How to adjust the valves on a bmw g310r. In this video I go over the valve inspection as well as how to adjust the valves. Gaskets: parts.mortonsbmw.com/cart.aspx
Hi Thank you for this video. This video, like all your other videos, helps me servicing my bike. For me, I own a G310GS. Many thanks and best wishes from germany/OWL
I've done the valve check on the old 650 Rotax motor - really quite easy. This, i'm sorry, I'm not going to attempt this, this looks like a fine small motor and I'll let the pros handle it. I do appreciate finally finding a video of the top end of this newly designed motor.
Absolutely love these videos! I was wondering if you could do one for the brakes, from replacing the rotors, pads, and doing a flush on the g310r. Thanks!
Hai sir IAM from South India your video is very useful to my TVs Apache rr310 cam chain tensaner I have don't know about that before seeing your video 😉 and I don a good job in my 310 in my shop tanks a lot.and also I need full feting engine video from you plz
Достаточно грамотно делаешь. Кстати, там есть отверстие справа на двигателе (заглушено болтом), через него можно зафиксировать коленвал от нежелательных проворотов во время регулировки.
Hello, thank you for this wonderful video, I followed you step by step, but after removing the cam shafts I got the crank moved, so how to set it back to its position?
Hello. I have one of these bikes and I’m currently struggling to get it started. My clutch was burnt out so I swapped it out and put the bike back together. I tried starting the bike but it wouldn’t start but it did try cranking over and gave good spark. I then noticed the bike was pushing air out of the throttle body instead of sucking air in and the exhaust was doing the complete opposite as well, taking air in but not pushing it out. I then realized I probably messed up the timing when I swapped out the clutch so I went back down there and watched this video to give me a solid idea of where I went wrong. I was able to tune the timing and got everything to line up like in the video. Once I tried to start the bike I didn’t even get a spark nor did it try cranking over like before so now I’m confused on where I went wrong?? Fuses are good and I’m getting some good clicks in all solenoids. Tank and air box are currently disconnected but the bike was cranking over fine without them before I gunned the timing.
Hi Matt, I mess the timing valves while changing clutch plate, after follow your video, I start the engine, it not started, and some voice and white smoke come from air filter, do you have any idea what's going on?
Hi Matt, thnx for sharing many helpful informations about BMW gs310. May I request to pls help me find your video about how to reinstall detached slide roller timing chain BMW310GS. This is because the dowell pins were unintentionally detached when the clutch cover was removed. I think this is also has something to do with hydraulic tensioner. Thank you very much.
Hey! I really need a specification on the shim size to know what shim kit to buy online. What is the diameter of the shims that I should buy? I would greatly appreciate the info!
@Matt; can you please confirm the valve shims are 8.80mm in diameter? Also, for clarity, you mention (@15:42) to "be careful not to change the crankshaft" when moving the timing chain. This seems like a person would need to pull on the timing chain quite hard to move the crankshaft? Any other advice? Lastly, and mostly unrelated....have you changed any of your bikes to iridium plugs? Thoughts?
Hello, notice that my 310gs overnight did not want to turn the board on but it does not start and I checked the gear, the alternators, the fuse, and everything is fine, could you help me? regards
now, it's a bit late but why you torque them to 25 Nm since the manual says 15 Nm? You said 18-20 lbs. A bit worried for this because can damage the threads in the cyl head if done multiple time.. what do you think?
Matt, that video was fantastic, I thank you so much for your time , patience and knowledge. If I were to find I did need to change the shims would you, if you had the time to be anal, measure and set each valve at the loose end of the spec anticipating the valves will tighten over time due to wear.
Yes definitely go to the looser end of the spec. The valves will stay in spec longer if you do it that way. Thanks for checking out the video glad it was helpful!!
Hey Matt. Good video. Can you shoot another one explaining why the 310's engine makes such a mechanical noise comparing to other brands like Honda and Yamaha? It´s a BMW characteristic? Why? Best regards from Brazil.
Olá Paulo, sou mecânico e j atendi algumas dessas mas sempre o que faço é resolver o problema e entregar para o dono e ainda não tive tempo para estudar esse motor, acho muito chato o tanto de barulho que ela faz , parece que estou entregando a moto sem resolver o problema porém aparentemente é uma característica da bmw , a gs 650 tem um barulho semelhante porém é grave, a gs 800 tem um barulho intermediário que nem é tão agudo e nem tão grave , mas se você reparar fazer barulhe parece uma caracteriatica BMW.
