I spent 30 years in the mechanical field, I never allowed anyone in the dyno, that place is a high risk area where anyone can get badly injured or loose his life.
"Let's stand right NEXT to the 40 psi boosted engine to watch the dyno pull!!" Did you see all those Supras grenading turbos! How about a 100,000 rpm impeller buzz saw bouncing up your baggy shorts....
I saw a video a while back of a guy standing about 20 ft away from a car that was on a dyno. Turbo blew and a shard went flying right at that guys neck or face. Instantly fell to the ground, lifeless, and started bleeding out. Friends just walked up to him in the most calmest manner but I believe that it was only due to the shock and not realizing that it was real.
The lack of safety in all these runs is astounding, dudes standing in front of a machine making 1000hp held back by 2 nylon straps, stepping on/around the rollers, standing right next to the motor at 9krpm @_@
Exactly, it’s like playing Russian Roulette....anything on that engine comes apart during that pull and it just might be the worst day of your life. Buddy of mine had a turbo failure during a pull similar to the Supra that spit the turbine out the exhaust. Long story short it took 2 gouges out of the floor, ricochet off that floor AND EMBEDDED ITSELF INTO THE CEILING. If someone had been standing anywhere near the side dump on the car, they’d have been killed-
@@eddiehimself as someone taught by a bunch of old former engineers and motor company mechanics, wed call them "fucking idiots" or maybe, "stupid shits" all competing for that darwin award
I blew a turbine wheel out a downpipe once. The first bend it hit it breached right thru. Looks like the end of Elmer fudds gun after Buggs sticks his finger in the end. And it had a nice barrel roll dent along the pipe before the breach.
Maybe I'm just paranoid, but I wouldn't want to be anywhere near those dynos during the run. Seems like a good way to get connecting rod chunks inside me
@@SethBergile No, he means intake manifold gaskets. I'm an actual mechanic, not a CZcams engine "expert" like you kid. I was building race cars probably before you were born. And he's right, the EXTREME vast majority of these are intake &/or turbo blow ups, not catastrophic engine failures... NOOB! Don't try to correct the adults kid.
@@jennifertester425 the joke is about the size of the turbo. Turbos are always smaller than a car, but this one is so big that it looked as if the car was part of the turbo. If you were being sarcastic I apologize :)
Seems incredibly irresponsible for people to be just standing around while they're trying to blow up an engine. Well...gotta learn the hard way I guess.
nah that's just the motor rocking back when it hit all that boost. Stiff motor mounts can still flex. But a head lifting is visually impossible to see, thousands of an inch is all it takes. Unless the head studs were hand tight...but then it wouldn't run at all lol.
Haha “You can literally see” at 0:36 they blew the hose off the coolant line. Way too much fluid all over the place for it to be a head. When you lift a head or blow a gasket most of the fluid goes into the crank case with the oil.
I always wondered how mechanics know if everything on the car will work under such tremendous force such as wheel bearings axles belts pulleys it’s satisfying seeing trial and error videos especially Dyno fails
Decently the customers and work staff need better protection. A turbine wheel broke and came out at such force it would of hit you, that’s its lights out call for a body bag. Nice video as plenty of new clips to watch
Gonna say it one more time. This video is not only about explosion. Its about dyno run fails. During a dyno run a hose can fail, an engine can explode, turbocharger can explode and even someone walking over the rollers is a failure🤣 so just watch the video and leave a comment. Thanks guys!
smh, gotta tune your car first egghead, otherwise youll waste money blowing engines. Better it blow up on the dyno, than leave you stranded in the middle of no where.
@@DGOfTheCentury - Sounds like you’re doubling down on the stupidity. Two places I wouldn’t want to blow my engine up...? 1. In a garage. 2. The middle of no where? Again... Why?
Despite the IDIOCY of the people standing around... This is actually a good advertisement for 2J-ZEDs!!! 😜 Impeller Wheel implosions, Intake Tube rupture, Turbo Housing explosions, Tire explosions.... But nothing to do with the basic Block!!
I know what you mean.. stupid to be so close to so many moving parts, one of any number of things fail and hit you and you may be dead.. piston, rod, tire, drive shaft or ujoints, turbo, cooling fan, and many more..
