How To Original OG Xbox Capacitor Replacement Upgrade HDD Thermal Past Ide to Sata 80wire
Vložit
- čas přidán 1. 08. 2024
- Please Watch the entire video...LOTS OF TIPS AND tricks !!!
Plz subscribe to the channel and plz give me a like for all my hard work!!
sorry about the annoying buzzing sound in the background that is the sound of the oscillating fan I have in the room. It was a very hot day and I needed this in order to get this work done
this video is meant to help people who need information on these topics. That being said ...Any work done on your Xbox... YOU are responsible for .. be absolutely sure to research whatever it is you're trying to do before you attempt anything...
in this video you will see a whole bunch of different things related to the original Xbox such as capacitor replacement. Ultra ATA 80 conductive wire upgrade. On Aladdin XT modchip installed on 1.4 Xbox. Upgraded hard drive 500gb Western Digital blue. is well as Aladdin XT flashing with executor to bios. And you get to see emulationstation up and running. this Xbox is not in the best condition. The case had a couple cracks on top but I think it has more sentimental value to the owner. I'm glad I was able to fix it up for him it's looking very very good video quality looks excellent as well. That being said at the end of the video you can see the Xbox2HDMI wire that I've made running on this version 1.4 in 1080i. The image looks amazing. This adapter does not use any external power and still looks great.
if you would like to make your own Xbox to HDMI adapter you can follow this tutorial video I've made a little while ago here is the CZcams link
• How To Make $5 D.I.Y O...
I use a number of different tools and supplies in order to do this. I will link a few of them here. These are just recommendations you can buy them anywhere is best for you. I always say support your local businesses
Replacement capacitors 6.3 volt at 3300 microfarad
rover.ebay.com/rover/0/0/0?mp...
IDE to SATA adapter
rover.ebay.com/rover/0/0/0?mp...
40 pin 80 conductive IDE cable
rover.ebay.com/rover/0/0/0?mp...
Soldering flux pen
rover.ebay.com/rover/0/0/0?mp...
60/40 solder
rover.ebay.com/rover/0/0/0?mp...
Thermal paste compound
rover.ebay.com/rover/0/0/0?mp...
Small side cutters
rover.ebay.com/rover/0/0/0?mp...
I just want to say thank you everybody who actually watch this video. I hope you have learned something...
thank you very much for all the support. Greatly appreciated
Pro Frank
#XboxModding #OGXbox #OriginalXbox - Hry
I loved every minute watching this video! The way you teach us how to do these things in such a friendly manner is amazing! Subscribed!
You know, you make your videos like you're talking to a friend. I think its really nice and feels personal.
Well, that is very nice to say. Thank you very much. . I'm glad you enjoyed the video. :-)
I agree, I'm in England and I'd take him for a pint or 12.
My words exactly. It must be the friendly Canadian way ehy?
This really helped me, thanks for going into so much detail. This is probably the best video for moding and restoring an original Xbox!
i was impressed that microsoft put a western digital caviar inside the console,"caviar black" was the top hard drivers from western digital,I am currently not aware of the models but at that time they were good and expensive.
First video I've seen from this guy but wow is he good! Thorough and informative. Well done!
Thank you broski...
Alot more to injoy!
Have a look at some old videos bro
Thanks again !
What I do is just let the Xbox run for about 10 minutes, then unplug it and hold down the power button for 10 seconds to discharge any current left then remove the heatsinks. They usually come off butter smooth while the chips are still warm. That way there's no risk of damage.
Yes sir you're 100% correct. But I didn't have time show this in the video
I bought one Xbox V1.4 and had the same problem, the capacitors, thermic grease... And bought chip Aladdin as well and now going fantastic. Thanks so much for your video. Best regards
Wow awesome comment do me a favour subscribe to the channel give a lot of Thumbs Up and share the video as much as you can. It would be greatly appreciated it helps out the algorithm. Thanks again
Watched it all Frank, very informative. Will be setting up m retro games room son in our new house and my Xboxes will need some work I'm sure.
Never done an thing like this before but with your guidance I will hopefully be fine , thanks.
Will now watch some of your other content, and have subbed.
I love it. No bullshit. No flash. Great job
I like good ol' Frank. He's like a buddy talking to ya while he's working on some old school electronics. Thanks Frank!
Thats awesome .... thanks bro 😁
Video helped a ton with my own capacitor replacement. Very detailed and easy to follow!
Who the hell down votes an instructional video put out to help others??? Great job as usual, Frank!
