Jason NNBS ahh nice I got a 2013 Silverado with a third car delete and muffler delete to bullet, but I’m really contemplating on headers I wanna be louder
i just seen this video 2 years later but can you just tell me what exactly you did on it and what you told the muffler shop to do it on it pls and thank you
did you have to do any tuning to prevent it from going into limp home mode? cause i have same truck and plenty of people told me to get front o2’s tuned out
i doubt you’ll get sate reffed in a truck depending where you live, my single cab had long tube headers, fully straight piped, full tint all around even windshield was 5% and i didn’t get pulled over once🤷🏽♂️ but it’s all up to you, i’m about to get another pair soon for my 2012 crew cab
@@jasonnnbs i have a 4.8 2012 1500 crew cab so far i put a K&N intake and outlaw exhaust idk if i should put headers or not 😂 has an aggressive sound to it but i want aggressive loud!
JORGE SALAZAR first muffler i got was a magnaflow then 1 year later i got a carven R and since then I’ve been rocking the carven. Debating on getting a magnaflow again but the bullet muffer
Late comment but do the duel tips make it louder than a standard straight pipe or is it only for appearance
This is Kyle from the Groups NNBS 👍🏻
This Silverado sounds really good.
Kevin Thomas thank you sir💪🏽
What kind of drop did your homie had with the 4.8? Love the truck btw 👍
4/7 I believe bro and thank you sir👍🏽
Where did you get the hd hood bro ?
What gears did you go with
I can't wait
Where is the muffler shop located
I need to I stall my headers and how much they charge you? By the way you truck sounds great
Ruben Salais thank you 💪🏽 and its in Pasadena on jackson next to a audio shop and they charged me 250 the guy knows me and i bring him people
@@jasonnnbs can I mention you if I take my truck there?
Yessir😼
Hell yeah
He spending money on upgrades rather than his front bumper dent lol
Sleeper look 🤣
It shakes ? It must be cold throw your blanket over it and try agin
Okay 👀🔥🔥
Yessir🥶
Did any of the bolts break? I want to change mine by myself but I’m scared of the bolts breaking so I’m debating if I should take it to a shop
Yes, its better to take it to a muffler shop
Nice asf !!! What kind of exhaust do you have on it ?
I had the carven but i switched to a magnaflow bullet
@@jasonnnbs which one is on rn? It sounds badd🔥
Kooks bullet muffler bro! Sounds good asf
Did you change your heads and valve springs and lifters and rocker arms.
No
Ok correct me here. You have 1&3/4 pacesetter into 3” catless mid into a 14” long by 4” round magnaflow? Just trying to do something similar.
I got 1& 7/8 , no cats and 3 inch all around. Now i have the magnaflow bullet
How long is the bullet? 6”?
Yes I believe so
You tuned it after? If so around how much was it? Thinking of getting some headers but want to know around how much it'll cost me
250 for a street tune bro. Depending on where
You go get ready to spend around 700$
Can you use the super chips scanner for this vehicle to tune it?
You can buy i personally don’t trust em. Custom tune for me is the way to go
So on the 5.3 does it have cats right after the manifold or are those just for the 02 sensor
After the manifold
You welded the long tube to oem y pipe or you changed out the Y pipe?
Custom y pipe
Hey man what tips are you using I’ve been wanting some dual tips
5 inch dual bro. Any muffler shop should have em
What was your previous set up before the headers? And did you get a tune after install?
Has a magnaflow then went to a carven R then went to a magnaflow bullet
Yessir
Jason NNBS ahh nice I got a 2013 Silverado with a third car delete and muffler delete to bullet, but I’m really contemplating on headers I wanna be louder
You’ll immediately notice the difference once you slap them on bro
What kind of exhaust did the first guy in the video put on his truck?
Corsa sport I believe
i just seen this video 2 years later but can you just tell me what exactly you did on it and what you told the muffler shop to do it on it pls and thank you
Speed engineering headers and 3’inch all the way out. Back then i believe i had a Carven R muffler
Your cats maybe stopped up because my boss just had to change his due to the same issue
did you have to do any tuning to prevent it from going into limp home mode? cause i have same truck and plenty of people told me to get front o2’s tuned out
My truck never went into limp Mode. It would just have a rough start then it’ll level itself out. Tuner deleted the check engine light.
@@jasonnnbs what does limp mode mean?
Truck not moving under its own power
What kind of longtube headers are those?
Speed engineering 1 and 7/8s long tube headers
Bro im thinking about adding long tubes on my 4.8 but im in cali and worried about state refs and shit 🤦♂️
i doubt you’ll get sate reffed in a truck depending where you live, my single cab had long tube headers, fully straight piped, full tint all around even windshield was 5% and i didn’t get pulled over once🤷🏽♂️ but it’s all up to you, i’m about to get another pair soon for my 2012 crew cab
and i’m from the bay area
@@BenDover-vp9eg i stay in La took off the 3rd cat and sheesh
I got a 4.8 Silverado too, do you need a tune after you install headers?
