Join us as we start to prep the tow truck for the new engine! Follow us! / garthsgraveyard / garths_graveyard garthsgraveyar... Donations donorbox.org/b... #abandoned #wrecker #towtruck #revival
I'm NOT gonna bust on you for not already pulling the oil pan. I WILL applaud you for removing it BEFORE you flipped the engine upside down. This keeps all the gack laying in the bottom from falling into your reciprocating assembly. BRAVO! Keep up the good work.
Don't worry about what others say and once again,you're little girl is so attentive and once she gets bigger,look out she will be telling you what to do,lots of love to you and your family Jim
it's just you and the girls turning wrenches ...don't let the armchair mechanics get under your skin ..keep doing you and let the haters hate when your build is complete and they have no content of their own builds..you know people will always find something to complain about ..i've been turning wrenches over 30 years and you do things the same way i do..stick to your guns and do your thing..sending some love from Alabama
The memories you are making with your girls......totally awesome. I really like your content as well. I really like Clyde....late 60's/early 70's GM trucks are my favorite....next to the "bubble hood" 1950 Chevy. Square bodies are a close 2nd. God bless you and yours. Awesome channel. Your obvious frustration with keyboard mechanics, honestly, was comical. I like the way you addressed them on this episode.
Another fantastic video. Sorry about the microphone issue. I had a 68 Chevy k30 dump truck that had a pto wrecker winch on the front. I love the simplicity of the 67-72 trucks.
Let’s play, “What’s in the Lower End,” lol! You know what you were doing, I had no concerns. Great job putting in those, engine mount bolts, warmed the cockles of my heart.
I just found ur videos I'm like you love the old GMC trucks built a few in my times my grandfather liked the Chevy I liked GMC he use to tell me GMC stands for got mechanic coming I say it god made chevy
I love your channel been here since the first video. Gotta love unsolicited advice. Please don't stop making videos cause of people nagging you. They'll get used to the fact that you don't show every little step and that you know what you're doing!
Went silent movie there for a bit hahaha!! just giving ya crap man. Loving seeing the progress and congrats on the 10k mark that looks to be just around the corner!
You may want to check that small block and make shore it is drilled out for the clutch linkage there is a bolt with a ball cast on it that treads in the block right buy the oil filter mount and bellhousing a lot of blocks were not drilled out because they were for use in automatics it is alot easier to drill out of the truck, askme how i know, good luck
That engine bay will clean up real nice. Good job. I'm only half way through, I wonder what kind of connector plate you'll need for the bell housing. That bit always worked out expensive for me. 😮
In my defense, I got the impression that you were done with the engine in the last video. In fact, you were done with the top end. I never ever have harassment in mind when I leave a comment. Love the video and the progress on Clyde. Also I seen some folks use a winch mounted somewhere in the garage. I don’t think it’ll work in your garage though
Let em think what they want! Not their truck not their engine! You can't waste all your time proving stuff to anyone! Or you'll never get anything done!
Maybe you were not in a great mood but I had to turn it off. You were focused on the negative viewers for some reason. Usually focused on positive and education. Everyone has an off day. Still like the videos!
I'm NOT gonna bust on you for not already pulling the oil pan. I WILL applaud you for removing it BEFORE you flipped the engine upside down. This keeps all the gack laying in the bottom from falling into your reciprocating assembly. BRAVO! Keep up the good work.
You dont have to answer to any of us! Its your garage, your channel. Love that you get your girls in there from time to time!
Awesome job
Your daughter is awesome the way she helps you in the garage
I grew up watching the Duke's of Hazzard back in the 90's but still like watching you're videos and yes I to watch VGG
Don't worry about what others say and once again,you're little girl is so attentive and once she gets bigger,look out she will be telling you what to do,lots of love to you and your family Jim
I am still kinda convinced that that tow truck you have was cooters. GMC tow truck from the dukes of hazard you might have a piece of history there!!💗
Great job! Keep on doing what you do. Screw the nasayers, and do things your way.
Maybe a special segment, now and then, “Little One’s Garage,” where she works on a kid sized project, lol.
Wow, that oil pan was not near as bad as I thought it would be. Awesome news.
See ya got the boss in with ya today.
Reminds me of my daughter.
She's a mechanic now.❤
it's just you and the girls turning wrenches ...don't let the armchair mechanics get under your skin ..keep doing you and let the haters hate when your build is complete and they have no content of their own builds..you know people will always find something to complain about ..i've been turning wrenches over 30 years and you do things the same way i do..stick to your guns and do your thing..sending some love from Alabama
A “free” engine is better then no engine!
Keep up the good work and don't worry about what everybody else saying and tell the boss lady there she's doing a good job keep it up
The memories you are making with your girls......totally awesome. I really like your content as well. I really like Clyde....late 60's/early 70's GM trucks are my favorite....next to the "bubble hood" 1950 Chevy. Square bodies are a close 2nd. God bless you and yours. Awesome channel.
