Replacing The Flex Disc On Mercedes Benz W202 C180

Sdílet
Vložit
  • čas přidán 26. 05. 2020
  • Replacing the bad flex disc on mercedes benz w202 c180. While driving the car I noticed that when releasing the clutch there was a clunk under the car so I went to diagnose the problem. Old flex disc was worn out and had a lot of free play so we managed to replace it and fix the clunk. This kind of system also comes in w124, w210 and others.
    Latest news are announced on our instagram page - / garagify
    Instrumental produced by Chuki. Check out his channel: / chukimusic
  • Auta a dopravní prostředky

Komentáře • 8

  • @keepsmiling4494
    @keepsmiling4494 Před 3 lety +3

    Danke für das tolle Video. Ist das gleiche wie beim 190 E 2.0.
    Kleiner Tip, schnell die vordere Auspuff-Aufhängung abschrauben (4 Schrauben), dann kommt die Welle weiter runter und man die Scheibe ganz leicht entnehmen.
    Die Welle kann man mit einem montierhebel etwas nach hinten drücken.
    Die Getriebeaufhängung kann tatsächlich dran bleiben.

  • @petervendegh3300
    @petervendegh3300 Před 2 lety +1

    Danke meister.Köszönöm a feltöltést mester.👍

  • @sourcey6620
    @sourcey6620 Před 6 měsíci

    Miya heee miya hoooo miya ha ha 😊

  • @fernandogonzalezruiz6199

    hello I have a mercedes 180c w202 if I accelerate a lot, it will bump a bit when driving, it is no longer gears well, it is the hardy disck thanks greetings fernando Sout spain

  • @joesaric1
    @joesaric1 Před 2 lety

    is this play in the middle universal joint okay?

  • @randomus5450
    @randomus5450 Před 3 lety

    could it be that flex disk causing vibration from 10 to 15-20mph on a w202 ?

    • @garagify4255
      @garagify4255  Před 3 lety

      Could be plenty of things! To be sure you need to inspect the car!

    • @joesaric1
      @joesaric1 Před rokem

      this is due to vibration absorber in front of the flex disc !