In my humble opinion there is no need for a Dino. The only reason ‘most” people get one is so they can show off how much horse power their vehicle makes. Those who truly race are a doing it to get the absolute most out of their vehicle, but honestly the rest will never use no where close to the power that their vehicle makes.
I use to put semi's on dyno lots of chain downing and exhaust fan systems. New ones are fun when the paint burns off the exhaust manifold starting fires at times One I remember had it up to 130 mph, can't imagine towing a trailer behind that rig and where it would happen. Guess out west on long straight highway
1:40-What kind of business allows this spectator crowd access to the test room DURING TESTS.? 3:04-The alpha idiots. 4:14-Vanity tag showing drivers IQ=3.4
First, you air the tires to max pressure shown on the sidewall. Then you run on the dy no for 2 minutes, then you give the tires a 30 minute cool down before you run it again. Anyone that owns a chassis Dino should know this.
The reason dynos go wrong is due to incompetence and lack of maintenance on both the customer's and tuner's part. If I want my car dyno tuned I would have not used NOS, a big turbo which results in too much boost, or wrong oil or coolant
The finest selection of wallet emptyings I have ever seen.
Ha man yeah!
Car? No. Extremely expensive Paperweight
Wallet emptying, 401k digging , kids college fund snatching and pinching into my wife's savings account selection
The old man was the smartest
@@toxicity6629 desposition 0:24
I spent 30 years in the mechanical field, I never allowed anyone in the dyno, that place is a high risk area where anyone can get badly injured or loose his life.
Please be careful guys and make a fun day in the shop a plesent and great day.
You can also lose your life
I agree anything can hurt you in the dyno rooom
Papa!!
@@darrininverarity4297 yes young man I am an old man already having the time of my life in the endless summer paradise Puerto Rico.
Got to love the people that stand in front and behind them dynos at those speeds. Darwin anyone?
Balls of steel or just plain idiots
"Let's stand right NEXT to the 40 psi boosted engine to watch the dyno pull!!"
Did you see all those Supras grenading turbos!
How about a 100,000 rpm impeller buzz saw bouncing up your baggy shorts....
I saw a video a while back of a guy standing about 20 ft away from a car that was on a dyno. Turbo blew and a shard went flying right at that guys neck or face. Instantly fell to the ground, lifeless, and started bleeding out.
Friends just walked up to him in the most calmest manner but I believe that it was only due to the shock and not realizing that it was real.
Question of the day: "Do you have insurance??"
No PPE at all. So cool or so dumb.
"Just up the boost another 3 psi. What's another 3 psi?"
About $6000.
This made me laugh lol
Hahahaha
“…and needing to spend a lot of time hunting up the parts.”
@@dennisyoung4631 1 month Delivery time.
The lack of safety in all these runs is astounding, dudes standing in front of a machine making 1000hp held back by 2 nylon straps, stepping on/around the rollers, standing right next to the motor at 9krpm @_@
Exactly, it’s like playing Russian Roulette....anything on that engine comes apart during that pull and it just might be the worst day of your life. Buddy of mine had a turbo failure during a pull similar to the Supra that spit the turbine out the exhaust. Long story short it took 2 gouges out of the floor, ricochet off that floor AND EMBEDDED ITSELF INTO THE CEILING. If someone had been standing anywhere near the side dump on the car, they’d have been killed-
The worst part is it probably won't kill you
Agreed. As a former mechanical engineer, they are what we would officially term "silly sausages."
@@eddiehimself as someone taught by a bunch of old former engineers and motor company mechanics, wed call them "fucking idiots" or maybe, "stupid shits" all competing for that darwin award
Welcome to serbia 😂
When there's something wrong with my car, I watch these videos just to calm myself
Haha
Good deal
Because its not as bad as these ne too
The old dude tripping floored me
Ha... floor
He did floor himself
He didn’t trip. He stepped on the dyno roller while it was still rolling.
Stepped on the dyno drum, tried to spit him out the door!
On one hand, I feel bad for the older guy but on the other, he (and everyone else) couldn't have been more careless and he paid the price.
