off from time to time.. A yellow triangle also appears, along with the text warning about the low level...Level is good..in fact I may have over filled it.. Any ideas?
+Kaleb King You may want to remove the door panel and take a look inside of the door to see if the cable has come loose. You may also want to check the window motor to see if it needs to be replaced.
The door module needs to be reprogrammed, pull the fuse of the appropriate door module during a raising the glass operation, turn of ignition, return the fuse to it holder, raise and hold the switch till it is closed, turn off ignition, turn back on, programming complete, done.
So my car has a light on about the passenger air bag being on I boughta Reader it read the car a knew the vn number but then said was no error codes but the lights still on. The Reader also said it doesn't have any stored codes can you help me figure out how to get the light off
Sadly this has limited utility. Volvo could have actually displayed the codes in each module. but no... This presentation is odd - why are all these modules having a trouble code set, and I can't see the Check Engine light on.
My 2006 XC90 did this. The ignition was not all the way to the 0 position (but somehow I was still able to get my key out) so the car thought the key was still in the car. Volvo's feature of helping you not lock your keys in your car kept popping the lock back up.
Disappointing video. Does not in fact tell you how to pull codes (you still need a scan tool for that) - just tells you that you have fault codes (although it does tell you in what area. The initial instruction are impossible to hear. Thanks to those who explain it below.
Thanks for the videos. Hope you can help. 2001 S80. Engine light stays on, code reader at Valvoline oil change did not show any error codes. Where do I start if I find nothing going through your procedure? Thanks again
im trying to find a way to get a fuse out of the yellow box under the hood of my s40 Volvo and I haven't seen anything yet on video about how to do that
srs warning stopping on have purchased a scanner and its showing no codes cost 40 quid any help please scanner is ancet obd11 eob any help in solving thanks
+robert downing Thank you for checking us out. This could be a intermittent issue with an air bag sensor or other internal component. There should be a procedure available through an online forum showing how to obtain the reason for this SRS light appearing. 1aauto.com
We currently do not have an auto repair video with this particular repair. We'll keep this request in mind in the event that we need to make this repair in the future. 1aauto.com
+chilangoguapo32 - This is a VERY common problem with these cars. I'm have having the same trouble and would love to see a tutorial for the V70. I've heard it could just be the yaw sensor or ??
You may want to check the vacuum lines in the engine compartment to see if there's a vacuum leak. If there's a cracked or broken line you may want to fix or replace it. Hope this helps you out. 1auto.com 866-403-3393
+Terence Brigstock We currently do not have an auto repair video that covers this particular repair. We will keep this request in mind in the event that we need to make this repair in the future. 1aauto.com
the main reasons I found are either dirt or sweat on bulb - I was having this problem repeatedly and it has never happened again since i started using gloves to change bulb - never handle the bulb
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
This video is 5 years old now but my Volvo is 15....useful info thanks for posting this vid!
+Jeffrey E. Klein Thanks for checking us out. 1aauto.com
Turn on closed captions, audio does sound muffled. Helpful video thanks!
Too bad you can't hear the initial instructions on how to access the display.
The Dude Had The Car Running And A Door Chime Going Off.
So,
The First Minutes Of The Video We Couldn't Understand What The Heck He Was Saying?
Maybe Proof Reading Video Before Uploading Is The Answer?
Most Of The Time You Guy's Do Great Videos.
+wwvette Thanks for the tip! We'll pass this info along to our production team.
Can't hear the initial instructions on how to get into that hidden menu... press the read message on the stick, and hold the light button???
Barb Grajewski press and hold the read button and tap the rear fog lights button twice
why is this guy doing subliminal messaging for the main instructions in the video, help me!
But what does "SET" mean? Does it mean yes, there is a standing fault or issue with a particular module?
Diagnostic Trouble Code Set = fault
2001 S70 DOES NOT HAVE THE ON SWITCH ON THE DASH BELOW THE HEADLIGHT SWITCH, AS SEEN ON THE VIDEO. iS THERE ANOTHER LOCATION TO ACTIVATE A DASH BOARD CODE READOUT? i PLUGGED IN MY OBDII READER AND GOT A "FAULT" AND NO CODES
When the display shows checking if you wait will it eventually respond? As I did a test and was waiting a few minutes and it keep displaying checking.
Same result: checking…
Nothing happens ?
@@mikef6706 Could be wrong, but I think some functions need the engine running to check the module properly.
good video, but more emphasis should have been on the read button and Holding it in while pressing the other button.
I saw this somewhere that some cars don't have the fog light button to press. My 2001 V70 XC keeps kicking out Catalytic insufficiency bank #1 code I think p0422 or p0244 (sorry I'm dyslexic) with a code scanner I use that doesn't help me much. Other systems this can be the purge valve, but I don't think it is in Volvo's diagnosis playbook. Is this a simple cause to trace and fix or not?
Thanks for sharing this tid bit about Volvo though, it should really help many people even now since so many of these vehicles have remained on the road. It seems like they really had some growing pains but anyone that gets one now might get one with the major problems fixed and just little wear and tear buggers to keep chasing. And these should be chased!
Love your videos here... Always well presented , and very well explained.
I have a 2003 S60 manual shift (Ireland ) The brake low level indicator is staying on a lot, but when braking goes off from time to time.. A yellow triangle also appears, along with the text warning about the low level...Level is good..in fact I may have over filled it.. Any ideas?
I am having that problem you mentioned with the window coming immediately back down after using auto up. Any advice on how to fix this issue?
+Kaleb King You may want to remove the door panel and take a look inside of the door to see if the cable has come loose. You may also want to check the window motor to see if it needs to be replaced.
