#bmw #g310 #motorcycle #starterclutch In this video we replace the starter clutch on a bmw g310r I believe the process is the same on a GS as well. Enjoy!!!
Matt when I watched the vid about starter clutch problems I almost changed my mind on purchasing a GS. After seeing just how easy it is to DIY with proper tools, all fears have relieved. Great instructional video. Thank You Sir.
I've been informed by a knowledgeable friend that the design of this starter clutch with that flimsy 'garter spring' is very similar to that used on some Rotax motorcycle engines and is equally as fragile. Great video, very informative, thanks, keep them coming.
Hi Matt Although I didn't encounter any problem yet with the stater clutch of my G310 GS, I liked to watch this video, as the others… I suggest, not to forget the "stopper" / locating pin on the right side, to attach the key to the orange strap. Thanks for your videos !
The flywheel puller is M30 x 1.0. the BMW puller is not in the states or germany as BMW dealers said. Just get another one using the measurements i provided. Also, to reiterate, "custom" cover guide pins are m6x1.0 100mm. You can also use a long allen key (m9) as a TDC locating pin. Although you CAN still order the locating pin (110 515) for $20 pick up, or $35 shipped from BMW.
Hi Matt fab video, but the starter clutch isn't available as a part, at least not here in the uk don't suppose you have a part number or where they can be bought thanks a lot 😊 terry
you stated in your first video, you would post a link or description of the flywheel puller tool....yet there is nothing :(.... can you reply with the correct size or tool link pls and ty
I have been Googling to find a source for the special BMW service tools - but with no luck. Do you have any recommendation (preferably a link!) on where I can buy them?
Hello my friend What is the pressure that the head screws have where the camshafts go I uncovered my motorcycle and everything was fine but I don't know what pressure the part where the camshafts fit in the upper part of the engine has
how about matt! Thank you very much for your videos, I follow your channel and thanks to you I have maintained my g310r. I'm writing to you hoping you can help me, yesterday my g310r did not mark the speed changes well, I put the pedal in "N" and it seemed to be in "1 gear", I raised the pedal to "6 gear" and the dashboard marked " 5 gear "and for" N "he should mark" - "on the board. I left it like that to review it the next day calmly and the triangle warning light with an exclamation mark lit up on the dashboard and in "gears" it only shows "-" and does not turn on. I passed the scanner to him and he drew error code "P0916". any ideas? I hope you can help me and thank you very much for your videos. sorry for the bad translation.
Hey bro, where did you get the starter clutch? Is it OEM part? I asked for it at my city bmw store, and they only have the starter clutch and magneto as one single piece.
@@MattsMotoWoRX 1 David VM, 2 Israel Ramirez, 3 LOF Motorsports, 4 dcdps, 5 Дрифт на Диком Западе, 6 Volker Michaelis. All these people had no one reply to them and they were asking questions. I know it takes a lot of time and the more popular youtubers get the harder it is do that too! Sorry, I just was noticing. On the other hand your detailed explanation of things in the few videos I've seen so far is excellent. Thanks!
Matt when I watched the vid about starter clutch problems I almost changed my mind on purchasing a GS. After seeing just how easy it is to DIY with proper tools, all fears have relieved. Great instructional video. Thank You Sir.
I've been informed by a knowledgeable friend that the design of this starter clutch with that flimsy 'garter spring' is very similar to that used on some Rotax motorcycle engines and is equally as fragile. Great video, very informative, thanks, keep them coming.
You are an excellent teacher. Pity BMW let this weakness get through.
Hi Matt
Although I didn't encounter any problem yet with the stater clutch of my G310 GS, I liked to watch this video, as the others…
I suggest, not to forget the "stopper" / locating pin on the right side, to attach the key to the orange strap.
Thanks for your videos !
You save me half way brother good stuff
Thanks for the video. I'm a GS owner and sure i'm gonna need it.
is this the problem on g310r?
Love this series of videos, great job
The flywheel puller is M30 x 1.0. the BMW puller is not in the states or germany as BMW dealers said. Just get another one using the measurements i provided. Also, to reiterate, "custom" cover guide pins are m6x1.0 100mm. You can also use a long allen key (m9) as a TDC locating pin. Although you CAN still order the locating pin (110 515) for $20 pick up, or $35 shipped from BMW.
I have a 2018 310GS and have this problem. Here in Uruguay (South America) repair cost U$S 1570. It is a lot of money!