👍😂 I love the whole “ I don’t know how much boost my engine can take, but I know how much I’m going to use” attitude from theses guys! 😂
At least the dyno didn’t shuck the old guys leg like a corn husk
That gotta ( *really* ) hurt.
That could have gone so horrifically bad.
Limb amputation sort of stuff. People standing right next to that unprotected engine were asking for trouble too. I guess none of them is still alive.
@@randomdude239 More like:
They were alive.
who tf let his old ass in there anyway
That orange supra with the broken turbine could have easily killed, and shredded some one, like go straight through them if it did that to concrete.
I blew a turbine wheel out a downpipe once.
The first bend it hit it breached right thru.
Looks like the end of Elmer fudds gun after Buggs sticks his finger in the end.
And it had a nice barrel roll dent along the pipe before the breach.
when something jumped out of the engine off that orange supra, i was already like "uh oh"
That old dude falling so early on in the compilation makes watching this all worth it 😂😂😂😂
If the dyno's purpose is to blow up engines, mission accomplished.
Yo whoever welded the supra downpipe that shot the turbine put of it deserves a raise
Maybe I'm just paranoid, but I wouldn't want to be anywhere near those dynos during the run. Seems like a good way to get connecting rod chunks inside me
That man’s foot went from 1-100 in less than a second
Faster than Usain Bolt
7:42 I love how it's a normal acceleration...
7:50 but then it goes full Nitro
0:50 Stretched tires, 600HP, and high speed on the dyno. What could _possibly_ go wrong???
The car owner must be one of my family member lol
At least they had the sense to operate the camera with a tripod, and presumably hide behind something
It's fun to watch because we're not paying for it.
I don’t feel like I’ve ever seen a dyno go right on the Internet.
You don't see the successes, only the failures.
The majority are cooling system failures and tyres blowing up!!!
Right??? I only saw a couple real engine blow ups... and one dyno (red mustang gt500).
Cooling System failures? Ohh you mean Head gasket failures. Noobs
@@SethBergile No, he means intake manifold gaskets. I'm an actual mechanic, not a CZcams engine "expert" like you kid. I was building race cars probably before you were born. And he's right, the EXTREME vast majority of these are intake &/or turbo blow ups, not catastrophic engine failures... NOOB! Don't try to correct the adults kid.
@@dawgzfan27 Lol shut the f up dude Im F1 mechanic, youre amateur compared to me
Yeah it’s mostly just clickbait
15:00 They put a supra on that turbo
it’s 5 am and you got everyone in my house thinking i’m being murdered🤣🤣🤣
Lol
You mean they put a turbo on that Supra
@@jennifertester425 the joke is about the size of the turbo. Turbos are always smaller than a car, but this one is so big that it looked as if the car was part of the turbo. If you were being sarcastic I apologize :)
@@josefacundoabiega6146ok
Jack Nicholson voice YOU WANT THE BOOST? YOU CAN’T HANDLE THE BOOST!!!
1:50 grandpa needs a tune.....
need some boost
Seems incredibly irresponsible for people to be just standing around while they're trying to blow up an engine. Well...gotta learn the hard way I guess.
Theyre not intentionally trying to blow it up, it just happens
Will this set up work on my car ? “Well yes but actually no” 🤦♂️🤣
I'll never get tired of seeing a diesel bro truck blow up...
1:55 HAHA I WASN'T EXPECTING THAT
I thought in my head that car is gonna explode and i thought what if someone steeped on it and when he stepped on it it scared the fuck outta me
@เกม เมธา he could of went under the cars tire
Me neither lmao
I shouldn't have laughed, I'm going to hell
i kinda felt its gonna happen
15:00 imagine that turbo sucking everything around it and turning into a black hole. 😅
turbo devours whole universe
My ex wife does a similar thing to men
@@DG-EditsMedia where can I find her? 😅
@@catalinbanici3357 prison
@@DG-EditsMedia that makes sense tho...
Notice how a bunch of them didn’t have fans blowing or any sort of cooling happening. No wonder some of them blew up.