Lol.. world is full of haters. People need to try to replace hate with love the world would be a better place
I learned to repair an Xbox now. Thanks a lot for this new skill
Im watching this video and it making me highly motivated to attempt this on my own XBox (1.2). You did a wonderful job with this! Thank you for making this and sharing it!
Cool beans bro
Excellent work, Frank! Great video and narration. Super informative.
Wowzers thank you very much very nice comment. If you enjoy this video please take a look at some of my other videos If you go to my channel you will see a playlist section. If you click on the playlist icon. You will see all the playlist I've created I've created one titled OG Xbox. If interested of learning more about the OG Xbox you can take a look at some of those videos. Thanks again don't forget to subscribe and thumbs up for my hard work :-)
Glad I found this video. I have 3 Xbox OGs I use for streaming music. Now I know how to extend their life. 👍
Great video. Helped me save my 1.6b xbox. Funny thing is that the caps that you replaced looked fine but the clock cap was bulging. I replaced it... 1 farad at 2.7v. Then turned it on...and the 3300uf caps you replaced blew. Guess they were old. Replaced them. To get the heat sink gunk off the cpu/gpu and heat sinks...I used acetone. (aka nail polish remover). Still waiting on caps. Thanks for the video!!
Replacing the capacitors and then XBox isn't only needed when they blow. This should be changed every 5 to 10 years at the maximum. Depending on how much it's used not only that but good clean capacitors will strengthen up your signal making the image look a lot clearer could clear up any fuzziness in the video picture as well. All in all it's a great practice to do anytime I get an Xbox in my hands
This "black tar" / "thermal paste" is actually a phase change material pad (it gets softer when heated up) which still works well on most of these consoles unless they've gone through an extreme amount of power cycles. This is why most OG Xbox units have a very minimal temperature change (if any) when changing the PCM to a thermal paste.
Thanks! I manage to install new caps because of this video :)
For the era I grew up watching. My favorite wrestler is a toss up between Taker and RVD. Very cool video, see ya here in the future.
Thanks for coming
I like to consider myself old hand, but I really appreciated the run through and the details you added. Really good job, i'm going to go check the rest of your channel after this one!
Thank u friend ✌
Your videos are awesome! Thank you!
Good video man. I'm always looking for original Xbox videos and I've found very few that talk about cap replacements.
@@dennisanderson8663 While some people only replace what is broken, I like to do complete refurbishing of items so I can use it without worrying. Yes, it's more work, but it's not expensive and if you're experienced then it doesn't take up too much time
@@kevin1337ninja do you happen to know what all the caps that you replaced?
@@lamar9525 I replaced all of them on my 1.0 MB.
@@kevin1337ninja Sweet, thank you for your help & time.
@@lamar9525 Is there a specific reason you're asking?
This video is awesome!!! Thank you!!’
I have two of those Philips DVD drives for the original Microsoft Xbox I fixed three original Microsoft Xbox consoles I bought off eBay I cleaned fixed inspected refurbished repaired restored reapplied new fresh thermal paste and all three work excellent
For Cool Paste, I normaly go with about rice grain size, then put the heat sink on, let it sit a moment, then take it off turn 180 degrees and reset it, and then put on the clamps.
Until now no problem with that at all
runs cool and nice
the clock capacitor had been removed already but the 1.4 mostly had the gold clock capacitors on which are good quality and don't leak, if that's the case it wouldn't've needed removing
Yeah I remember not screwing down on the the motherboard screws enough and I was hearing static but my phone couldn't pick it up but I tightened the screwed and no more static so it ended up being a ground issue
I used a smaller laptop ssd with a caddy. It produces 2 degrees less heat and it helps airflow. SSD's are so cheap nowadays. The ssd technology is good now that the wearing out problem should not be an issue I hope. And I used the red startech adapter.
Thanks for the great video, have 2 Xbox consoles to work on, tips appreciated. Fav early 80s wrestler is tough pick.. Macho Man Randy Savage!
excellent video - really made me feel like it’s something that I could do. favorite old school wrestler, Ric Flair. Woooooooooo!!
Thank you for watching to the end that's awesome I love seeing people tell me their favorite wrestlers:-) I'm glad you enjoyed the video
a cool video for a cool console
Hi, what are those smaller capacitors you are using, I need to replace mine, but cant find hd y4 1500 6.3v anywhere
Great job real pro
Very good video, clear explanation makes it seem easy to do. I feel encouraged to give it a go with my old XBox. Subscribed to the channel. I am still looking at some way to replace the original DVD drive which is apparently dead. Is there any way to replace it ?
