@@Logan-ml2dt short of it is, stock bottom end, oring block, stock gasket, arp's and welded stock cam 885 head, 2.7L bottom end, and rings were checked for clearance. cough cough 1 years later lmfao and worn ass bearing. www.bimmerforums.com/forum/showthread.php?2354234-Turbo-e30-street-car&p=29941854#post29941854 Yes i reinstalled those bearings in 2018.......
Stock b27 bottom end with oring head gasket and welded stock 325i head. Corn fuel + 24psi of boost. New twin disk clutch from DKM. About the pull the triger on a Haltech Elite 2500 for it :D Hopefully the MS issues are no longer a problem!
Damn this thing moves! I have a turbo e30 myself that I'm trying to tune currently on MS. Do you have a link to your pump gas ignition timing table or would you be willing to share yours?
Use a smaller turbo. Going to lose some power on the top end but that’s the trade off. Laggy power band with a lot of power at the top or strong power band with good power the whole rev range.
I'm so glad I came across this build ever since I bought my 87' white coupe 325e 2 weeks ago. Sometimes I dream that's me in the drivers seat haha
Haha yup you can get there sooner then later. It took me too many years but learn from my mistakes.
@@euro2fast4u Yeah i've been trying to find some time to read your entire build thread!
@@allkindofstupidstuff I'm glad you found it on bimmerforums!
@@euro2fast4u So am I! There are so many builds that are unpublished on forums and youtube.
@@euro2fast4u hey man can i get the link for the build forum? i am curently working on my 87 325es
You should do an engine overview video of this thing
Like what's done to it?
@Logan ?
@@euro2fast4u Ya
@@Logan-ml2dt short of it is, stock bottom end, oring block, stock gasket, arp's and welded stock cam 885 head, 2.7L bottom end, and rings were checked for clearance. cough cough 1 years later lmfao and worn ass bearing.
www.bimmerforums.com/forum/showthread.php?2354234-Turbo-e30-street-car&p=29941854#post29941854
Yes i reinstalled those bearings in 2018.......
Hey dude. Love the build. What’s been done exactly? I’ve just picked up a 325i myself
Stock b27 bottom end with oring head gasket and welded stock 325i head. Corn fuel + 24psi of boost. New twin disk clutch from DKM. About the pull the triger on a Haltech Elite 2500 for it :D Hopefully the MS issues are no longer a problem!
@@euro2fast4u how boost? 👀
@@Polini599 this run about 24 psi
Damn this thing moves! I have a turbo e30 myself that I'm trying to tune currently on MS. Do you have a link to your pump gas ignition timing table or would you be willing to share yours?
Shoot me a dm I'll see what I can do. Sorry never saw this pop up.
what size turbo is this? awesome vids man
Thanks dude. Been having issues getting parts hopefully have an update shortly. PT6176E btw. Hope to be up and running this week
Nice car
What program is that ?
Racerender
Whats all done to your m20 id be interested in the info since i just picked up a m20
Basics were a stock 2.7, checked ring gap, o ring block, welded 885 head and arps.
That is quite a lot of turbo lag, isnt it ? From 40 to 60 to get full boost. Is there anyway to get this thing spool faster ?
Use a smaller turbo. Going to lose some power on the top end but that’s the trade off. Laggy power band with a lot of power at the top or strong power band with good power the whole rev range.
@@sethg5195 that is what i m planning too, 0,8 A/R 63mm turbine wheel twinscroll housing. I should be fine with very little lag.
It really depends on how you use the car. Nitrous has always been on the list of adders to support the spool time.
Hey what does CLT and MAT on the right side mean?
Clt is coolant temp and mat is mass air temp or intake air temp
@@euro2fast4u Oh cool thanks, also what’s that horizontal bar in the top middle?
@@pranavk8293 ignition timing in degrees
anything done to the head ?
Welded the coolant jackets and about 400k miles on it.
@@euro2fast4u stock cam ?
@@TurbineResearch yes stock cam
What ratio diff?
I’m guessing a 2.93
2.79 lsd
Can I have. Ore build info just bought one ???
Yup I can build you one
Where can I contact you
@@Mena6e.c7 Lets try instagram, shoot me a message @euro2fast4u
hp ??
This was maybe around 450whp
and what is the top speed ?
@@gonzalovicente2195 unknown, if enough road, could be 190+
dope thanks for answering
Oh i tought it‘s kph nvm lol
is that better or worse lol
@@euro2fast4u way faster, 1mph equals to 1,6kph