Your obvious frustration with keyboard mechanics, honestly, was comical. I like the way you addressed them on this episode.
its a shame that people have to look for something to pick to pieces looking good Glad to see your family is interested
I'm surprised how good that bottom end looked! Good job for that hole I'd say.
Riley is gonna be a good mechanic! ... well... maybe a good helper! 😂
I think she'll get there!
Looking forward to seeing the engine installation.
Great video as always, despite the audio problems.
Never mind it is what it is.
Thanks dude.❤😊
Another fantastic episode and Ur little lady is adorable
Another fantastic video. Sorry about the microphone issue. I had a 68 Chevy k30 dump truck that had a pto wrecker winch on the front. I love the simplicity of the 67-72 trucks.
Those mics aggravated me pretty bad, so I have a new set showing up tomorrow!
Hopefully the new one works out for you. Good luck.
Let’s play, “What’s in the Lower End,” lol! You know what you were doing, I had no concerns. Great job putting in those, engine mount bolts, warmed the cockles of my heart.
Boy they saved that motor by damaging the oil pan !!!!! What a lucky break !!!!!!
I gotta say your channel sir is absolutely wholesome and great !! Keep up the great work sir
I just found ur videos I'm like you love the old GMC trucks built a few in my times my grandfather liked the Chevy I liked GMC he use to tell me GMC stands for got mechanic coming I say it god made chevy
I like your version 😁
Don't listen to keyboard warriors lol you just do your thing love the channel
I like the videos just do your thing don’t worry about the hater’s
Man ur only a few miles away from where I live that’s kool
I love your channel been here since the first video. Gotta love unsolicited advice. Please don't stop making videos cause of people nagging you. They'll get used to the fact that you don't show every little step and that you know what you're doing!
We're definitely not going anywhere and have big plans 😊
@@garthsgraveyardgarage Can't wait to see what is in the future for the channel! My husband has a 71 Monte Carlo he's been slowly working on. 😁
I love your videos man. Keep them coming.
Liking this channel, love the old GMC's.
Thanks for bringing us along on your journey. I can't help but wonder what a VW bus would look like with that monster bug treatment 🤔 😮.
Thank you brother,
Little fingers leaning new things 😎👍
You got this man im starting out with a channel myself so well See
Great video, gotta say good name for the truck. LOL.
Went silent movie there for a bit hahaha!! just giving ya crap man. Loving seeing the progress and congrats on the 10k mark that looks to be just around the corner!
You may want to check that small block and make shore it is drilled out for the clutch linkage there is a bolt with a ball cast on it that treads in the block right buy the oil filter mount and bellhousing a lot of blocks were not drilled out because they were for use in automatics it is alot easier to drill out of the truck, askme how i know, good luck
The mount holes were there.
Garth’s Garage: Car Cancer Treatment Center.
Just my opinion but that engine is way to good for that truck find a old nova or something like that to use it in
That engine bay will clean up real nice. Good job. I'm only half way through, I wonder what kind of connector plate you'll need for the bell housing.
That bit always worked out expensive for me. 😮
I thought I'd gone deaf. Lol😂😅😂
I’m 47 and have been told since I was 16 that 4-bolts are for selling…2-bolts are for building.
Umm that's the other way around. Also 2 bolts are for juice, 4 bolts are for boost.
4 bolts can handle much higher horsepower builds.
In my defense, I got the impression that you were done with the engine in the last video. In fact, you were done with the top end. I never ever have harassment in mind when I leave a comment. Love the video and the progress on Clyde.
Also I seen some folks use a winch mounted somewhere in the garage. I don’t think it’ll work in your garage though
There's one mounted to the ceiling.
Hey man, what's with the audio? It sounds like someone sharpening a long sword? loving your downt to earth style
That's why I put the audio disclaimer at the beginning of the video. It's also why I purchased a new set of mics 😁
👍
Good episode. Can you spray paint over the rust inhibitor ?
Yes, it works as a primer.
Let em think what they want! Not their truck not their engine! You can't waste all your time proving stuff to anyone! Or you'll never get anything done!
Anybody else loose audio at about the 13:00 mark?
That's why there was a disclaimer near the beginning of the video.
@@garthsgraveyardgarage sorry I got that but thought it was for poor audio-I wasn’t expecting to loose audio completely I guess.
What did the casting numbers on the heads come back to? Looks like a set of 882 heads.
I didn't check since they were stock looking heads.
Philo Beddoe..........
Maybe you were not in a great mood but I had to turn it off. You were focused on the negative viewers for some reason. Usually focused on positive and education. Everyone has an off day. Still like the videos!
You.lost sound in the video for some time after you.powerwashed
That's why I put the disclaimer at the beginning of the video about my microphone.
Dude, stop reacting to the crybabies, you will never make em all happy. Just do your thing and forget em.
You tube blows.......it's been 5 days since this video posted and it is just now reaching my feed
Be sure notifications are turned on so you don't miss an episode 😁
@@garthsgraveyardgarage they are
YT has been glitchy lately.
Good channel, lots of cool projects.
You do know, you can turn that engine upside down on the stand.
I wanted to keep everything in the pan where it was.