Not really best suggestion is to find a donor Xbox
No Techno music playing, check. The Guy (you) talking normal language, check. A couple of sweet tips nobody tells you forever, check. Awesome, subscribed and liked.
Thank you very much my friend I hope you enjoy this video please take a look at some of my other videos I know I have not been active to lately I've been doing other tasks and with covid-19. Things are difficult. But should get back to normal shortly. You should discover some of my playlist of my older content still great information lies there
lol wholly thermal paste batman! Excellent work bub. Thumbs and sub, peace be with you :-)
Hey frank love your videos. Just wondering what to do next. 1.6 and 1.2 xbox softmodded long time ago. Last week installed the alladin modchip in both. What do i do next. Use hexen dvd and install reg dash or remove softmod dash or flash the chip then install new dash. Dont want to loose stuff allready on the drive. Thanks for help or whoever else does
if you want to do things on the cheap then use IPA. ( rubbing alcohol.). it takes like 3 minutes to clean it up and it will not leave any residue behind.
ware did you get the image from please . keep up all the good videos you are making
Less then 5mins in "Kapooch, monkey business, bob's your uncle"....Yeah I'm in the right place.
Awesome
Excellent video!
I've got three modded OG's, and the soft-modded one has the header soldered in but no mod chip. My original one from back in the day with its Xecuter mod chip, and two from eBay that were modded. When I saw the bare header on a modded xBox I figured that was what was going on (someone installed a mod chip to do the mod and then removed it).
The hard-modded one from eBay is a bit of a head scratcher. It has a X-DU mod chip, a sticker in the center of the bottom of the case in Japanese? Chinese? Korean? as well as English. At first I didn't think it was from Japan since the sticker states that its operating voltage is 220 - 240 volts and Japan is 100 volts.
But installed on the hard drive is a video clip that plays upon bootup of a cute Asian girl modelling on a set with an announcer speaking what sounds to be Japanese, and emulators that include games that expressly forbid their distribution in North America, and others that are only in Japanese.
I will take exception to installing electrolytic capacitors *backwards* making them go pop. The v3.1 040 CPU board on an Amiga 4000 has not one, but three caps installed backwards from the factory. They rarely cause a problem, most A4000 owners don't even realize it. Only worth fixing when doing a full cap overhaul of the board. That's not to say it's a good idea to install caps backwards, and I fixed my caps on my A4000.
As for wrestling, we would have to go back to the late 60's early 70's for me. :)
*Forgot to specify. :)
So George The Animal Steele?
@@Retroprofrank I had a favorite, who I've forgotten his name. But he worked out with a beer keg. My kind of guy. :)
Muito bom!!
obrigado !
Hey Frank Great Tutorial!! And for me it was the Animal and BAM BAM Bigalo!! Also had two questions. Where do you find that Hexen Tool? & When I download the Homebrew games, in what folder do I put them in for the Emustation?
You can put them in the port section. Where you from?
@@Retroprofrank I am from NYC but live in Phoenix AZ now. Thanks for getting back to me so quick. Yeah I ended making a Homebrew Folder on the F Drive. Did not know that there was a Port Folder. I will check it tonight. ........Also shot out to Ted DiBiase and Mr. Perfect (Favorite Bad Guys)
Very informative video!!! Thank you so much for that! I was curious I have the Halo console and it turns on and everything but it won’t play games... It’ll try, blink green the whole time and then give up! Do you think I need a new hard drive or just to replace the capacitors? I’m waiting on some thermal paste to open it up. I don’t have a soldering iron though unfortunately so all I can do is remove the clock one for now and clean up any mess it made.
It's definitely worth trying could be a number of different things could also be power supply hard drive you have to use the process of elimination.. I would recommend buying a solder kit on eBay something that comes with a practice board in order to teach you how to solder make sure you use flux and take your time make sure you properly ventilate as well because you can get sick from the vapours.. good luck
@@Retroprofrank thank you so much for that info!!! I’m gonna try today, I’ll let you know how it goes!! And I have a whole cart full of soldering tools and supplies and a good idea how, just need the money to pull the trigger but soon!!! :) thanks again!!!