Anybody know know and could please tell me briefly how to set the base timing on the G310R? Is it TDC with the cams IN and EX level with the top of the head? Or something else?
Watcharapol Namjaidee I will put together a chain adjustment video on the g310r it should be similar. The only difference would be the actual measurement
giuseppe I personally would go by the service intervals recommended by BMW. If there is a noise and you’re unsure of what it is I would ask your local dealer what they think the noise could be
@@MattsMotoWoRX at 327 km I change the engine on warranty... On the new engine I have 200 km and I still feel the noise.. Not much like before, But if I make us case I feel it, but it is almost imperceptible
@@peppe3241 wat kid of noise is that... actually sometimes u get some noise frm abs unit but its common.....as tvs explained it was a reading unit and that doesn't harm anything.....
Please can you check the video of my channel my bmw motorcycle has a strange sound and I would like you to tell me if it is valve or no longer works haha thanks
I like the magnet trick. I’ve been a mechanic for 30 years. Now I’ll pass that onto my apprentices.Learn new tricks every day.
Hi
Thank you for this video.
This video, like all your other videos, helps me servicing my bike.
For me, I own a G310GS.
Many thanks and best wishes from germany/OWL
Thanks! I know this video will be very helpful for me in future.
Thanks for your work and time! Good presentation of material.
Matt !🎉thanks !! Nice and high quality video !!
I've done the valve check on the old 650 Rotax motor - really quite easy. This, i'm sorry, I'm not going to attempt this, this looks like a fine small motor and I'll let the pros handle it. I do appreciate finally finding a video of the top end of this newly designed motor.
You are the Man!!!!
cool , so adjasting valve , just changing shins depending od state of parts...
good video , ...
Thx u for videos men!
great video... good stuff
Great video🎉
Very good video...
Thanks and its descriptive enough
Absolutely love these videos! I was wondering if you could do one for the brakes, from replacing the rotors, pads, and doing a flush on the g310r. Thanks!
Nice sharing!!! Thank you
Good Detail
Hai sir IAM from South India your video is very useful to my TVs Apache rr310 cam chain tensaner I have don't know about that before seeing your video 😉 and I don a good job in my 310 in my shop tanks a lot.and also I need full feting engine video from you plz
You just save me from bending a valve. Thanks, Matt !!!
Very helpful
Thanks for the video and it helpful 👍🏽
''HEADPHONE ALERT''! This dude loves to BLAST unexpected music.
Surprise! Sorry about that I’m a better mechanic than I am videographer
your content is good enough on its own. less is more mate. Kenman
@@MattsMotoWoRX
Достаточно грамотно делаешь. Кстати, там есть отверстие справа на двигателе (заглушено болтом), через него можно зафиксировать коленвал от нежелательных проворотов во время регулировки.
bro nice video . its like open heart surgery
Very nice helpful video 🛠️🛠️⚙️⚙️🔩🔧 thenkou so much updated video sir
Hello, thank you for this wonderful video, I followed you step by step, but after removing the cam shafts I got the crank moved, so how to set it back to its position?
Great info Matt. My exhaust cam jumped time, how do i reset timing? I cant find a service manual anywhere.
Show de vídeo
Hello. I have one of these bikes and I’m currently struggling to get it started. My clutch was burnt out so I swapped it out and put the bike back together. I tried starting the bike but it wouldn’t start but it did try cranking over and gave good spark. I then noticed the bike was pushing air out of the throttle body instead of sucking air in and the exhaust was doing the complete opposite as well, taking air in but not pushing it out. I then realized I probably messed up the timing when I swapped out the clutch so I went back down there and watched this video to give me a solid idea of where I went wrong. I was able to tune the timing and got everything to line up like in the video. Once I tried to start the bike I didn’t even get a spark nor did it try cranking over like before so now I’m confused on where I went wrong?? Fuses are good and I’m getting some good clicks in all solenoids. Tank and air box are currently disconnected but the bike was cranking over fine without them before I gunned the timing.
Hi, have you solve the problem yet, I have same issue after adjust timing
Hello, do you ask that the G310R coil has a spring between spark fluge and coil?
Are there any top dead center marks for changing a broken timing chain.
Hello, I’m having an issue with my g310 and need new steering wheel bearings. Do you advise me to go for the original set of bearings or a Koyo ones?
Hello, do you have the procedure on setting the original timing if the engine moves without the lock tool installed?
Hi Matt, I mess the timing valves while changing clutch plate, after follow your video, I start the engine, it not started, and some voice and white smoke come from air filter, do you have any idea what's going on?
