4. How to adjust submersible pump tethered float switch
Vložit
- čas přidán 8. 11. 2016
- To order a pump for your DIY grey water project, email sales@greywaterdiy.co.za (South Africa) or click here to order from Amazon:
www.amazon.com/gp/product/B00...
How to adjust the submersible pump tethered float switch so that it switches the pump on and off and varying water levels, thereby catering for different shaped and sized water storage containers or tanks.
To order a pump for your DIY grey water project, email pump@greywaterdiy.xyz (South Africa) or click here to order from Amazon:
www.amazon.com/gp/product/B00... - Věda a technologie
Those of you waiting for a fifth video, I suspect that he was going to strap the arm half way down, like an elbow, around the pump so that the pivot point is lower. That will allow the pump to start and stop at lower levels and should decrease chances if getting obstructed by the pit walls.
Thank you sir!
The instructions that came with my sump pump were inadequate!
Now after watching your video!
IT WORKS ✅👍🏾🙋🏾♂️🥳
I can't find the video you mentioned about tweaking the float switch to run a little longer to drain more of the water out. Was it ever posted? I would really love to see the tutorial. Thanks for your help.
wonderful explanation how it works, thanks
Thank my pump is fix because of you
Very helpful thank you
RIP brother. 😢
You mention at the end of this video that you will share the solution to override the pump turning off before the water has been completed pumped out. Will you please share a link to this video that you mention? Thank you.
Still waiting for the fifth video
Excellent video. Please can you explain how to activate float switch earlier than that. I have one in my basement. But I need it to turn on earlier. Is it also possible to remove that switch and install a vertical water leveler. ?? Please. I really need your expertise
Where is the 5th video
A brilliant description of the problem. The solution however (putting your hand in the grey water and lifting the float up once a day) doesn’t work for me for obvious reasons.My search for a solution goes on.....
If that's too gross for you, you could just leave the float elevated so that it is always triggered, and turn the power off. Then, once a day, flick the switch on for x minutes.
Ever made that 5th video about the adjustment of the float switch??
Still waiting for the video you speak of.. Huh