@@RickRickiGames make sure you practice practice practice. Before you do anything that requires a lot of skill. Grab yourself a used VCR for $2 from I used electronics store take it apart start taking off components one at a time using your soldering iron and putting them back on good way to practice. Make sure to always use flux
@@Retroprofrank that’s a great idea!!! Thanks!!! Will do!!
Jimmy Fly Snukum is my favorite wrestler
Amazing, heaven sent video Frank! I have this same Halo Edition Xbox and the hdd just died. I bought the Aladdin chip to install a 1TB SATA drive so I can save my prized green jewel. QUESTION: How did you ground the D0 for this 1.4 version board, from D0 point on the motherboard to the D0 pad on the Aladdin chip or to another point on the motherboard? That's the only thing I didn't see in your incredibly thorough video.
D0 from the motherboard straight to ground... this will make the chip turn on all times
@@Retroprofrank Which ground? Sorry Frank, I'm a noob and a lil confused by what I've read in the Aladdin install guide. Xbox V 1.6 wants the D0 wired to the screw plate, so I want to be sure I'm getting this right on mine.
@@zdigital13a if you're modding a version 1.6 this guide this video is for you if it's a 1.4 it's not. Everything you do is at your own risk so make sure you research as much as you possibly can
@@Retroprofrank Thanks for the Reply brother. Sorry to impose. Your videos are great, so I had to ask. You are LITERALLY the only guy who has mod chipped a V1.4 on CZcams. Just wish the vid had shown you doing the D0 to ground connection. I'm on OGXBOX Reddit now trying to get clarification. One guy told me he doesn't ground the D0 at all. He just bndges the BT and BAM! He's done. Lol
That's the exact same motherboard that i got recently, i was trying to clean it up. But the amount of dirt that has built on this, it's almost impossible to clean it off.
So i wonder, what is the best solution to safely clean it? I tried alcohol and toothbrush, but it just seems to smudge the dirt rather than remove it.
I don't have an air compressor.
You can go to the Dollar Store and get yourself a dollar store paint brush. Bring the motherboard and the casing outside in the backyard go over the motherboard gently with the paintbrush. Make sure the paint brushes dry and clean. This is a good way and a lot cheaper than using compressed air
Brett hart period
I noticed that the clock capacitor was removed. Do you recommend putting a fresh one in, or is it unnecessary to replace? Please let me know. Thanks.
I just pulled it out not necessary to replace. Unless you truly care about the clock on your unit. You want to replace if it's a 1.6 because if you remove it will never work on 1.6
Hello frank and very good evening to you I left you a comment on your video to do with the Aladdin chip 1.6
In reference to that once it’s been all sorted installed ect
Can the Xbox play ps1 one games back up disc ect
I want to do it with an Xbox I am looking to get soon want all the old retro games along with the old ps1 games
Hope to hear from you 👍🏼👍🏼👍🏼
funny I wrote up a big article about this.. cannot emulate or play PS1 discs. However there are a handful of PS1 games that do play very well on the original Xbox through emulation. There is a list of about 50-70 PS1 games that run very smooth. I do not have this list available however
Quick question, my xbox has an Xecuter chip so it's hard modded. But it is possible to still be able to reset the entire evox/whatever menu i choose? Like entirely reset the whole flashing process since all the menus and apps in that xbox are completely messed up and don't work. As well as the stock Xbox menu.
There's no simple answer to this my friend yes you can reset but this will wipe everything. My best suggestion emis to search Google and Reddit pages. This would take me hours to explain to do step-by-step and really do not have the time right now there is no simple answer to this. If this is something that you want to pursue looks like you have a lot of researching to do my friend. Thank you
@@Retroprofrank OH that sucks. Even if it wipes everything which im okay with. Still not easy?
how hot do you heat the soldering gun to remove the caps? I’m not experienced in soldering xD thanks
I recommend you practice before you do anything in screw up your Xbox. You should be watching videos on CZcams on how to solder once you get the technique down come back to this video
Very calm the way you talk, so it`s easy to follow! Where did you get your xbox2hdmi device?
I made it other people in the communities posted pictures first of them doing the same thing when I asked for any sort of schematic nobody was helping me. There might have been something online but couldn't find anything I had to decode all the connections it took me two days to do so. Made my own schematic it is in the description section of the video you can download it. Thanks again for your kind words
I have an 1.6 xbox alladdin modded; can i do the same to erase the modded bios like you are doing in the min 56:26 ?
Yes you can but like everything you modify is done at your own risk. If you do not flush the proper bios you can brick your system entirely
Okay, one question I have to ask since this video brings it up.