I was going to comment this
11:00 how my parents sound when they talk to me about stuff
The first one you can literally see all that hot coolant lift the head up and spew out of the sides 😬
The boost is lifting the head
Yeah way to much boost.. prob stock head and seals
you’ve got some eyes lmao i had to slow the video to see it
nah that's just the motor rocking back when it hit all that boost. Stiff motor mounts can still flex. But a head lifting is visually impossible to see, thousands of an inch is all it takes. Unless the head studs were hand tight...but then it wouldn't run at all lol.
Haha “You can literally see” at 0:36 they blew the hose off the coolant line. Way too much fluid all over the place for it to be a head. When you lift a head or blow a gasket most of the fluid goes into the crank case with the oil.
the guy that fell on the dyno made me laugh so hard
THE 2JZ BEAST destroyer of turbos and well anything thats in the immediate vicinity
Poor cars they had to suffer at the hands of their human operators!
One of these the engine didn’t even blow up, but I’m still so glad you included it 😂 glad he’s alright
Love watching 'Blowin' Coal' explode. Carbon Tax.
8:20 !!!
The second I saw the live leak badge in the corner I’m like “oh no!”😂
Great way of letting you know if something is wrong with ya engine.
14:14 it's like the snake in a can prank. Lol
Love videos where people have tried to record something with a potato. Those 4 pixels really shows what is going on
That turbine wheel could have sliced a human into pieces
I always wondered how mechanics know if everything on the car will work under such tremendous force such as wheel bearings axles belts pulleys it’s satisfying seeing trial and error videos especially Dyno fails
14:15 its just a feature, engine mod comes with a built-in canon! xD
💀💀
Decently the customers and work staff need better protection. A turbine wheel broke and came out at such force it would of hit you, that’s its lights out call for a body bag. Nice video as plenty of new clips to watch
Sad days man considering how much hard work was put in
5:42 the customer should thank these guys for essentially admitting negligence here lol. Pay up tuner shop 🤣
Almost had me?! You never had your car!
I giggle every time an import blows up.
Gonna say it one more time. This video is not only about explosion. Its about dyno run fails. During a dyno run a hose can fail, an engine can explode, turbocharger can explode and even someone walking over the rollers is a failure🤣 so just watch the video and leave a comment. Thanks guys!
Say it all you want, but I don't get the point you are trying to make.
This just got recommended to me and my mk3 supra gets tuned on the dyno tomorrow... is this a sign? 😂
The supra’s turbo is just insane when it kicks in. Truly a beautiful engine
Toyota supra = best flowing engine = alsmot ever ! 2jz engine = i have seen them 12,000 - 14,000 rpm = stupidly spinning what a great 6 cylinder !
This is what happens when you try to get v8 power out of a 4 cylinder
tronarat so true mate 👍
could not have said better my self
No this is what happens when you don't know the correct equation for cfm metal stress timing and fuel
Bolt ons...
@@beaumontlivingston8084 thats because you are dealing with kids LITTLE BOYS
Each one was so funny!
This, my friend is the reason that, if I ever own a car, I will never ever put it on a dyno.
I remember my first beer.
10:40 SUPER ECOLOGY TRUCK
Because... I want to see how fast my car is whilst parked in a garage...
My point exactly.
smh, gotta tune your car first egghead, otherwise youll waste money blowing engines. Better it blow up on the dyno, than leave you stranded in the middle of no where.
@@DGOfTheCentury - Sounds like you’re doubling down on the stupidity. Two places I wouldn’t want to blow my engine up...? 1. In a garage. 2. The middle of no where? Again... Why?
Don't forget the morons who destroyed their engines in a parking lot at a car show
@Mr. Happy bruh i was thinking the same thing!! My brain almost crashed trying to read what he said. 🤦🏽♂️🤦🏽♂️
Despite the IDIOCY of the people standing around...
This is actually a good advertisement for 2J-ZEDs!!! 😜
Impeller Wheel implosions, Intake Tube rupture, Turbo Housing explosions, Tire explosions....
But nothing to do with the basic Block!!
