Thank you so much for such a well done presentation! You answered several questions for me that I haven’t beeb able to find elsewhere. I’m subscribing!
I use a air sense 11. I get along with it and like it. It’s not a very well designed machine. The hose port is at the back of the machine. My hose would tangle and fall to the floor pulling on the mask causing a leak. Turn the machine around with hose port facing the bed. This also puts the water chamber to the front. It puts your touch screen to the rear. No more tangled hose. Seems like they were more concerned about a touch screen than sleep ability
I have an airsense 10. What I have always done for ANY machine (this is only my third one in about 13 years) is to use velcro zip ties and hose management clips to secure the hose to the bed with a bit of slack between the machine and the secured point on my bed so that as I roll from left to right, I'm not going to pull on the machine and will instead pull on the secured point on the bed. As for my mask end, I have yet more velcro zip ties (I also have a fleece tube cover) on my hose setup with a pacifier "leash" so that there's no tension put on my mask that is on me.
I think I’m doing a good job putting mask on. No matter what I do the mask won’t seal. It stops after a few seconds, or minutes. I’ve tried the full face, and the nose pillow mask. Nothing works. Please help. Ty
Last night was only my second night using it. I seem to always get a sad face by mask seal after I take it off to go to the bathroom and then put it back on when I come back. So I don't know what I'm doing wrong
On attaching Climate line air the machine recognises the line is connected . When I start the machine after approximately 5 seconds it flashes up High Leak detected Connect tube . Can’t see why it’s leaking Machine is P10
I've only been using my cpap resmed 10 for 2 days. Last night I when I went bed the happy was by the mask seal but I woke up at 6 to use the bathroom and went to put the mask back on and the mask seal was sad. I do feel the air in my nose. So how do I fix it to be happy. It's on as tight as it can be. What am I foing wrong. I also did the mask seal test and it says it's good.
This will depend on why you started CPAP in the first place, and so you must consult your sleep therapist or doctor. Generally, though if you are no longer having apneas, you can lower the pressure gradually and eventually stop using CPAP all together. However, having a low AHI may also just mean that CPAP therapy is working well, and without it you would have apneas again. This is a case by case basis though, so seeking proper medical advice is required.
I've had a high leakage since I got my new air sense 11 2 weeks ago. According to the video you should be able to rese the pressure but it won't let me. Any suggests?
AHI is the number of apneas or hypopneas (times when you stop breathing) you have within a 1 hour time frame. So a good AHI (eg. 3), means that within 1 hour you only experienced 3 apneas. AHI does not take into account the quantity of oxygen delivered.
I'm new to cpap therapy. I've only had my full mask for a month the seal is leaking terrible. I had to change it way before 3 months. I just ordered a different type of mask for side sleepers. Fingers crossed that this mask won't make all of those leaking noises.
Is that how you change the Air pressure on Airsense 10? Pressing both buttons? Mine was locked by provider and pressure is too high. No time get new prescription from Dr Thx
What's going to happen when the doctor finds out you lowered his prescribed pressure? He got the pressure from what you showed you needed during the sleep study. Sounds like the old "I don't like the taste of it, so I'm not taking my medicine." My pressure is at 23, very high.
Could be a number of things. Meds that suppress your communication between your brain and diaphragm, the number of AHIs might be low but the amount of time between stopping breathing and starting again might be too long (this was the reason I was diagnosed with sleep apnea, specifically central sleep apnea secondary to dysautonomia) for your brain to compensate for, or you might just need a bit more sleep. Of course, there could be reasons from an endocrine standpoint for your sleepiness such as blood sugar levels being out of wack, issues somewhere along the HPA (hypothalamus, pituitary and adrenal glands) axis, issues with your thyroid levels. However, there is also the aspect of your circadian rhythm aka sleep wake cycles (think average person is on a 24 hour circadian rhythm but you might be running on a 20 hour circadian rhythm meaning that you need to get to sleep earlier and earlier each day and wake earlier and earlier because while a day has 24hrs, your body or rather brain, is running on a 20 hour clock for its full day). Of course, these are all things that you have to investigate with your medical providers and not be seeking answers for it on social media...... best of luck.
If you are using the CPAP function, then it will go up to the set pressure. Eg. If you set your pressure to 12, it will test at 12. If you are using it for APAP it will test in the high mid-range of what you set. If you set between 4-15, it will test around a level 10.
Why do they make them so challenging to use
Thank you so much for such a well done presentation! You answered several questions for me that I haven’t beeb able to find elsewhere. I’m subscribing!
They need to make the water reservoir larger
just lower the humidity level to like a 1 or 2 and keep your temp at wherever you feel need it to be.
I use a air sense 11. I get along with it and like it. It’s not a very well designed machine. The hose port is at the back of the machine. My hose would tangle and fall to the floor pulling on the mask causing a leak. Turn the machine around with hose port facing the bed. This also puts the water chamber to the front. It puts your touch screen to the rear. No more tangled hose. Seems like they were more concerned about a touch screen than sleep ability
I have an airsense 10. What I have always done for ANY machine (this is only my third one in about 13 years) is to use velcro zip ties and hose management clips to secure the hose to the bed with a bit of slack between the machine and the secured point on my bed so that as I roll from left to right, I'm not going to pull on the machine and will instead pull on the secured point on the bed. As for my mask end, I have yet more velcro zip ties (I also have a fleece tube cover) on my hose setup with a pacifier "leash" so that there's no tension put on my mask that is on me.