I've been trying to upgrade the ide cable on my xbox consoles readily, and failing every time. Why? because the dang key on the connector is always in the opposite direction. The only way I can fit it with the key(s) in place is forcibly stacking the drives and putting most of it underneath the dvd drive. I even tried (while Fry's electronics was still around) to make a cable myself, and failed miserably. HOW and where do you get the cables that will work?! Can you even get them anymore?
It needs to be an 80 conductive wire that's the only way
www.amazon.ca/dp/B07M5R6FHR/ref=cm_sw_r_cp_apa_glt_i_5T6Z8XSKHH1D4YMWMNBM
@@Retroprofrank Granted I'm in the States. But, is that one keyed correctly? Because like, i have a box of ide ribbon and rounded cables on hand, and I've found one trend: every single cable that didn't comr from an Xbox console, is keyed the wrong way. Which means I can't use any of them in any of my consoles.
@@ZeroHourProductions407 all you need to do is make sure whichever one you purchase is an 80 conductive Cable ultra speed
hi Frank is there any way you can send me a copy of the hexen 19. thanks
I want the way to make the update disk, my friend
What about the clock capacitor? Do you have a good replacement to recommend?
Edit: favorite wrestler was Hulk Hogan when I was a kid.
As long as the microfarads are the same you can go with any supplier you see fit
@@Retroprofrank ok great! Thanks for the reply.
Why no more videos? 😢
Quick question lol where do the blue screws belong? I simply waited too long to put it back together and I can’t remember where they go lol
Blue screws? I don't remember seeing any blue screws
@@Retroprofrank they’re the same as all the screws just a bit shorter and blue where it screws in
@@RickRickiGames the blue you're seeing is called removable Loctite this is put on the threads so that the vibrations will not unscrew the screws. There are two different types of Loctite there's a permanent kind and then there's a removable kind. These hold the hard drive in place
@@Retroprofrank thank you so much!!! You’ve been extremely helpful in this process!!
Where did you get that ide cable from?
You got to be resourceful my friend you can try eBay. Maybe amazon. Or maybe some old computer stores that you have known have been around your area for many years. You can find it
Xbox wrestler? I love it!! I actually can’t stand wrestling, so I don’t have a favorite.
I don't like wrestling either. But some of the older stuff was okay like Macho Man Randy Savage. Brutus The Barber Beefcake Jake the Snake Roberts the classic characters to be honest I actually met Jake the Snake Roberts twice. And I actually met Hacksaw Jim Duggan.. They both signed my NES WWF games..lol.. for a $20 fee of course :-) they go for making thousands in an hour to signing autographs for 20 bucks a pop hilarious. Thanks for watching bro
Do you know if this mod chip can support a small LCD screen?
Some of them do this in particular one do not if you're looking for an aladdin chip that has LCD support you have to look for the older original ones which are now to find
@@Retroprofrank I was wondering why the new ones look different. was hoping to find a older one has that option
@@1775bobcat because the new ones are clones of the original.. good luck trying to find original
J Y D for the win! For all you young ones that's the Junk Yard Dog! ;-)
Lol... Coco beware
@@Retroprofrank Hey Frank, I just picked up a Canadian Crystal Xbox (St Catherines guy) and it's been soft modded. I've been watching your vids (they have really helped me with my modding) and want to make this puppy hard modded to easily swap out hard drives and the other perks. What do you recommend I do?
@@EngieDerek blue led port mod
So... Is it possible to fry your hard drive by pushing the adapter in too far?
If you watching the video I use double-sided tape so this does not happen
@@Retroprofrank that's pretty much what i did. Thanks for replying though. Your videos have been super helpful
Hi @Retro Pro Frank, I have an original Xbox V1.6 not modded ( I would like to mod it though ). But every time I turn it on it comes up with an error code 07. How do I go about this issue. Please help me out Sir.
Sounds like the hard drives that install a mod chip and installed a new hard drive. Or just buy one already modded and throw that in the garbage up to you
Retro Pro Frank thanks for replying Sir. So throw away the hard drive
@@rocketeerupupherewego7532 you need a mod chip and hdd
Retro Pro Frank I don’t have the knowledge. Will you be making a future video about my situation, it will help others too if you do
Retro Pro Frank BTW you’re the only one that has replied to my questions???? Meaning that I will only follow you from now on???? Thank you so far....
can you remove a tsop flash and install a aladdin xt instead or is a tsop the same as haveing a modchip
Okay the first part of your question I do not understand second part yes a mod chip is like tsop
@@Retroprofrank do you need a mod chip if you already tsoped your xbox and can you remove a tsop and put the orignal bios on the bios chip
@@jaymooreiv8769 no you don't need a chip if you're already tsop... if you have a chip you can remove it and go back to original bios
how do you go back to the original bios if I want to remove my tsop
and I have a muppet x mod chip
Did you add all those games to it or did they come with the emu?