Yes you do
@@jasonnnbs thanks for the reply usually get no answer
No problem. Better get a tune as soon as you can bro. Its gonna run super rich
@@jasonnnbs for sure ready to see what it does
Its gonna waist hella gas depending what rear gears you have bro so I recommend looking into getting your dif built with gears aswell
Did they by pass your sensors or they did something different
Bypassed the sensors
What kind of headers you got installed Need my 07 sounding like that
Speed engineering 1 and 7/8s long tune headers.
Jason NNBS 👌
@@je820rry7 right now I'm running a magna flow bullet muffler. sounds way better then the obnoxious carven
What lowering kit you got I need those I got the same wheels
Mark Tanteo its just dropped 3 inches front the back bro
How’s the ride after dropping the 3” in the back?
Rides pretty good tbh but im going to a 5/7 drop
5.3’s may not be the fastest or the most hp but they have to get the best sounding.
My opinion is that people hype up the 5.3 so much that they forget that the 4.8s have balls too
@@jasonnnbs how about 6.2?
Farid Gadimov I’ve heard 6.2 with a full exhaust and they sound mean as well. Currently debating on a 6.0 or 6.2
@@jasonnnbs i have a 4.8 2012 1500 crew cab so far i put a K&N intake and outlaw exhaust idk if i should put headers or not 😂 has an aggressive sound to it but i want aggressive loud!
Get long tubes and slap on a Magnaflow bullet muffler
What brand headers, any fitment issues?
Speed engineering. Had em for about 3/4 years now and absolutely no issues
Where did you get the hood did you have to change the grill and bumper
Drew Hebert hood and grill i got it off a part out. Hood and grill are simple bolt ons
Could you possibly get the shops address ? Can’t seem to find it
It’s called evolution muffler
Did u have to put thread locker on bolts or they’ll be fine like that.??
They should be fine bro
What long tube headers you get ?
Speed engineering
What all done to truck performance wise and what yours exhaust set up
As of this moment. Headers , cai, built trans with a bigger stall (currently hurt lolz) built dif with 4.11s
What exhaust did u have on it before u installed the headers ??
Carven R muffler, as soon as i installed the headers it was wayyyy too loud
Did your steering shaft rub on header
No sir
What exhaust did you have when it was stock?
JORGE SALAZAR first muffler i got was a magnaflow then 1 year later i got a carven R and since then I’ve been rocking the carven. Debating on getting a magnaflow again but the bullet muffer
How much did you pay for the headers?
220$ bro
What brand headers ??
where you get the hd hood moldings ??
Part out lol 50$
What year 2500 did you get hood off of
What muffler did you run on this truck
Carven R
What size headers ?
1 and 7/8s
Do you have problem whit the sensor ?
No problems
What type of headers were they
I had pacesetter
What muffler did the blue truck had
Pacheco Kevin corsa sport
4.8 right? Sounds nice.
Also was switching the gauge cluster plug and play? Or how did you do it?
Thank you sir🙏🏽 and yessir basically
Ceeeeehh!!!
What exhaust is that truck running? @ 6:00
Corsa sport
Bet you its clogged Cats on the Ford giving you trouble
And that was the problem lol
Jason NNBS if the cats on the ford where acting up the one thing bout the cats of there are clogged just floor it it it will blow it out
Can I use these without the y pipe? On my 08 Silverado 1500 4wd
As open headers?
Ima put the headers on myself and go to the muffler shop and let them finish the rest
Yeah but its gonna be a custom Y pipe
Ima just run straight pipe no y pipe no none
Yeah that’s a no no lol. Youre gonna get annoyed
What did the blue truck haved
Gerardo Escobedo headers tune intake. Same setup as me
What's the whoel entire setup up
Long tube headers and what els
I had the carven R but i switched to a kooks bullet
Link to headers please?
Speed engineerings website bro but i believe they’re on back order bro but you can check
Say brother what's the address for your boy I live near h-town
I want to go show your boy some love for my chevy sevordo
Why do they all have dents?
The headers?
What’s the drop on the 4.8 truck?
Just a 3 inch drop bro in the rear
Get some spark plugs you throwing blue smoke
Gonna change em this month. Dont drive the truck around as much anymore.
Your oil cap is missing 🤦🏻♂️
Its there wym lmao
4.8 🤭
What's wrong with the 4.8 ?
@@triggas80 almost v6 🤭
They handle boost better. Also rev higher in the top end. Youd be surprised what you could do with a 4.8 tbh.
I still gap 4.3s and 5.3s bubba😗
Love surprising people with this 4.8🥴
$220 for headers lol good luck
Speed engineering 🥱
Get a tune by khp lol street tune
Not gonna lie KHP is getting good at tuning but I’m not fully convinced yet
Jason NNBS they do good I got a tune by them
So how does this pass Inspection
Bryan Keels tuner deletes the code
@@jasonnnbs obd2 smog test pass? After tuning?
Injectors