Great video Matt, as always. Thanks a lot! A little typo in title "starter".
Matt's MotoWoRX, Great vodeo. My g310r has ABS active problem. It does not response. It does work abs light on and bing few time and out as usual .
Nice video, thanks. I HAVE THE SAME SITUATION WITH MY MOTORCYCLE.
Oi, tenho uma 310 faz 2 anos, seu trabalho é excelente e muito detalhista, abraço
Hi Matt fab video, but the starter clutch isn't available as a part, at least not here in the uk don't suppose you have a part number or where they can be bought thanks a lot 😊 terry
Thank you so much for your videos! Amazing details!!!
the puller seems to be a 30mm x 1.00
Great video man, helped me alot
Great job mate , your videos help us a lot, keep going
Could you add a video about replacing the starter relay?
you stated in your first video, you would post a link or description of the flywheel puller tool....yet there is nothing :(.... can you reply with the correct size or tool link pls and ty
Cheers Matt. Loving the videos. Saving me some serious $$$. Any chance of doing a fork oil change video? Thanks Mate
Well explained brother 🤘❤️❤️
I have been Googling to find a source for the special BMW service tools - but with no luck. Do you have any recommendation (preferably a link!) on where I can buy them?
83302420081 tool , you can find here: www.schmiedmann.com/en/product/e2041451-new?product=83-30-2-420-081
The code of part please oem or original parts number alibaba or amazon
Thanks for the video.Awesome.
Hi where can I buy extractor and engine block kits. And if you have Link for the starter kit. Thank you,
Hello my friend What is the pressure that the head screws have where the camshafts go I uncovered my motorcycle and everything was fine but I don't know what pressure the part where the camshafts fit in the upper part of the engine has
Hi sir im form phillipines me i ask my problem to my BMW g310r is if i start the motor thers no running good condition thers is no fast.
Where i can buy the tool for remove clucth start
how about matt! Thank you very much for your videos, I follow your channel and thanks to you I have maintained my g310r. I'm writing to you hoping you can help me, yesterday my g310r did not mark the speed changes well, I put the pedal in "N" and it seemed to be in "1 gear", I raised the pedal to "6 gear" and the dashboard marked " 5 gear "and for" N "he should mark" - "on the board. I left it like that to review it the next day calmly and the triangle warning light with an exclamation mark lit up on the dashboard and in "gears" it only shows "-" and does not turn on. I passed the scanner to him and he drew error code "P0916". any ideas? I hope you can help me and thank you very much for your videos. sorry for the bad translation.
Olá,tenho problema na embraiagem do motor de arranque, por quanto acha que fica a reparação?
Obrigado
Excelente video! Tnks
Hey bro, where did you get the starter clutch?
Is it OEM part? I asked for it at my city bmw store, and they only have the starter clutch and magneto as one single piece.
Thankyou sir
Well done!!
Great
Thanks
HI what is the part number for the bearing .
I need that part number too, can't find it
Hello, do you know what´s the size of the puller tool? Anyone?
Where do I get the special bmw tool….
Call bmw for pin, and order a m30x1.0 puller
Good day. Please tell me the number of the spare part and the number of the special tool?
I need the correct size of the puller tool ...,is 30mm x 1,25 correct ?
Did you find the right puller size?
Hello, do you know what´s the size of the puller tool? 30mm x 1,25?
Hi did you find the size for the magneto puller
M30x1.0
What size is your magnet estractor??
M30x1.0
Hi. Where can i purchase this special tools from?
Any BMW dealership should be able to get you the parts. I had these tools on loan from the local BMW dealer
@@MattsMotoWoRX
Thank you 👍
hi bro, what´s the size of the flyeheel puller tool? 30mm x 1,25???
Hello I need the correct size of the puller tool ...,is 30mm x 1,25 correct ?
M30x1.0
tell me the part number of the new clutch?
he doesnt reply
No,,, He doesn't reply does he!
What’s the question?
@@MattsMotoWoRX 1 David VM, 2 Israel Ramirez, 3 LOF Motorsports, 4 dcdps, 5 Дрифт на Диком Западе, 6 Volker Michaelis.
All these people had no one reply to them and they were asking questions. I know it takes a lot of time and the more popular youtubers get the harder it is do that too! Sorry, I just was noticing. On the other hand your detailed explanation of things in the few videos I've seen so far is excellent. Thanks!