I made the built-from-scratch took me quite a long time
@@Retroprofrank Do you have a video on how you added them?
@@wildblueenergy it would be more like a 10 video series. And I'm not about to start doing that paper project right now
@@Retroprofrank Lol Got ya. Is the process like the FTP transfer of games? Thanks for the info by the way.
the alcohol will remove the paste on its own without all the goo gone steps i just give it a spray hit it with a small paint brush and finish off with a alcohol soaked micro fiber cloth ... much quicker
I don't know man I've tried alcohol originally it's a lot difficult takes a lot longer and you have to scrub the hell out of it googoon instantly melted ..I find this faster
Yes please do some FYI videos
What do you mean? What kind of FYI
Retro Pro Frank new videos
Why didnt you replace the clock cap ?
Kind of a waste. If I replace it it's only going to go again better just to remove entirely
Yes but I hate the clock not being correct , the only work around is having a Ethernet cable always connected for the time. You replaced 6 so what’s one more !
@@HackDaBox I'm not putting another ticking Time Bomb back in the Xbox. It's removed the Xbox is safe... you know how many Xbox I've seen with Trace rot damage that needed repair just to turn on because of that? The average person doesn't know how to fix that. As long as it's removed that's all that mattered
Are you able to fix controllers
That gives me a good idea I should make a video on controller repair
@@Retroprofrank Please do! I have a controller with some sticky buttons that I'd love to fix.
@@loadedsociety if it's got sticky buttons that's an easy fix just take the 7 screws out of the back. Disassemble the controller and clean the rubber behind the buttons
Where all 6 capacitors you removed the same 6.3v?
Every capacitor ever made has the values written on the side
Rowdy Roddy Piper
Hahaha he was sick in the movie "thay live"
I came here today to chew bubblegum and kick a$$ and im all out of bubblegum,classic@@Retroprofrank
why not tsop?
For the heatsinks its best to just run the machine for less then a minute.
use alcohol might as well do whole board and heatsinks
It's been shown a lot of the time don't even need to replace thermal paste it makes no difference
He wanted a chip bro
@@Retroprofrank still good to have both
اريد طريقه عمل قرص التحديث يا صديقي
Dan Aykroyd fixes an XBOX
Hahahahah who is Dan Aykroyd..hahah I ain't afraid of no ghost..hahah
Isopropyl Alcohol
For all of this. Even cheaper than Goo Gone. No residue. And safe with electronics.
Obviously you weren't paying enough attention when I was saying to go over it with Goo Gone to break it up nice and quick then to go over it with isopropyl alcohol to clean up any residue.
Ah, Arctic Silver 5. My personal fav thermal paste.
While AS5 is still a good thermal paste, there's "much" better options available nowadays, MX4 if you wanna stick with Artic has no curing time, is not conductive (no silver in it) and has better thermal transfers, but other brands may even be better (noctua often provides its own thermal paste NH-1 something) ;)
If you have AS5 at hands, then use it, if you need to buy thermal paste, check "the best thermal paste 2020" in google before making a purchase.
Mankind.
Razor Ramon
Me 2 broski...hahahah
12:26 - OMG! LMFAO!!!!!!!!! DO NOT USE GO GONE! HAHAHAHAHAHA!
Isopropyl alcohol 70-91%, some wipes, and Scrub.
@@Olie956 personally I don't see how using a very tiny bit would destroy it but it is always possible that you could do so. I highly don't recommend doing it the way he does in the video that is for sure, just a very tiny bit on your finger and spread it around. Shortly after clean it all off with 99% isopropyl alcohol.
I hear now you can t Flash them
?? Can't flash what?
The Aladdin chip
@@lacey397 sure thay can be flashed if you know what you're doing... in fact I show it in the video where I install an aladdin chip. Look through my recent videos you'll find it. Proof is in the pudding
somebody told me that I really didn't believe them
@@lacey397 can be reflashed with any 256kb bios
Bret Hart. ;))
The Hart Foundation classic
Sting