The door module needs to be reprogrammed, pull the fuse of the appropriate door module during a raising the glass operation, turn of ignition, return the fuse to it holder, raise and hold the switch till it is closed, turn off ignition, turn back on, programming complete, done.
Press reset and hold and press fog light ?
nice..i have that on my youtube channel too..i wish i have volvo diagnostic scan tool so i can reset it. can the dealer reset it ??
Thanks for tuning in. Yes a dealer will be able to reset the light for you.
1aauto.com 888-844-3393
So my car has a light on about the passenger air bag being on I boughta Reader it read the car a knew the vn number but then said was no error codes but the lights still on. The Reader also said it doesn't have any stored codes can you help me figure out how to get the light off
Some say checking but nothing changes. What does this mean?
Doesn’t work on 2007 xc90
My awd system doesn't work. This manu says DEM DTC SET. What does that mean?
Sadly this has limited utility. Volvo could have actually displayed the codes in each module. but no... This presentation is odd - why are all these modules having a trouble code set, and I can't see the Check Engine light on.
Alright cool. I always wondered how that works. Thanks : )
Thanks for watching!
1aauto.com 888-844-3393
Drivers door lock pops back up on it own after I lock my car externally (XC90 2003) any ideas please?
My 2006 XC90 did this. The ignition was not all the way to the 0 position (but somehow I was still able to get my key out) so the car thought the key was still in the car. Volvo's feature of helping you not lock your keys in your car kept popping the lock back up.
Thank you!
+Kenneth Howell Thanks for watching. Hope this video helps you out. 1aauto.com
thenk you
I cant hear the most important part.... the how to...part of this video...
Would be helpful if I could hear the commentary
no codes or code #'s. I already throwing a code need to see the code#
Disappointing video. Does not in fact tell you how to pull codes (you still need a scan tool for that) - just tells you that you have fault codes (although it does tell you in what area. The initial instruction are impossible to hear. Thanks to those who explain it below.
Thanks for the videos. Hope you can help. 2001 S80. Engine light stays on, code reader at Valvoline oil change did not show any error codes. Where do I start if I find nothing going through your procedure? Thanks again
Ray Bohn is look if a code comes up for the gauge cluster, like one in the little menus thing of the video and then see again on an obd reader
im trying to find a way to get a fuse out of the yellow box under the hood of my s40 Volvo and I haven't seen anything yet on video about how to do that
Useless. Cant hear a thing
turn on closed captions CC
+AyeAye-Adri Rodriguez Thanks for the tip! We'll pass this info along to our production team.
just ran the check
ECM DTC SET
AUM DTC SET
CEM DTC SET
CEM DTC SET
PDM DTC SET
VEM DTC SET
i need help :(
So if it says DTC SET that means those modules have codes ?
please tell me how to change from belgium to english language (on dash board)
+Akram Helal The owner's manual might explain this to you.
What would "DEM not checked" indicate?
Cant hear you at start of video to know what to do 👎
my Volvo 03 S60 series turns over but will not start I need help
Beep,beep,beep...got it!
srs warning stopping on have purchased a scanner and its showing no codes cost 40 quid any help please scanner is ancet obd11 eob any help in solving thanks
+robert downing Thank you for checking us out. This could be a intermittent issue with an air bag sensor or other internal component. There should be a procedure available through an online forum showing how to obtain the reason for this SRS light appearing. 1aauto.com
What if this diagnostic says "ecm not checked?" my problem, and car cannot start, cannot give the fuel to engine
+Algis Bernatovics That may be something to have a local mechanic check out to ensure that there is not another issue going on in your vehicle.
How can reset the antiskid service requiered ?
We currently do not have an auto repair video with this particular repair. We'll keep this request in mind in the event that we need to make this repair in the future. 1aauto.com
+chilangoguapo32 - This is a VERY common problem with these cars. I'm have having the same trouble and would love to see a tutorial for the V70. I've heard it could just be the yaw sensor or ??
+1A Auto Parts anything on this yet?
Can bad battery make my 2004 Volvo go crazy
Being that I have a 2004 V70 and have had a ton of electrical problems after installing new battery I am gonna say YES !
Same😭😭
Is this an asmr? I can't hear the voice over the engine and door chime >:(
+Volvo Cars Thanks for the tip! We'll pass this info along to our production team.
2004 S60- rough idle, check engine light on, but code scanner says "no codes".
Now what?
You may want to check the vacuum lines in the engine compartment to see if there's a vacuum leak. If there's a cracked or broken line you may want to fix or replace it. Hope this helps you out. 1auto.com 866-403-3393
what do each of the messages mean? as in the 3 letter before the "ready" "set" and "checking" bits. thanks:)
Right. Also, Need to know what they should read, set, checking...)
The video explains that.
Bad sound. Can hardly hear
How do I reset the engine system service required on my xc90 2007 cheers
+Terence Brigstock We currently do not have an auto repair video that covers this particular repair. We will keep this request in mind in the event that we need to make this repair in the future. 1aauto.com
I disconnected the battery then reconnected and message disappeared.
Can't hear you
+James Carter Thanks for the tip! We'll pass this info along to our production team.
No help
sorry car is s60 2005
satan likes this video
This does not work for my 2001 c70
+Dorene Suter Thank you for watching. We're sorry to hear this did not work on your 2001 C70. This will work on most Volvo models. 1aauto.com
Same on my 2004 C70.
why do my headlight bulbs. keep burning out
the main reasons I found are either dirt or sweat on bulb - I was having this problem repeatedly and it has never happened again since i started using gloves to change bulb - never handle the bulb
Can't hear a think he's saying. Find your voice dude!
FFS useless!
Audio terrible!!@
+Meowstro Luciano Pavorcatti