Thanks never thought of that
I bought a $4 3M hook to put behind my bed to hold the hose up. It no longer gets in my way at night. Maybe try that?
Thank you. I’ll try ideas
Can you show how to make these adjustments on the Air Sense 10?
Hold down the home and selector dials for 3-5 seconds and it will go into the clinical menu.
czcams.com/video/VNUWhd2UgQM/video.html
I think I’m doing a good job putting mask on. No matter what I do the mask won’t seal. It stops after a few seconds, or minutes. I’ve tried the full face, and the nose pillow mask. Nothing works. Please help. Ty
Interesting information. Thanks a lot.
Contact Us Directly for information about ResMed AirSense 11
DEAL OF THE MONTH - www.thecpapstore.ca/deals-of-the-month
Don't tighten down the straps. I get a better seal when its not tight in my nose.
Last night was only my second night using it. I seem to always get a sad face by mask seal after I take it off to go to the bathroom and then put it back on when I come back. So I don't know what I'm doing wrong
I should mention I have a full mask and use an resmed 10
On attaching Climate line air the machine recognises the line is connected . When I start the machine after approximately 5 seconds it flashes up High Leak detected Connect tube . Can’t see why it’s leaking Machine is P10
I've only been using my cpap resmed 10 for 2 days. Last night I when I went bed the happy was by the mask seal but I woke up at 6 to use the bathroom and went to put the mask back on and the mask seal was sad. I do feel the air in my nose. So how do I fix it to be happy. It's on as tight as it can be. What am I foing wrong. I also did the mask seal test and it says it's good.
If I am at AHI less than 1 95% of the time. Am I good now and don't need the cpap machine anymore?
This will depend on why you started CPAP in the first place, and so you must consult your sleep therapist or doctor. Generally, though if you are no longer having apneas, you can lower the pressure gradually and eventually stop using CPAP all together. However, having a low AHI may also just mean that CPAP therapy is working well, and without it you would have apneas again. This is a case by case basis though, so seeking proper medical advice is required.
I've had a high leakage since I got my new air sense 11 2 weeks ago. According to the video you should be able to rese the pressure but it won't let me. Any suggests?
accessing the clinical menu on the as 10 is a little different than the as11.
czcams.com/video/VNUWhd2UgQM/video.html
If you have a good AHI, does that mean you are having oxygen delivered to your body compared to if you have really bad apnea?
AHI is the number of apneas or hypopneas (times when you stop breathing) you have within a 1 hour time frame. So a good AHI (eg. 3), means that within 1 hour you only experienced 3 apneas. AHI does not take into account the quantity of oxygen delivered.
How best tell if the N20 pillow (mask) is the right size (Medium or large)? Large collapses (leaks) at he top after few hours... Thanks
Just used the Air11 for the first time. It said it leaked a lot. But it seems like the air is leaking from the hose attachment on top
worked fine first 2 nights sealed great then last night i fooled for an hour never would seal so i quit fooling with it
I'm new to cpap therapy. I've only had my full mask for a month the seal is leaking terrible. I had to change it way before 3 months. I just ordered a different type of mask for side sleepers. Fingers crossed that this mask won't make all of those leaking noises.
How do I stop getting eye leaks ?
Is that how you change the Air pressure on Airsense 10? Pressing both buttons? Mine was locked by provider and pressure is too high. No time get new prescription from Dr
Thx
What's going to happen when the doctor finds out you lowered his prescribed pressure? He got the pressure from what you showed you needed during the sleep study. Sounds like the old "I don't like the taste of it, so I'm not taking my medicine." My pressure is at 23, very high.
Switch to a BPAP maybe?
@@alive.-xn4fx I'm not familiar with the BPAP, but I use a Bipap AirCurve 10 now.
This maks can use with S10?
My AHI is lower than 5 with CPAP but still very sleepy. Why so
Could be a number of things. Meds that suppress your communication between your brain and diaphragm, the number of AHIs might be low but the amount of time between stopping breathing and starting again might be too long (this was the reason I was diagnosed with sleep apnea, specifically central sleep apnea secondary to dysautonomia) for your brain to compensate for, or you might just need a bit more sleep. Of course, there could be reasons from an endocrine standpoint for your sleepiness such as blood sugar levels being out of wack, issues somewhere along the HPA (hypothalamus, pituitary and adrenal glands) axis, issues with your thyroid levels. However, there is also the aspect of your circadian rhythm aka sleep wake cycles (think average person is on a 24 hour circadian rhythm but you might be running on a 20 hour circadian rhythm meaning that you need to get to sleep earlier and earlier each day and wake earlier and earlier because while a day has 24hrs, your body or rather brain, is running on a 20 hour clock for its full day).
Of course, these are all things that you have to investigate with your medical providers and not be seeking answers for it on social media...... best of luck.
When you do the mask leak test, what pressure does the airsense 11 use for the test?
If you are using the CPAP function, then it will go up to the set pressure. Eg. If you set your pressure to 12, it will test at 12. If you are using it for APAP it will test in the high mid-range of what you set. If you set between 4-15, it will test around a level 10.
@@thecpapstore Thanks
This video is about nasal mask! Change the title!
If you actually watch this video you’ll find it is applicable to any mask. This is the best explanations I have encountered. Well done 👍