8:49
Unfortunately it didn't fall on the other side 🤣
"PAPPA!!" lmao gets me every time😂
8:22 is the best. 🤣🤣
MARK DUNCAN probably did not need to be on a dyno. 😉
Zooooooom.... POW!!! Hahahahahha, I like this very much.
You couldnt pay me to stand behind the tires of a car on a dyno
Thank you TurboAndStance
Can we take a moment to think about how a 2J turbo blew up before the engine itself.
0:50 driving shitty overstretched tyres. You got Power, You need good Tires.
I’m starting to think that dynos, stock blocks, and nitrous don’t mix well
1.55 santa claus on his day off.
I was just thinking how stupid it was to have all those people right next to the dyno rollers, and...
Just blew up the b58 in my supra on the dyno trying to make 700hp.. watching these videos so I don't feel so bad.
1:96 hahaha ha swiped his foot right out from underneath him lmfao
Not surprised at all when you put a Honda or a Ford on a Dyno machine!
"Hey finance company, you'll never believe what happened to your car."
Show me the CarFax!
Even my motorcycle dyno tuner has 2 fans going at once, some of these guys have 1 or none.
6:00 that turbo couldn't handle the Supra.
Get a load of this guy
ha?
Without the turbo it’s nothing
Just dynoing and BOOM the engine explodes
6:11 Love the Demo description.
Okay so every vid I see like this you can literally hear the engine cutting during accel. That should be your first sign to just stop and not push it.
Tuners are like blue tooth speakers for you phone, a waste of time and money trying to imitate old school.
Ah the anticipation of the Big Powah!
I think like half of these would have been prevented if they just used the right tires and/or straps.
If I had wanted to sit atop an IED I would have gone to Iraq.
What?
They were sitting on it to stop the wheels from slipping
@@Martin-xh1hd lol he dumb
I know what you mean.. stupid to be so close to so many moving parts, one of any number of things fail and hit you and you may be dead.. piston, rod, tire, drive shaft or ujoints, turbo, cooling fan, and many more..
Amen
The rods done left the building. Open wide, say ahh, how much is this going to cost?😞
In my humble opinion there is no need for a Dino. The only reason ‘most” people get one is so they can show off how much horse power their vehicle makes. Those who truly race are a doing it to get the absolute most out of their vehicle, but honestly the rest will never use no where close to the power that their vehicle makes.
I use to put semi's on dyno lots of chain downing and exhaust fan systems. New ones are fun when the paint burns off the exhaust manifold starting fires at times
One I remember had it up to 130 mph, can't imagine towing a trailer behind that rig and where it would happen. Guess out west on long straight highway
That guy in #3 went down like a bag of dirt.
That E30 literally made me cry 😢
1:40-What kind of business allows this spectator crowd access to the test room DURING TESTS.?
3:04-The alpha idiots.
4:14-Vanity tag showing drivers IQ=3.4
I just love how they keep dynoing the black car.. what do you thinks gonna happen..
Terri Webb, let me see? Eventually it’ll be great for the 4th of July fireworks display!
2:39 sounds like a Detroit 6v71 bus engine from 1976.
Ikr
All it took was seeing a camshaft fail on a dyno for me not to be very near one ever again, it's your choice and some people here are way too close.
hey dad i had a small problem with your car today i was just driving along & i heard a funny noise under the hood
Then opens the engine bay finds no engine like 8.20
First, you air the tires to max pressure shown on the sidewall. Then you run on the dy no for 2 minutes, then you give the tires a 30 minute cool down before you run it again. Anyone that owns a chassis Dino should know this.
first video you see the hose pop.off like hello goodbye my old friend
The reason dynos go wrong is due to incompetence and lack of maintenance on both the customer's and tuner's part. If I want my car dyno tuned I would have not used NOS, a big turbo which results in too much boost, or wrong oil or coolant
I bought an EBay hot air intake and a K&N sticker for my car. That should give me like 10hp for the intake and 50 for the sticker. Lol
Dude you got 769 horse and 3 dudes power...that'll shred the tires.
At least the black Supra only had a tire blown. Better that than the engine or transmission.
Or a wheel falling off, driveline snapping, turbocharger flying off, etc.