Hi Matt, thnx for sharing many helpful informations about BMW gs310. May I request to pls help me find your video about how to reinstall detached slide roller timing chain BMW310GS. This is because the dowell pins were unintentionally detached when the clutch cover was removed. I think this is also has something to do with hydraulic tensioner. Thank you very much.
Hey! I really need a specification on the shim size to know what shim kit to buy online. What is the diameter of the shims that I should buy? I would greatly appreciate the info!
Is there a video about oil change in right and left fork?
Is it possible to install a cover with sealant on an old gasket?
@Matt; can you please confirm the valve shims are 8.80mm in diameter? Also, for clarity, you mention (@15:42) to "be careful not to change the crankshaft" when moving the timing chain. This seems like a person would need to pull on the timing chain quite hard to move the crankshaft? Any other advice? Lastly, and mostly unrelated....have you changed any of your bikes to iridium plugs? Thoughts?
Hello, notice that my 310gs overnight did not want to turn the board on but it does not start and I checked the gear, the alternators, the fuse, and everything is fine, could you help me? regards
And the mark of the cramshaft gear how it goes?
now, it's a bit late but why you torque them to 25 Nm since the manual says 15 Nm? You said 18-20 lbs. A bit worried for this because can damage the threads in the cyl head if done multiple time.. what do you think?
Would like to know how to check and adjust timing.
do you have to take the crash bars off for this?
Hello, where can I buy spare parts for the engine for the g 310 gs, thanks
Hola que tal.
Una pregunta duda, para poner a tiempo la bmw 310 cc.
Como le puedo hacer amigo.
Gracias
Hi this is sagar from India, can you help me where exactly side indicator switch so I can install hazard light switch on it without cutting any wire
Matt, that video was fantastic, I thank you so much for your time , patience and knowledge. If I were to find I did need to change the shims would you, if you had the time to be anal, measure and set each valve at the loose end of the spec anticipating the valves will tighten over time due to wear.
Yes definitely go to the looser end of the spec. The valves will stay in spec longer if you do it that way. Thanks for checking out the video glad it was helpful!!
Hey Matt. Good video. Can you shoot another one explaining why the 310's engine makes such a mechanical noise comparing to other brands like Honda and Yamaha? It´s a BMW characteristic? Why? Best regards from Brazil.
Because its a piece of crap…. I own a GS310 by the way..!!
@@wowsusy Indeed. I sold mine
Olá Paulo, sou mecânico e j atendi algumas dessas mas sempre o que faço é resolver o problema e entregar para o dono e ainda não tive tempo para estudar esse motor, acho muito chato o tanto de barulho que ela faz , parece que estou entregando a moto sem resolver o problema porém aparentemente é uma característica da bmw , a gs 650 tem um barulho semelhante porém é grave, a gs 800 tem um barulho intermediário que nem é tão agudo e nem tão grave , mas se você reparar fazer barulhe parece uma caracteriatica BMW.
Anybody know know and could please tell me briefly how to set the base timing on the G310R? Is it TDC with the cams IN and EX level with the top of the head? Or something else?
Lisa Haynes It’s explained in the video
please i need an anser , can i put a g310 r engine into a g310 gs without switching the ecu
I don’t know
How to adjust chain 310gs
Watcharapol Namjaidee I will put together a chain adjustment video on the g310r it should be similar. The only difference would be the actual measurement
Why you adjust the valves? The engine of my g310r has a noise like "tic tic tic tic" it's possible are the valves? Sorry for my english
giuseppe I personally would go by the service intervals recommended by BMW. If there is a noise and you’re unsure of what it is I would ask your local dealer what they think the noise could be
@@MattsMotoWoRX at 327 km I change the engine on warranty... On the new engine I have 200 km and I still feel the noise.. Not much like before, But if I make us case I feel it, but it is almost imperceptible
@@peppe3241 wat kid of noise is that... actually sometimes u get some noise frm abs unit but its common.....as tvs explained it was a reading unit and that doesn't harm anything.....
Best Video available to help you check and adjust valve clearance on BMW G310 if needed!!
check it out and subscribe!
G310 r full engine fitting
Please can you check the video of my channel my bmw motorcycle has a strange sound and I would like you to tell me if it is valve or no longer works haha thanks
The music is anoingly louder than your speech requires a volume adjustment every time you play it!
My early days of CZcams I apologize for that
Looks an utter ball ache,Im dreading what BMW will charge when mines is due....
Thanks! I know this video will be very helpful for me in future.