Building FPV Drone. What does it look like?
Vložit
- čas přidán 2. 07. 2024
- Here we go! My first FPV Drone building video and it was satisfying. I hope you like it. And if you have any questions about this quad feel free to ask me in the comments.
Few words about this build:
This is 2.5" freestyle drone and it is also sub 250 gram
Frame: Quadmula F25 Djinn
Motors: T-motor F1404 2900KV
Flight Controller + ESC: GOKU F722 Pro Mini V2
Video: Walksnail Avatar HD Mini 1s Lite + HD V2 camera
Radio: Flywoo ELRS 2.4G EL24P Nano
Props: GEMFAN 2540 3-Blade
Batteries: GAONENG GNB LiHV 6S
0:00 Unpacking
0:28 Frame assembling
4:54 Motors
6:20 FC and ESC
12:03 Capacitor and power
15:20 Video system
16:20 Radio
18:11 Assembling
22:53 XT30 soldering
25:04 Final touch - Zábava
The heat shrink and wire mesh looks really clean 👌
Красава! Супер сборка и музыка сама концентрация - чуть в астрал не улетел.
You've made a little masterpiece 👍
Cool build video. You just got another subscriber.
Really nice build.. I watched from start to finish. I have several build videos and your was great. Loved the edit, I see the work that went in to it. Good show. I subbed up. Thanks. On my quadmulas I put the receiver under the main bottom plate inside the c lock area. Work great there. But I'm building f5 splits..
Thank you! That's an interesting place to put receiver on. Never thought about it
really good song choice i wasnt even high yet but i got stuck here for a bit just thinking about nothing but this
A Tip : Install your drone in this order : Stack -> AirUnit -> elrs/gps -> motors. This way motor cables won't get in the way and if you want to route cables below the esc, it will be easier to lift it since it won't be connected to the motors or anything.
Also : B U Y A S O L D E R F U M E E X T R A C T O R Y O U W I L L G E T L U N G C A N C E R
I love the video my friend 😎 I fly my djinn all the time love it , subbed
Thank you! And i love this quad. Really fun to fly
Thanks, for videos tutor , i like
I just got done repairing my Djinn. I have 1404 3000kv on 650mah 6S and it's a little beast to fly. To bad we can't put a self-powed buzzer on this
I'm using GNB 6s 380 and it is enough for 3-4 min freestyle
Heatshrink a vifly mini to the battery strap and run the wires down through the top plate. I did exactly that on my F3 and F35. You need a buzzer on those tiny quads, especially. It looks perfectly fine and I haven't had any trouble at all with it being on the outside of the quad.
i wish building a quad was actually this satisfying
FIT IN THE THE DAMN HOLE. WHY THE HELL WILL YOU NOT FIT AHHHHH
WHY IS THAT PAD BRIDGED, STOP BEING BRIDGED
DUDE WHY IS THIS MOTOR SPINNING BACKWARDS EVEN AFTER I TOLD YOU TO SPIN THE OTHER WAY
FLIPPING OSD WONT WORK NOW
HOLY CRAP DUDE I PUT PROPS ON BACKWARDS
ahh, it finally flys
*crashes into tree and repeats the entire proses*
That's literally me 😆
Gift for me❤
Can u send me a link to all the products
All the products names listed in the description. There is a lot of place there you can buy them. Depends on country there you live. That's why i didn't put any links
Can you fly it with flysky fs i6?
I don’t think Flysky FS-I6 compatible with ELRS. I have Radiomaster Zorro with built in ELRS for this and all other my drones
There is a mod to update the firmware on the i6 and you can use an external elrs module, but unless you already have an elrs module or You really like to tinker with stuff, I would not suggest that.
Get a proper elrs radio, preferably one with full size hall gimbals. I just ordered a jumper t20s to retire my fs i6 + radiomaster nano (elrs 3). I'm planning on keep modding my fs i6 just because is fun.
The modded fs i6 worked just fine to fly and gave me my first real experience flying, but now I want to have a proper radio with some more advanced features.
If you go the mod way you will save some money and learn some things along the way, but if you just want to fly you are gonna need to save some money.
Also what was the total cost of building??
This build cost me around 400 euro
@@SkiptaFPV Does that include the controller and goggles? What would an entire setup/everything you need to fly cost?
dont own a heat gun or wire strippers?
I'm thinking to get one. But for now i use lighter and knife.
Nice one. It's obvious you're getting inspiration from this guy's incredible custom build videos: czcams.com/video/cYLeu9a99Cs/video.html
NICE
Next time use a superior DJI 03 system
I have too many Walksnail units so not ready to switch to DJI
The way you use those box cutters is cringe, didnt your daddy ever tell you to cut away from yourself lol
Well, at least all the fingers are in the right place 😃
@@SkiptaFPV haha all g I'm only being a dick